Open CASCADE Technology  7.3.0
Static Public Member Functions

IntPatch_SpecialPoints Class Reference

#include <IntPatch_SpecialPoints.hxx>

Static Public Member Functions

static Standard_Boolean AddCrossUVIsoPoint (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const Standard_Real theTol3d, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False)
 Adds the point defined as intersection of two isolines (U = 0 and V = 0) on theQSurf in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf correspond to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S. More...
 
static Standard_Boolean AddPointOnUorVIso (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const Standard_Boolean theIsU, const math_Vector &theToler, const math_Vector &theInitPoint, const math_Vector &theInfBound, const math_Vector &theSupBound, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False)
 Adds the point lain strictly in the isoline U = 0 or V = 0 of theQSurf, in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf corresponds to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S. More...
 
static Standard_Boolean AddSingularPole (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &thePtIso, const Standard_Real theTol3d, IntPatch_Point &theVertex, IntSurf_PntOn2S &theAddedPoint, const Standard_Boolean theIsReversed=Standard_False, const Standard_Boolean theIsReqRefCheck=Standard_False)
 Computes the pole of sphere to add it in the intersection line. Stores the result in theAddedPoint variable (does not add in the line). At that, cone and sphere (with singularity) must be set in theQSurf parameter. By default (if theIsReversed == FALSE), theQSurf is the first surface of the Walking line. If it is not, theIsReversed parameter must be set to TRUE. theIsReqRefCheck is TRUE if and only if 3D-point of theRefPt must be pole or apex for check (e.g. if it is vertex). thePtIso is the reference point for obtaining isoline where must be placed the Apex/Pole. More...
 
static Standard_Boolean ContinueAfterSpecialPoint (const Handle< Adaptor3d_HSurface > &theQSurf, const Handle< Adaptor3d_HSurface > &thePSurf, const IntSurf_PntOn2S &theRefPt, const IntPatch_SpecPntType theSPType, const Standard_Real theTol2D, IntSurf_PntOn2S &theNewPoint, const Standard_Boolean theIsReversed=Standard_False)
 Special point has already been added in the line. Now, we need in correct prolongation of the line or in start new line. This function returns new point. More...
 
static void AdjustPointAndVertex (const IntSurf_PntOn2S &theRefPoint, const Standard_Real theArrPeriods[4], IntSurf_PntOn2S &theNewPoint, IntPatch_Point *const theVertex=0)
 Sets theNewPoint parameters in 2D-space the closest to theRefPoint with help of adding/subtracting corresponding periods. theArrPeriods must be filled as follows: {<U-period of 1st surface>, <V-period of 1st surface>, <U-period of 2nd surface>, <V-period of 2nd surface>}. If theVertex != 0 then its parameters will be filled as corresponding parameters of theNewPoint. More...
 

Member Function Documentation

◆ AddCrossUVIsoPoint()

static Standard_Boolean IntPatch_SpecialPoints::AddCrossUVIsoPoint ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S theRefPt,
const Standard_Real  theTol3d,
IntSurf_PntOn2S theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Adds the point defined as intersection of two isolines (U = 0 and V = 0) on theQSurf in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf correspond to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S.

◆ AddPointOnUorVIso()

static Standard_Boolean IntPatch_SpecialPoints::AddPointOnUorVIso ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S theRefPt,
const Standard_Boolean  theIsU,
const math_Vector theToler,
const math_Vector theInitPoint,
const math_Vector theInfBound,
const math_Vector theSupBound,
IntSurf_PntOn2S theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Adds the point lain strictly in the isoline U = 0 or V = 0 of theQSurf, in theLine. theRefPt is used to correct adjusting parameters. If theIsReversed is TRUE then theQSurf corresponds to the second (otherwise, the first) surface while forming intersection point IntSurf_PntOn2S.

◆ AddSingularPole()

static Standard_Boolean IntPatch_SpecialPoints::AddSingularPole ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S thePtIso,
const Standard_Real  theTol3d,
IntPatch_Point theVertex,
IntSurf_PntOn2S theAddedPoint,
const Standard_Boolean  theIsReversed = Standard_False,
const Standard_Boolean  theIsReqRefCheck = Standard_False 
)
static

Computes the pole of sphere to add it in the intersection line. Stores the result in theAddedPoint variable (does not add in the line). At that, cone and sphere (with singularity) must be set in theQSurf parameter. By default (if theIsReversed == FALSE), theQSurf is the first surface of the Walking line. If it is not, theIsReversed parameter must be set to TRUE. theIsReqRefCheck is TRUE if and only if 3D-point of theRefPt must be pole or apex for check (e.g. if it is vertex). thePtIso is the reference point for obtaining isoline where must be placed the Apex/Pole.

ATTENTION!!! theVertex must be initialized before calling the method .

◆ AdjustPointAndVertex()

static void IntPatch_SpecialPoints::AdjustPointAndVertex ( const IntSurf_PntOn2S theRefPoint,
const Standard_Real  theArrPeriods[4],
IntSurf_PntOn2S theNewPoint,
IntPatch_Point *const  theVertex = 0 
)
static

Sets theNewPoint parameters in 2D-space the closest to theRefPoint with help of adding/subtracting corresponding periods. theArrPeriods must be filled as follows: {<U-period of 1st surface>, <V-period of 1st surface>, <U-period of 2nd surface>, <V-period of 2nd surface>}. If theVertex != 0 then its parameters will be filled as corresponding parameters of theNewPoint.

ATTENTION!!! theNewPoint is not only Output parameter. It is Input/Output one. I.e. theNewPoint is reference point together with theRefPt.

◆ ContinueAfterSpecialPoint()

static Standard_Boolean IntPatch_SpecialPoints::ContinueAfterSpecialPoint ( const Handle< Adaptor3d_HSurface > &  theQSurf,
const Handle< Adaptor3d_HSurface > &  thePSurf,
const IntSurf_PntOn2S theRefPt,
const IntPatch_SpecPntType  theSPType,
const Standard_Real  theTol2D,
IntSurf_PntOn2S theNewPoint,
const Standard_Boolean  theIsReversed = Standard_False 
)
static

Special point has already been added in the line. Now, we need in correct prolongation of the line or in start new line. This function returns new point.

ATTENTION!!! theNewPoint is not only Output parameter. It is Input/Output one. I.e. theNewPoint is reference point together with theRefPt.


The documentation for this class was generated from the following file: