Open CASCADE Technology  7.3.0
Public Member Functions

GeomAPI_PointsToBSplineSurface Class Reference

This class is used to approximate or interpolate a BSplineSurface passing through an Array2 of points, with a given continuity. Describes functions for building a BSpline surface which approximates or interpolates a set of points. A PointsToBSplineSurface object provides a framework for: More...

#include <GeomAPI_PointsToBSplineSurface.hxx>

Public Member Functions

 GeomAPI_PointsToBSplineSurface ()
 Constructs an empty algorithm for approximation or interpolation of a surface. Use: More...
 
 GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D. More...
 
 GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D. More...
 
 GeomAPI_PointsToBSplineSurface (const TColgp_Array2OfPnt &Points, const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of points using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion. More...
 
 GeomAPI_PointsToBSplineSurface (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Points. More...
 
void Init (const TColgp_Array2OfPnt &Points, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D. More...
 
void Interpolate (const TColgp_Array2OfPnt &Points)
 Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2. More...
 
void Interpolate (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType)
 Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2. More...
 
void Init (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Points. More...
 
void Interpolate (const TColStd_Array2OfReal &ZPoints, const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY)
 Interpolates a BSpline Surface passing through an array of Points. More...
 
void Init (const TColgp_Array2OfPnt &Points, const Approx_ParametrizationType ParType, const Standard_Integer DegMin=3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D. More...
 
void Init (const TColgp_Array2OfPnt &Points, const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, const Standard_Integer DegMax=8, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Real Tol3D=1.0e-3)
 Approximates a BSpline Surface passing through an array of point using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion. More...
 
const Handle< Geom_BSplineSurface > & Surface () const
 Returns the approximate BSpline Surface. More...
 
 operator Handle< Geom_BSplineSurface > () const
 
Standard_Boolean IsDone () const
 

Detailed Description

This class is used to approximate or interpolate a BSplineSurface passing through an Array2 of points, with a given continuity. Describes functions for building a BSpline surface which approximates or interpolates a set of points. A PointsToBSplineSurface object provides a framework for:

Constructor & Destructor Documentation

◆ GeomAPI_PointsToBSplineSurface() [1/5]

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface ( )

Constructs an empty algorithm for approximation or interpolation of a surface. Use:

  • an Init function to define and build the BSpline surface by approximation, or
  • an Interpolate function to define and build the BSpline surface by interpolation.

◆ GeomAPI_PointsToBSplineSurface() [2/5]

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface ( const TColgp_Array2OfPnt Points,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D.

◆ GeomAPI_PointsToBSplineSurface() [3/5]

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface ( const TColgp_Array2OfPnt Points,
const Approx_ParametrizationType  ParType,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Points. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D.

◆ GeomAPI_PointsToBSplineSurface() [4/5]

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface ( const TColgp_Array2OfPnt Points,
const Standard_Real  Weight1,
const Standard_Real  Weight2,
const Standard_Real  Weight3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of points using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion.

◆ GeomAPI_PointsToBSplineSurface() [5/5]

GeomAPI_PointsToBSplineSurface::GeomAPI_PointsToBSplineSurface ( const TColStd_Array2OfReal ZPoints,
const Standard_Real  X0,
const Standard_Real  dX,
const Standard_Real  Y0,
const Standard_Real  dY,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Points.

The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) )

The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

Member Function Documentation

◆ Init() [1/4]

void GeomAPI_PointsToBSplineSurface::Init ( const TColgp_Array2OfPnt Points,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D.

◆ Init() [2/4]

void GeomAPI_PointsToBSplineSurface::Init ( const TColStd_Array2OfReal ZPoints,
const Standard_Real  X0,
const Standard_Real  dX,
const Standard_Real  Y0,
const Standard_Real  dY,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Points.

The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) )

The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

◆ Init() [3/4]

void GeomAPI_PointsToBSplineSurface::Init ( const TColgp_Array2OfPnt Points,
const Approx_ParametrizationType  ParType,
const Standard_Integer  DegMin = 3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be in the range [Degmin,Degmax] 2- his continuity will be at least <Continuity> 3- the distance from the point <Points> to the BSpline will be lower to Tol3D.

◆ Init() [4/4]

void GeomAPI_PointsToBSplineSurface::Init ( const TColgp_Array2OfPnt Points,
const Standard_Real  Weight1,
const Standard_Real  Weight2,
const Standard_Real  Weight3,
const Standard_Integer  DegMax = 8,
const GeomAbs_Shape  Continuity = GeomAbs_C2,
const Standard_Real  Tol3D = 1.0e-3 
)

Approximates a BSpline Surface passing through an array of point using variational smoothing algorithm, which tries to minimize additional criterium: Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion.

◆ Interpolate() [1/3]

void GeomAPI_PointsToBSplineSurface::Interpolate ( const TColgp_Array2OfPnt Points)

Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2.

◆ Interpolate() [2/3]

void GeomAPI_PointsToBSplineSurface::Interpolate ( const TColgp_Array2OfPnt Points,
const Approx_ParametrizationType  ParType 
)

Interpolates a BSpline Surface passing through an array of Point. The resulting BSpline will have the following properties: 1- his degree will be 3. 2- his continuity will be C2.

◆ Interpolate() [3/3]

void GeomAPI_PointsToBSplineSurface::Interpolate ( const TColStd_Array2OfReal ZPoints,
const Standard_Real  X0,
const Standard_Real  dX,
const Standard_Real  Y0,
const Standard_Real  dY 
)

Interpolates a BSpline Surface passing through an array of Points.

The points will be constructed as follow: P(i,j) = gp_Pnt( X0 + (i-1)*dX , Y0 + (j-1)*dY , ZPoints(i,j) )

The resulting BSpline will have the following properties: 1- his degree will be 3 2- his continuity will be C2. 4- the parametrization of the surface will verify: S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

◆ IsDone()

Standard_Boolean GeomAPI_PointsToBSplineSurface::IsDone ( ) const

◆ operator Handle< Geom_BSplineSurface >()

GeomAPI_PointsToBSplineSurface::operator Handle< Geom_BSplineSurface > ( ) const

◆ Surface()

const Handle< Geom_BSplineSurface >& GeomAPI_PointsToBSplineSurface::Surface ( ) const

Returns the approximate BSpline Surface.


The documentation for this class was generated from the following file: