Open CASCADE Technology  7.2.0
Public Member Functions | Protected Types

HLRBRep_FaceData Class Reference

#include <HLRBRep_FaceData.hxx>

Public Member Functions

 HLRBRep_FaceData ()
 
void Set (const TopoDS_Face &FG, const TopAbs_Orientation Or, const Standard_Boolean Cl, const Standard_Integer NW)
 <Or> is the orientation of the face. <Cl> is true if the face belongs to a closed volume. <NW> is the number of wires ( or block of edges ) of the face. More...
 
void SetWire (const Standard_Integer WI, const Standard_Integer NE)
 Set <NE> the number of edges of the wire number <WI>. More...
 
void SetWEdge (const Standard_Integer WI, const Standard_Integer EWI, const Standard_Integer EI, const TopAbs_Orientation Or, const Standard_Boolean OutL, const Standard_Boolean Inte, const Standard_Boolean Dble, const Standard_Boolean IsoL)
 Set the edge number <EWI> of the wire <WI>. More...
 
Standard_Boolean Selected () const
 
void Selected (const Standard_Boolean B)
 
Standard_Boolean Back () const
 
void Back (const Standard_Boolean B)
 
Standard_Boolean Side () const
 
void Side (const Standard_Boolean B)
 
Standard_Boolean Closed () const
 
void Closed (const Standard_Boolean B)
 
Standard_Boolean Hiding () const
 
void Hiding (const Standard_Boolean B)
 
Standard_Boolean Simple () const
 
void Simple (const Standard_Boolean B)
 
Standard_Boolean Cut () const
 
void Cut (const Standard_Boolean B)
 
Standard_Boolean WithOutL () const
 
void WithOutL (const Standard_Boolean B)
 
Standard_Boolean Plane () const
 
void Plane (const Standard_Boolean B)
 
Standard_Boolean Cylinder () const
 
void Cylinder (const Standard_Boolean B)
 
Standard_Boolean Cone () const
 
void Cone (const Standard_Boolean B)
 
Standard_Boolean Sphere () const
 
void Sphere (const Standard_Boolean B)
 
Standard_Boolean Torus () const
 
void Torus (const Standard_Boolean B)
 
Standard_Real Size () const
 
void Size (const Standard_Real S)
 
TopAbs_Orientation Orientation () const
 
void Orientation (const TopAbs_Orientation O)
 
Handle< HLRAlgo_WiresBlock > & Wires ()
 
HLRBRep_SurfaceGeometry ()
 
Standard_ShortReal Tolerance () const
 

Protected Types

enum  EMaskFlags {
  EMaskOrient = 15, FMaskSelected = 16, FMaskBack = 32, FMaskSide = 64,
  FMaskClosed = 128, FMaskHiding = 256, FMaskSimple = 512, FMaskCut = 1024,
  FMaskWithOutL = 2048, FMaskPlane = 4096, FMaskCylinder = 8192, FMaskCone = 16384,
  FMaskSphere = 32768, FMaskTorus = 65536
}
 

Member Enumeration Documentation

◆ EMaskFlags

Enumerator
EMaskOrient 
FMaskSelected 
FMaskBack 
FMaskSide 
FMaskClosed 
FMaskHiding 
FMaskSimple 
FMaskCut 
FMaskWithOutL 
FMaskPlane 
FMaskCylinder 
FMaskCone 
FMaskSphere 
FMaskTorus 

Constructor & Destructor Documentation

◆ HLRBRep_FaceData()

HLRBRep_FaceData::HLRBRep_FaceData ( )

Member Function Documentation

◆ Back() [1/2]

Standard_Boolean HLRBRep_FaceData::Back ( ) const

◆ Back() [2/2]

void HLRBRep_FaceData::Back ( const Standard_Boolean  B)

◆ Closed() [1/2]

Standard_Boolean HLRBRep_FaceData::Closed ( ) const

◆ Closed() [2/2]

void HLRBRep_FaceData::Closed ( const Standard_Boolean  B)

◆ Cone() [1/2]

Standard_Boolean HLRBRep_FaceData::Cone ( ) const

◆ Cone() [2/2]

void HLRBRep_FaceData::Cone ( const Standard_Boolean  B)

◆ Cut() [1/2]

Standard_Boolean HLRBRep_FaceData::Cut ( ) const

◆ Cut() [2/2]

void HLRBRep_FaceData::Cut ( const Standard_Boolean  B)

◆ Cylinder() [1/2]

Standard_Boolean HLRBRep_FaceData::Cylinder ( ) const

◆ Cylinder() [2/2]

void HLRBRep_FaceData::Cylinder ( const Standard_Boolean  B)

◆ Geometry()

HLRBRep_Surface& HLRBRep_FaceData::Geometry ( )

◆ Hiding() [1/2]

Standard_Boolean HLRBRep_FaceData::Hiding ( ) const

◆ Hiding() [2/2]

void HLRBRep_FaceData::Hiding ( const Standard_Boolean  B)

◆ Orientation() [1/2]

TopAbs_Orientation HLRBRep_FaceData::Orientation ( ) const

◆ Orientation() [2/2]

void HLRBRep_FaceData::Orientation ( const TopAbs_Orientation  O)

◆ Plane() [1/2]

Standard_Boolean HLRBRep_FaceData::Plane ( ) const

◆ Plane() [2/2]

void HLRBRep_FaceData::Plane ( const Standard_Boolean  B)

◆ Selected() [1/2]

Standard_Boolean HLRBRep_FaceData::Selected ( ) const

◆ Selected() [2/2]

void HLRBRep_FaceData::Selected ( const Standard_Boolean  B)

◆ Set()

void HLRBRep_FaceData::Set ( const TopoDS_Face FG,
const TopAbs_Orientation  Or,
const Standard_Boolean  Cl,
const Standard_Integer  NW 
)

<Or> is the orientation of the face. <Cl> is true if the face belongs to a closed volume. <NW> is the number of wires ( or block of edges ) of the face.

◆ SetWEdge()

void HLRBRep_FaceData::SetWEdge ( const Standard_Integer  WI,
const Standard_Integer  EWI,
const Standard_Integer  EI,
const TopAbs_Orientation  Or,
const Standard_Boolean  OutL,
const Standard_Boolean  Inte,
const Standard_Boolean  Dble,
const Standard_Boolean  IsoL 
)

Set the edge number <EWI> of the wire <WI>.

◆ SetWire()

void HLRBRep_FaceData::SetWire ( const Standard_Integer  WI,
const Standard_Integer  NE 
)

Set <NE> the number of edges of the wire number <WI>.

◆ Side() [1/2]

Standard_Boolean HLRBRep_FaceData::Side ( ) const

◆ Side() [2/2]

void HLRBRep_FaceData::Side ( const Standard_Boolean  B)

◆ Simple() [1/2]

Standard_Boolean HLRBRep_FaceData::Simple ( ) const

◆ Simple() [2/2]

void HLRBRep_FaceData::Simple ( const Standard_Boolean  B)

◆ Size() [1/2]

Standard_Real HLRBRep_FaceData::Size ( ) const

◆ Size() [2/2]

void HLRBRep_FaceData::Size ( const Standard_Real  S)

◆ Sphere() [1/2]

Standard_Boolean HLRBRep_FaceData::Sphere ( ) const

◆ Sphere() [2/2]

void HLRBRep_FaceData::Sphere ( const Standard_Boolean  B)

◆ Tolerance()

Standard_ShortReal HLRBRep_FaceData::Tolerance ( ) const

◆ Torus() [1/2]

Standard_Boolean HLRBRep_FaceData::Torus ( ) const

◆ Torus() [2/2]

void HLRBRep_FaceData::Torus ( const Standard_Boolean  B)

◆ Wires()

Handle< HLRAlgo_WiresBlock >& HLRBRep_FaceData::Wires ( )

◆ WithOutL() [1/2]

Standard_Boolean HLRBRep_FaceData::WithOutL ( ) const

◆ WithOutL() [2/2]

void HLRBRep_FaceData::WithOutL ( const Standard_Boolean  B)

The documentation for this class was generated from the following file: