Open CASCADE Technology
7.3.0

Describes a surface of revolution (revolved surface). Such a surface is obtained by rotating a curve (called the "meridian") through a complete revolution about an axis (referred to as the "axis of revolution"). The curve and the axis must be in the same plane (the "reference plane" of the surface). Rotation around the axis of revolution in the trigonometric sense defines the u parametric direction. So the u parameter is an angle, and its origin is given by the position of the meridian on the surface. The parametric range for the u parameter is: [ 0, 2.*Pi ] The v parameter is that of the meridian. Note: A surface of revolution is built from a copy of the original meridian. As a result the original meridian is not modified when the surface is modified. The form of a surface of revolution is typically a general revolution surface (GeomAbs_RevolutionForm). It can be: More...
#include <Geom_SurfaceOfRevolution.hxx>
Public Member Functions  
Geom_SurfaceOfRevolution (const Handle< Geom_Curve > &C, const gp_Ax1 &A1)  
C : is the meridian or the referenced curve. A1 is the axis of revolution. The form of a SurfaceOfRevolution can be : . a general revolution surface (RevolutionForm), . a conical surface if the meridian is a line or a trimmed line (ConicalForm), . a cylindrical surface if the meridian is a line or a trimmed line parallel to the revolution axis (CylindricalForm), . a planar surface if the meridian is a line perpendicular to the revolution axis of the surface (PlanarForm). . a spherical surface, . a toroidal surface, . a quadric surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't selfintersects. More...  
void  SetAxis (const gp_Ax1 &A1) 
Changes the axis of revolution. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...  
void  SetDirection (const gp_Dir &V) 
Changes the direction of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...  
void  SetBasisCurve (const Handle< Geom_Curve > &C) 
Changes the revolved curve of the surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't selfintersects. More...  
void  SetLocation (const gp_Pnt &P) 
Changes the location point of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...  
gp_Ax1  Axis () const 
Returns the revolution axis of the surface. More...  
const gp_Pnt &  Location () const 
Returns the location point of the axis of revolution. More...  
gp_Ax2  ReferencePlane () const 
Computes the position of the reference plane of the surface defined by the basis curve and the symmetry axis. The location point is the location point of the revolution's axis, the XDirection of the plane is given by the revolution's axis and the orientation of the normal to the plane is given by the sense of revolution. More...  
void  UReverse () override 
Changes the orientation of this surface of revolution in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence: More...  
Standard_Real  UReversedParameter (const Standard_Real U) const override 
Computes the u parameter on the modified surface, when reversing its u parametric direction, for any point of u parameter U on this surface of revolution. In the case of a revolved surface: More...  
void  VReverse () override 
Changes the orientation of this surface of revolution in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence: More...  
Standard_Real  VReversedParameter (const Standard_Real V) const override 
Computes the v parameter on the modified surface, when reversing its v parametric direction, for any point of v parameter V on this surface of revolution. In the case of a revolved surface: More...  
virtual void  TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const override 
Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...  
virtual gp_GTrsf2d  ParametricTransformation (const gp_Trsf &T) const override 
Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...  
void  Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override 
Returns the parametric bounds U1, U2 , V1 and V2 of this surface. A surface of revolution is always complete, so U1 = 0, U2 = 2*PI. More...  
Standard_Boolean  IsUClosed () const override 
IsUClosed always returns true. More...  
Standard_Boolean  IsVClosed () const override 
IsVClosed returns true if the meridian of this surface of revolution is closed. More...  
Standard_Boolean  IsCNu (const Standard_Integer N) const override 
IsCNu always returns true. More...  
Standard_Boolean  IsCNv (const Standard_Integer N) const override 
IsCNv returns true if the degree of continuity of the meridian of this surface of revolution is at least N. Raised if N < 0. More...  
Standard_Boolean  IsUPeriodic () const override 
Returns True. More...  
Standard_Boolean  IsVPeriodic () const override 
IsVPeriodic returns true if the meridian of this surface of revolution is periodic. More...  
Handle< Geom_Curve >  UIso (const Standard_Real U) const override 
Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution. More...  
Handle< Geom_Curve >  VIso (const Standard_Real V) const override 
Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution. More...  
void  D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override 
Computes the point P (U, V) on the surface. U is the angle of the rotation around the revolution axis. The direction of this axis gives the sense of rotation. V is the parameter of the revolved curve. More...  
void  D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override 
Computes the current point and the first derivatives in the directions U and V. Raised if the continuity of the surface is not C1. More...  
void  D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override 
Computes the current point, the first and the second derivatives in the directions U and V. Raised if the continuity of the surface is not C2. More...  
void  D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override 
Computes the current point, the first,the second and the third derivatives in the directions U and V. Raised if the continuity of the surface is not C3. More...  
gp_Vec  DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override 
Computes the derivative of order Nu in the direction u and Nv in the direction v. More...  
void  Transform (const gp_Trsf &T) override 
Applies the transformation T to this surface of revolution. More...  
Handle< Geom_Geometry >  Copy () const override 
Creates a new object which is a copy of this surface of revolution. More...  
Public Member Functions inherited from Geom_SweptSurface  
GeomAbs_Shape  Continuity () const override 
returns the continuity of the surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the surface, C2 : continuity of the second derivative all along the surface, C3 : continuity of the third derivative all along the surface, G1 : tangency continuity all along the surface, G2 : curvature continuity all along the surface, CN : the order of continuity is infinite. More...  
const gp_Dir &  Direction () const 
Returns the reference direction of the swept surface. For a surface of revolution it is the direction of the revolution axis, for a surface of linear extrusion it is the direction of extrusion. More...  
Handle< Geom_Curve >  BasisCurve () const 
Returns the referenced curve of the surface. For a surface of revolution it is the revolution curve, for a surface of linear extrusion it is the extruded curve. More...  
Public Member Functions inherited from Geom_Surface  
Handle< Geom_Surface >  UReversed () const 
Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...  
Handle< Geom_Surface >  VReversed () const 
Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...  
virtual Standard_Real  UPeriod () const 
Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More...  
virtual Standard_Real  VPeriod () const 
Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...  
gp_Pnt  Value (const Standard_Real U, const Standard_Real V) const 
Computes the point of parameter U on the surface. More...  
Public Member Functions inherited from Geom_Geometry  
void  Mirror (const gp_Pnt &P) 
Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...  
void  Mirror (const gp_Ax1 &A1) 
Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...  
void  Mirror (const gp_Ax2 &A2) 
Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...  
void  Rotate (const gp_Ax1 &A1, const Standard_Real Ang) 
Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...  
void  Scale (const gp_Pnt &P, const Standard_Real S) 
Scales a Geometry. S is the scaling value. More...  
void  Translate (const gp_Vec &V) 
Translates a Geometry. V is the vector of the tanslation. More...  
void  Translate (const gp_Pnt &P1, const gp_Pnt &P2) 
Translates a Geometry from the point P1 to the point P2. More...  
Handle< Geom_Geometry >  Mirrored (const gp_Pnt &P) const 
Handle< Geom_Geometry >  Mirrored (const gp_Ax1 &A1) const 
Handle< Geom_Geometry >  Mirrored (const gp_Ax2 &A2) const 
Handle< Geom_Geometry >  Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const 
Handle< Geom_Geometry >  Scaled (const gp_Pnt &P, const Standard_Real S) const 
Handle< Geom_Geometry >  Transformed (const gp_Trsf &T) const 
Handle< Geom_Geometry >  Translated (const gp_Vec &V) const 
Handle< Geom_Geometry >  Translated (const gp_Pnt &P1, const gp_Pnt &P2) const 
Public Member Functions inherited from Standard_Transient  
Standard_Transient ()  
Empty constructor. More...  
Standard_Transient (const Standard_Transient &)  
Copy constructor – does nothing. More...  
Standard_Transient &  operator= (const Standard_Transient &) 
Assignment operator, needed to avoid copying reference counter. More...  
virtual  ~Standard_Transient () 
Destructor must be virtual. More...  
virtual void  Delete () const 
Memory deallocator for transient classes. More...  
virtual const opencascade::handle< Standard_Type > &  DynamicType () const 
Returns a type descriptor about this object. More...  
Standard_Boolean  IsInstance (const opencascade::handle< Standard_Type > &theType) const 
Returns a true value if this is an instance of Type. More...  
Standard_Boolean  IsInstance (const Standard_CString theTypeName) const 
Returns a true value if this is an instance of TypeName. More...  
Standard_Boolean  IsKind (const opencascade::handle< Standard_Type > &theType) const 
Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...  
Standard_Boolean  IsKind (const Standard_CString theTypeName) const 
Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...  
Standard_Transient *  This () const 
Returns nonconst pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...  
Standard_Integer  GetRefCount () const 
Get the reference counter of this object. More...  
void  IncrementRefCounter () const 
Increments the reference counter of this object. More...  
Standard_Integer  DecrementRefCounter () const 
Decrements the reference counter of this object; returns the decremented value. More...  
Additional Inherited Members  
Public Types inherited from Standard_Transient  
typedef void  base_type 
Returns a type descriptor about this object. More...  
Static Public Member Functions inherited from Standard_Transient  
static const char *  get_type_name () 
Returns a type descriptor about this object. More...  
static const opencascade::handle< Standard_Type > &  get_type_descriptor () 
Returns type descriptor of Standard_Transient class. More...  
Protected Attributes inherited from Geom_SweptSurface  
Handle< Geom_Curve >  basisCurve 
gp_Dir  direction 
GeomAbs_Shape  smooth 
Describes a surface of revolution (revolved surface). Such a surface is obtained by rotating a curve (called the "meridian") through a complete revolution about an axis (referred to as the "axis of revolution"). The curve and the axis must be in the same plane (the "reference plane" of the surface). Rotation around the axis of revolution in the trigonometric sense defines the u parametric direction. So the u parameter is an angle, and its origin is given by the position of the meridian on the surface. The parametric range for the u parameter is: [ 0, 2.*Pi ] The v parameter is that of the meridian. Note: A surface of revolution is built from a copy of the original meridian. As a result the original meridian is not modified when the surface is modified. The form of a surface of revolution is typically a general revolution surface (GeomAbs_RevolutionForm). It can be:
Geom_SurfaceOfRevolution::Geom_SurfaceOfRevolution  (  const Handle< Geom_Curve > &  C, 
const gp_Ax1 &  A1  
) 
C : is the meridian or the referenced curve. A1 is the axis of revolution. The form of a SurfaceOfRevolution can be : . a general revolution surface (RevolutionForm), . a conical surface if the meridian is a line or a trimmed line (ConicalForm), . a cylindrical surface if the meridian is a line or a trimmed line parallel to the revolution axis (CylindricalForm), . a planar surface if the meridian is a line perpendicular to the revolution axis of the surface (PlanarForm). . a spherical surface, . a toroidal surface, . a quadric surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't selfintersects.
gp_Ax1 Geom_SurfaceOfRevolution::Axis  (  )  const 
Returns the revolution axis of the surface.

overridevirtual 
Returns the parametric bounds U1, U2 , V1 and V2 of this surface. A surface of revolution is always complete, so U1 = 0, U2 = 2*PI.
Implements Geom_Surface.

overridevirtual 
Creates a new object which is a copy of this surface of revolution.
Implements Geom_Geometry.

overridevirtual 
Computes the point P (U, V) on the surface. U is the angle of the rotation around the revolution axis. The direction of this axis gives the sense of rotation. V is the parameter of the revolved curve.
Implements Geom_Surface.

overridevirtual 
Computes the current point and the first derivatives in the directions U and V. Raised if the continuity of the surface is not C1.
Implements Geom_Surface.

overridevirtual 
Computes the current point, the first and the second derivatives in the directions U and V. Raised if the continuity of the surface is not C2.
Implements Geom_Surface.

overridevirtual 
Computes the current point, the first,the second and the third derivatives in the directions U and V. Raised if the continuity of the surface is not C3.
Implements Geom_Surface.

overridevirtual 
Computes the derivative of order Nu in the direction u and Nv in the direction v.
Raised if the continuity of the surface is not CNu in the u direction and CNv in the v direction. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0. The following functions evaluates the local derivatives on surface. Useful to manage discontinuities on the surface. if Side = 1 > P = S( U+,V ) if Side = 1 > P = S( U,V ) else P is betveen discontinuities can be evaluated using methods of global evaluations P = S( U ,V )
Implements Geom_Surface.

overridevirtual 
IsCNu always returns true.
Implements Geom_Surface.

overridevirtual 
IsCNv returns true if the degree of continuity of the meridian of this surface of revolution is at least N. Raised if N < 0.
Implements Geom_Surface.

overridevirtual 
IsUClosed always returns true.
Implements Geom_Surface.

overridevirtual 
Returns True.
Implements Geom_Surface.

overridevirtual 
IsVClosed returns true if the meridian of this surface of revolution is closed.
Implements Geom_Surface.

overridevirtual 
IsVPeriodic returns true if the meridian of this surface of revolution is periodic.
Implements Geom_Surface.
const gp_Pnt& Geom_SurfaceOfRevolution::Location  (  )  const 
Returns the location point of the axis of revolution.

overridevirtual 
Returns a 2d transformation used to find the new parameters of a point on the transformed surface.
me>Transformed(T)>Value(U',V')
is the same point as
me>Value(U,V).Transformed(T)
Where U',V' are obtained by transforming U,V with th 2d transformation returned by
me>ParametricTransformation(T)
This methods returns a scale centered on the U axis with BasisCurve()>ParametricTransformation(T)
Reimplemented from Geom_Surface.
gp_Ax2 Geom_SurfaceOfRevolution::ReferencePlane  (  )  const 
Computes the position of the reference plane of the surface defined by the basis curve and the symmetry axis. The location point is the location point of the revolution's axis, the XDirection of the plane is given by the revolution's axis and the orientation of the normal to the plane is given by the sense of revolution.
Raised if the revolved curve is not planar or if the revolved curve and the symmetry axis are not in the same plane or if the maximum of distance between the axis and the revolved curve is lower or equal to Resolution from gp.
void Geom_SurfaceOfRevolution::SetAxis  (  const gp_Ax1 &  A1  ) 
Changes the axis of revolution. Warnings : It is not checked that the axis is in the plane of the revolved curve.
void Geom_SurfaceOfRevolution::SetBasisCurve  (  const Handle< Geom_Curve > &  C  ) 
Changes the revolved curve of the surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't selfintersects.
void Geom_SurfaceOfRevolution::SetDirection  (  const gp_Dir &  V  ) 
Changes the direction of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve.
void Geom_SurfaceOfRevolution::SetLocation  (  const gp_Pnt &  P  ) 
Changes the location point of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve.

overridevirtual 
Applies the transformation T to this surface of revolution.
Implements Geom_Geometry.

overridevirtual 
Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.
me>Transformed(T)>Value(U',V')
is the same point as
me>Value(U,V).Transformed(T)
Where U',V' are the new values of U,V after calling
me>TranformParameters(U,V,T)
This methods multiplies V by BasisCurve()>ParametricTransformation(T)
Reimplemented from Geom_Surface.

overridevirtual 
Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution.
Implements Geom_Surface.

overridevirtual 
Changes the orientation of this surface of revolution in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence:
Implements Geom_Surface.

overridevirtual 
Computes the u parameter on the modified surface, when reversing its u parametric direction, for any point of u parameter U on this surface of revolution. In the case of a revolved surface:
Implements Geom_Surface.

overridevirtual 
Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution.
Implements Geom_Surface.

overridevirtual 
Changes the orientation of this surface of revolution in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence:
Implements Geom_Surface.

overridevirtual 
Computes the v parameter on the modified surface, when reversing its v parametric direction, for any point of v parameter V on this surface of revolution. In the case of a revolved surface:
Implements Geom_Surface.