Open CASCADE Technology  7.3.0
Public Member Functions | Protected Attributes

Geom2d_Conic Class Referenceabstract

The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic. More...

#include <Geom2d_Conic.hxx>

Inheritance diagram for Geom2d_Conic:
Inheritance graph
[legend]

Public Member Functions

void SetAxis (const gp_Ax22d &A)
 Modifies this conic, redefining its local coordinate system partially, by assigning P as its origin. More...
 
void SetXAxis (const gp_Ax2d &A)
 
void SetYAxis (const gp_Ax2d &A)
 Assigns the origin and unit vector of axis A to the origin of the local coordinate system of this conic and either: More...
 
void SetLocation (const gp_Pnt2d &P)
 Modifies this conic, redefining its local coordinate system fully, by assigning A as this coordinate system. More...
 
gp_Ax2d XAxis () const
 Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const&. More...
 
gp_Ax2d YAxis () const
 Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis". More...
 
virtual Standard_Real Eccentricity () const =0
 returns the eccentricity value of the conic e. e = 0 for a circle 0 < e < 1 for an ellipse (e = 0 if MajorRadius = MinorRadius) e > 1 for a hyperbola e = 1 for a parabola More...
 
gp_Pnt2d Location () const
 Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola. More...
 
const gp_Ax22dPosition () const
 Returns the local coordinates system of the conic. More...
 
void Reverse () override
 Reverses the direction of parameterization of <me>. The local coordinate system of the conic is modified. More...
 
virtual Standard_Real ReversedParameter (const Standard_Real U) const override=0
 Returns the parameter on the reversed curve for the point of parameter U on <me>. More...
 
GeomAbs_Shape Continuity () const override
 Returns GeomAbs_CN which is the global continuity of any conic. More...
 
Standard_Boolean IsCN (const Standard_Integer N) const override
 Returns True, the order of continuity of a conic is infinite. More...
 
- Public Member Functions inherited from Geom2d_Curve
virtual Standard_Real TransformedParameter (const Standard_Real U, const gp_Trsf2d &T) const
 Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). More...
 
virtual Standard_Real ParametricTransformation (const gp_Trsf2d &T) const
 Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). More...
 
Handle< Geom2d_CurveReversed () const
 Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: More...
 
virtual Standard_Real FirstParameter () const =0
 Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite. More...
 
virtual Standard_Real LastParameter () const =0
 Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite. More...
 
virtual Standard_Boolean IsClosed () const =0
 Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp wich is a fixed criterion independant of the application. More...
 
virtual Standard_Boolean IsPeriodic () const =0
 Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. More...
 
virtual Standard_Real Period () const
 Returns thne period of this curve. raises if the curve is not periodic. More...
 
virtual void D0 (const Standard_Real U, gp_Pnt2d &P) const =0
 Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...
 
virtual void D1 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1) const =0
 Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. More...
 
virtual void D2 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2) const =0
 Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. More...
 
virtual void D3 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2, gp_Vec2d &V3) const =0
 Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. More...
 
virtual gp_Vec2d DN (const Standard_Real U, const Standard_Integer N) const =0
 For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if: More...
 
gp_Pnt2d Value (const Standard_Real U) const
 Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...
 
- Public Member Functions inherited from Geom2d_Geometry
void Mirror (const gp_Pnt2d &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. More...
 
void Mirror (const gp_Ax2d &A)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Rotate (const gp_Pnt2d &P, const Standard_Real Ang)
 Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt2d &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec2d &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
virtual void Transform (const gp_Trsf2d &T)=0
 Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. More...
 
Handle< Geom2d_GeometryMirrored (const gp_Pnt2d &P) const
 
Handle< Geom2d_GeometryMirrored (const gp_Ax2d &A) const
 
Handle< Geom2d_GeometryRotated (const gp_Pnt2d &P, const Standard_Real Ang) const
 
Handle< Geom2d_GeometryScaled (const gp_Pnt2d &P, const Standard_Real S) const
 
Handle< Geom2d_GeometryTransformed (const gp_Trsf2d &T) const
 
Handle< Geom2d_GeometryTranslated (const gp_Vec2d &V) const
 
Handle< Geom2d_GeometryTranslated (const gp_Pnt2d &P1, const gp_Pnt2d &P2) const
 
virtual Handle< Geom2d_GeometryCopy () const =0
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Protected Attributes

gp_Ax22d pos
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

The abstract class Conic describes the common behavior of conic curves in 2D space and, in particular, their general characteristics. The Geom2d package provides four specific classes of conics: Geom2d_Circle, Geom2d_Ellipse, Geom2d_Hyperbola and Geom2d_Parabola. A conic is positioned in the plane with a coordinate system (gp_Ax22d object), where the origin is the center of the conic (or the apex in case of a parabola). This coordinate system is the local coordinate system of the conic. It gives the conic an explicit orientation, determining the direction in which the parameter increases along the conic. The "X Axis" of the local coordinate system also defines the origin of the parameter of the conic.

Member Function Documentation

◆ Continuity()

GeomAbs_Shape Geom2d_Conic::Continuity ( ) const
overridevirtual

Returns GeomAbs_CN which is the global continuity of any conic.

Implements Geom2d_Curve.

◆ Eccentricity()

virtual Standard_Real Geom2d_Conic::Eccentricity ( ) const
pure virtual

returns the eccentricity value of the conic e. e = 0 for a circle 0 < e < 1 for an ellipse (e = 0 if MajorRadius = MinorRadius) e > 1 for a hyperbola e = 1 for a parabola

Implemented in Geom2d_Hyperbola, Geom2d_Ellipse, Geom2d_Parabola, and Geom2d_Circle.

◆ IsCN()

Standard_Boolean Geom2d_Conic::IsCN ( const Standard_Integer  N) const
overridevirtual

Returns True, the order of continuity of a conic is infinite.

Implements Geom2d_Curve.

◆ Location()

gp_Pnt2d Geom2d_Conic::Location ( ) const

Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the vertex of the parabola.

◆ Position()

const gp_Ax22d& Geom2d_Conic::Position ( ) const

Returns the local coordinates system of the conic.

◆ Reverse()

void Geom2d_Conic::Reverse ( )
overridevirtual

Reverses the direction of parameterization of <me>. The local coordinate system of the conic is modified.

Implements Geom2d_Curve.

◆ ReversedParameter()

virtual Standard_Real Geom2d_Conic::ReversedParameter ( const Standard_Real  U) const
overridepure virtual

Returns the parameter on the reversed curve for the point of parameter U on <me>.

Implements Geom2d_Curve.

Implemented in Geom2d_Ellipse, Geom2d_Hyperbola, Geom2d_Parabola, and Geom2d_Circle.

◆ SetAxis()

void Geom2d_Conic::SetAxis ( const gp_Ax22d A)

Modifies this conic, redefining its local coordinate system partially, by assigning P as its origin.

◆ SetLocation()

void Geom2d_Conic::SetLocation ( const gp_Pnt2d P)

Modifies this conic, redefining its local coordinate system fully, by assigning A as this coordinate system.

◆ SetXAxis()

void Geom2d_Conic::SetXAxis ( const gp_Ax2d A)

◆ SetYAxis()

void Geom2d_Conic::SetYAxis ( const gp_Ax2d A)

Assigns the origin and unit vector of axis A to the origin of the local coordinate system of this conic and either:

  • its "X Direction", or
  • its "Y Direction". The other unit vector of the local coordinate system of this conic is recomputed normal to A, without changing the orientation of the local coordinate system (right-handed or left-handed).

◆ XAxis()

gp_Ax2d Geom2d_Conic::XAxis ( ) const

Returns the "XAxis" of the conic. This axis defines the origin of parametrization of the conic. This axis and the "Yaxis" define the local coordinate system of the conic. -C++: return const&.

◆ YAxis()

gp_Ax2d Geom2d_Conic::YAxis ( ) const

Returns the "YAxis" of the conic. The "YAxis" is perpendicular to the "Xaxis".

Field Documentation

◆ pos

gp_Ax22d Geom2d_Conic::pos
protected

The documentation for this class was generated from the following file: