Open CASCADE Technology  7.3.0

Building 3rd-party libraries on Linux

Introduction

This document presents additional guidelines for building third-party products used by Open CASCADE Technology and samples on Linux platform.

The links for downloading the third-party products are available on the web site of OPEN CASCADE SAS at http://www.opencascade.com/content/3rd-party-components.

There are two types of third-party products, which are necessary to build OCCT:

  • Mandatory products:
    • Tcl/Tk 8.5 - 8.6;  
    • FreeType 2.4.10 - 2.5.3;
  • Optional products:
    • TBB 3.x - 4.x;
    • gl2ps 1.3.5 - 1.3.8;
    • FreeImage 3.14.1 - 3.16.0;
    • VTK 6.1.0.

Building Mandatory Third-party Products

Tcl/Tk

Tcl/Tk is required for DRAW test harness.

Installation from sources: Tcl

Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.

  1. Enter the unix sub-directory of the directory where the Tcl source files are located (TCL_SRC_DIR).
    cd TCL_SRC_DIR/unix   
    
  2. Run the configure command:

    configure --enable-gcc  --enable-shared --enable-threads --prefix=TCL_INSTALL_DIR   
    

    For a 64 bit platform also add –enable-64bit option to the command line.

  3. If the configure command has finished successfully, start the building process:
    make   
    
  4. If building is finished successfully, start the installation of Tcl. All binary and service files of the product will be copied to the directory defined by TCL_INSTALL_DIR
    make install   
    

Installation from sources: Tk

Download the necessary archive from http://www.tcl.tk/software/tcltk/download.html and unpack it.

  1. Enter the unix sub-directory of the directory where the Tk source files are located (TK_SRC_DIR)
    cd TK_SRC_DIR/unix   
    
  2. Run the configure command, where TCL_LIB_DIR is TCL_INSTALL_DIR/lib.

    configure --enable-gcc  --enable-shared --enable-threads --with-tcl=TCL_LIB_DIR  --prefix=TK_INSTALL_DIR   
    

    For a 64 bit platform also add –enable-64bit option to the command line.

  3. If the configure command has finished successfully, start the building process:
    make   
    
  4. If the building has finished successfully, start the installation of Tk. All binary and service files of the product will be copied to the directory defined by TK_INSTALL_DIR (usually it is TCL_INSTALL_DIR)
    make install   
    

FreeType

FreeType is required for text display in the 3D viewer. Download the necessary archive from http://sourceforge.net/projects/freetype/files/ and unpack it.

  1. Enter the directory where the source files of FreeType are located (FREETYPE_SRC_DIR).
    cd FREETYPE_SRC_DIR   
    
  2. Run the configure command:

    configure  --prefix=FREETYPE_INSTALL_DIR   
    

    For a 64 bit platform also add CFLAGS='-m64 -fPIC' CPPFLAGS='-m64 -fPIC' option to the command line.

  3. If the configure command has finished successfully, start the building process:
    make   
    
  4. If the building has finished successfully, start the installation of FreeType. All binary and service files of the product will be copied to the directory defined by FREETYPE_INSTALL_DIR
    make install   
    

Building Optional Third-party Products

TBB

This third-party product is installed with binaries from the archive that can be downloaded from http://threadingbuildingblocks.org. Go to the Download page, find the release version you need and pick the archive for Linux platform. To install, unpack the downloaded archive of TBB product.

gl2ps

Download the necessary archive from http://geuz.org/gl2ps/ and unpack it.

  1. Install or build cmake product from the source file.
  2. Start cmake in GUI mode with the directory where the source files of gl2ps are located:

    ccmake GL2PS_SRC_DIR   
    
    • Press [c] to make the initial configuration;
    • Define the necessary options in CMAKE_INSTALL_PREFIX
    • Press [c] to make the final configuration
    • Press [g] to generate Makefile and exit

    or just run the following command:

    cmake  –DCMAKE_INSTALL_PREFIX=GL2PS_INSTALL_DIR –DCMAKE_BUILD_TYPE=Release   
    
  3. Start the building of gl2ps:
    make   
    
  4. Start the installation of gl2ps. Binaries will be installed according to the CMAKE_INSTALL_PREFIX option.
    make install   
    

FreeImage

Download the necessary archive from http://sourceforge.net/projects/freeimage/files/Source%20Distribution/ and unpack it. The directory with unpacked sources is further referred to as FREEIMAGE_SRC_DIR.

  1. Modify FREEIMAGE_SRC_DIR/Source/OpenEXR/Imath/ImathMatrix.h: In line 60 insert the following:
    #include string.h   
    
  2. Enter the directory where the source files of FreeImage are located (FREEIMAGE_SRC_DIR).
    cd FREEIMAGE_SRC_DIR   
    
  3. Run the building process
    make   
    
  4. Run the installation process

    a. If you have the permission to write into directories /usr/include and /usr/lib, run the following command:

       make install   
    

    b. If you do not have this permission, you need to modify file FREEIMAGE_SRC_DIR/Makefile.gnu:

    Change lines 7-9 from:

    DESTDIR ?= /   
    INCDIR  ?= $(DESTDIR)/usr/include   
    INSTALLDIR  ?= $(DESTDIR)/usr/lib   
    

    to:

    DESTDIR  ?= $(DESTDIR)   
    INCDIR  ?= $(DESTDIR)/include   
    INSTALLDIR  ?= $(DESTDIR)/lib   
    

    Change lines 65-67 from:

    install  -m 644 -o root -g root $(HEADER) $(INCDIR)   
    install  -m 644 -o root -g root $(STATICLIB) $(INSTALLDIR)   
    install  -m 755 -o root -g root $(SHAREDLIB) $(INSTALLDIR)   
    

    to:

    install  -m 755 $(HEADER) $(INCDIR)   
    install  -m 755 $(STATICLIB) $(INSTALLDIR)   
    install  -m 755 $(SHAREDLIB) $(INSTALLDIR)
    

    Change line 70 from: 

    ldconfig
    

    to:

    \#ldconfig   
    

    Then run the installation process by the following command:

     make DESTDIR=FREEIMAGE_INSTALL_DIR  install   
    
  5. Clean temporary files
     make clean
    

VTK

You can download VTK sources from http://www.vtk.org/VTK/resources/software.html

The building procedure:

Download the necessary archive from http://www.vtk.org/VTK/resources/software.html and unpack it.

  1. Install or build cmake product from the source file.
  2. Start cmake in GUI mode with the directory where the source files of VTK are located:
    ccmake VTK_SRC_DIR
    
    • Press [c] to make the initial configuration
    • Define the necessary options in VTK_INSTALL_PREFIX
    • Press [c] to make the final configuration
    • Press [g] to generate Makefile and exit
  3. Start the building of VTK:
    make
    
  4. Start the installation of gl2ps. Binaries will be installed according to the VTK_INSTALL_PREFIX option.
    make install
    

Installation From Official Repositories

Debian-based distributives

All 3rd-party products required for building of OCCT could be installed from official repositories. You may install them from console using apt-get utility:

sudo apt-get install tcllib tklib tcl-dev tk-dev libfreetype-dev libxt-dev libxmu-dev libxi-dev libgl1-mesa-dev libglu1-mesa-dev libfreeimage-dev libtbb-dev libgl2ps-dev

To launch binaries built with WOK you need to install C shell and 32-bit libraries on x86_64 distributives:

# you may need to add i386 if not done already by command "dpkg --add-architecture i386"
sudo apt-get install csh libstdc++6:i386 libxt6:i386 libxext6:i386 libxmu6:i386

Building is possible with C++ compliant compiler:

sudo apt-get install g++