Open CASCADE Technology  7.2.0
Static Public Member Functions

TopAbs Class Reference

This package gives resources for Topology oriented applications such as : Topological Data Structure, Topological Algorithms. More...

#include <TopAbs.hxx>

Static Public Member Functions

static TopAbs_Orientation Compose (const TopAbs_Orientation Or1, const TopAbs_Orientation Or2)
 Compose the Orientation <Or1> and <Or2>. This composition is not symmetric (if you switch <Or1> and <Or2> the result is different). It assumes that <Or1> is the Orientation of a Shape S1 containing a Shape S2 of Orientation Or2. The result is the cumulated orientation of S2 in S1. The composition law is : More...
 
static TopAbs_Orientation Reverse (const TopAbs_Orientation Or)
 xchanges the interior/exterior status of the two sides. This is what happens when the sense of direction is reversed. The following rules apply: More...
 
static TopAbs_Orientation Complement (const TopAbs_Orientation Or)
 Reverses the interior/exterior status of each side of the object. So, to take the complement of an object means to reverse the interior/exterior status of its boundary, i.e. inside becomes outside. The method returns the complementary orientation, following the rules in the table below: FORWARD REVERSED REVERSED FORWARD INTERNAL EXTERNAL EXTERNAL INTERNAL. More...
 
static Standard_OStreamPrint (const TopAbs_ShapeEnum theShapeType, Standard_OStream &theStream)
 Prints the name of Shape type as a String on the Stream. More...
 
static Standard_OStreamPrint (const TopAbs_Orientation theOrientation, Standard_OStream &theStream)
 Prints the name of the Orientation as a String on the Stream. More...
 
static Standard_OStreamPrint (const TopAbs_State St, Standard_OStream &S)
 Prints the name of the State <St> as a String on the Stream <S> and returns <S>. More...
 
static Standard_CString ShapeTypeToString (TopAbs_ShapeEnum theType)
 Returns the string name for a given shape type. More...
 
static TopAbs_ShapeEnum ShapeTypeFromString (Standard_CString theTypeString)
 Returns the shape type from the given string identifier (using case-insensitive comparison). More...
 
static Standard_Boolean ShapeTypeFromString (Standard_CString theTypeString, TopAbs_ShapeEnum &theType)
 Determines the shape type from the given string identifier (using case-insensitive comparison). More...
 
static Standard_CString ShapeOrientationToString (TopAbs_Orientation theOrientation)
 Returns the string name for a given shape orientation. More...
 

Detailed Description

This package gives resources for Topology oriented applications such as : Topological Data Structure, Topological Algorithms.

It contains :

Member Function Documentation

◆ Complement()

static TopAbs_Orientation TopAbs::Complement ( const TopAbs_Orientation  Or)
static

Reverses the interior/exterior status of each side of the object. So, to take the complement of an object means to reverse the interior/exterior status of its boundary, i.e. inside becomes outside. The method returns the complementary orientation, following the rules in the table below: FORWARD REVERSED REVERSED FORWARD INTERNAL EXTERNAL EXTERNAL INTERNAL.

Complement complements the material side. Inside becomes outside.

◆ Compose()

static TopAbs_Orientation TopAbs::Compose ( const TopAbs_Orientation  Or1,
const TopAbs_Orientation  Or2 
)
static

Compose the Orientation <Or1> and <Or2>. This composition is not symmetric (if you switch <Or1> and <Or2> the result is different). It assumes that <Or1> is the Orientation of a Shape S1 containing a Shape S2 of Orientation Or2. The result is the cumulated orientation of S2 in S1. The composition law is :

\ Or2 FORWARD REVERSED INTERNAL EXTERNAL Or1 ----------------------------------— FORWARD | FORWARD REVERSED INTERNAL EXTERNAL | REVERSED | REVERSED FORWARD INTERNAL EXTERNAL | INTERNAL | INTERNAL INTERNAL INTERNAL INTERNAL | EXTERNAL | EXTERNAL EXTERNAL EXTERNAL EXTERNAL Note: The top corner in the table is the most important for the purposes of Open CASCADE topology and shape sharing.

◆ Print() [1/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_ShapeEnum  theShapeType,
Standard_OStream theStream 
)
inlinestatic

Prints the name of Shape type as a String on the Stream.

◆ Print() [2/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_Orientation  theOrientation,
Standard_OStream theStream 
)
inlinestatic

Prints the name of the Orientation as a String on the Stream.

◆ Print() [3/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_State  St,
Standard_OStream S 
)
static

Prints the name of the State <St> as a String on the Stream <S> and returns <S>.

◆ Reverse()

static TopAbs_Orientation TopAbs::Reverse ( const TopAbs_Orientation  Or)
static

xchanges the interior/exterior status of the two sides. This is what happens when the sense of direction is reversed. The following rules apply:

FORWARD REVERSED REVERSED FORWARD INTERNAL INTERNAL EXTERNAL EXTERNAL

Reverse exchange the material sides.

◆ ShapeOrientationToString()

static Standard_CString TopAbs::ShapeOrientationToString ( TopAbs_Orientation  theOrientation)
static

Returns the string name for a given shape orientation.

Parameters
theOrientationshape orientation
Returns
string identifier from the list FORWARD, REVERSED, INTERNAL, EXTERNAL

◆ ShapeTypeFromString() [1/2]

static TopAbs_ShapeEnum TopAbs::ShapeTypeFromString ( Standard_CString  theTypeString)
inlinestatic

Returns the shape type from the given string identifier (using case-insensitive comparison).

Parameters
theTypeStringstring identifier
Returns
shape type or TopAbs_SHAPE if string identifier is invalid

◆ ShapeTypeFromString() [2/2]

static Standard_Boolean TopAbs::ShapeTypeFromString ( Standard_CString  theTypeString,
TopAbs_ShapeEnum theType 
)
static

Determines the shape type from the given string identifier (using case-insensitive comparison).

Parameters
theTypeStringstring identifier
theTypedetected shape type
Returns
TRUE if string identifier is known

◆ ShapeTypeToString()

static Standard_CString TopAbs::ShapeTypeToString ( TopAbs_ShapeEnum  theType)
static

Returns the string name for a given shape type.

Parameters
theTypeshape type
Returns
string identifier from the list COMPOUND, COMPSOLID, SOLID, SHELL, FACE, WIRE, EDGE, VERTEX, SHAPE

The documentation for this class was generated from the following file: