Open CASCADE Technology  7.2.0
Public Member Functions

Geom_ConicalSurface Class Reference

Describes a cone. A cone is defined by the half-angle at its apex, and is positioned in space by a coordinate system (a gp_Ax3 object) and a reference radius as follows: More...

#include <Geom_ConicalSurface.hxx>

Inheritance diagram for Geom_ConicalSurface:
Inheritance graph
[legend]

Public Member Functions

 Geom_ConicalSurface (const gp_Ax3 &A3, const Standard_Real Ang, const Standard_Real Radius)
 A3 defines the local coordinate system of the conical surface. Ang is the conical surface semi-angle ]0, PI/2[. Radius is the radius of the circle Viso in the placement plane of the conical surface defined with "XAxis" and "YAxis". The "ZDirection" of A3 defines the direction of the surface's axis of symmetry. If the location point of A3 is the apex of the surface Radius = 0 . At the creation the parametrization of the surface is defined such that the normal Vector (N = D1U ^ D1V) is oriented towards the "outside region" of the surface. More...
 
 Geom_ConicalSurface (const gp_Cone &C)
 Creates a ConicalSurface from a non transient Cone from package gp. More...
 
void SetCone (const gp_Cone &C)
 Set <me> so that <me> has the same geometric properties as C. More...
 
void SetRadius (const Standard_Real R)
 Changes the radius of the conical surface in the placement plane (Z = 0, V = 0). The local coordinate system is not modified. Raised if R < 0.0. More...
 
void SetSemiAngle (const Standard_Real Ang)
 Changes the semi angle of the conical surface. More...
 
gp_Cone Cone () const
 returns a non transient cone with the same geometric properties as <me>. More...
 
Standard_Real UReversedParameter (const Standard_Real U) const override
 return 2.PI - U. More...
 
Standard_Real VReversedParameter (const Standard_Real V) const override
 Computes the u (or v) parameter on the modified surface, when reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this cone. In the case of a cone, these functions return respectively: More...
 
virtual void VReverse () override
 Changes the orientation of this cone in the v parametric direction. The bounds of the surface are not changed but the v parametric direction is reversed. As a consequence, for a cone: More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const override
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const override
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
gp_Pnt Apex () const
 Computes the apex of this cone. It is on the negative side of the axis of revolution of this cone if the half-angle at the apex is positive, and on the positive side of the "main Axis" if the half-angle is negative. More...
 
void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override
 The conical surface is infinite in the V direction so V1 = Realfirst from Standard and V2 = RealLast. U1 = 0 and U2 = 2*PI. More...
 
void Coefficients (Standard_Real &A1, Standard_Real &A2, Standard_Real &A3, Standard_Real &B1, Standard_Real &B2, Standard_Real &B3, Standard_Real &C1, Standard_Real &C2, Standard_Real &C3, Standard_Real &D) const
 Returns the coefficients of the implicit equation of the quadric in the absolute cartesian coordinate system : These coefficients are normalized. A1.X**2 + A2.Y**2 + A3.Z**2 + 2.(B1.X.Y + B2.X.Z + B3.Y.Z) + 2.(C1.X + C2.Y + C3.Z) + D = 0.0. More...
 
Standard_Real RefRadius () const
 Returns the reference radius of this cone. The reference radius is the radius of the circle formed by the intersection of this cone and its reference plane (i.e. the plane defined by the origin, "X Direction" and "Y Direction" of the local coordinate system of this cone). If the apex of this cone is on the origin of the local coordinate system of this cone, the returned value is 0. More...
 
Standard_Real SemiAngle () const
 returns the semi-angle of the conical surface ]0.0, PI/2[. More...
 
Standard_Boolean IsUClosed () const override
 returns True. More...
 
Standard_Boolean IsVClosed () const override
 returns False. More...
 
Standard_Boolean IsUPeriodic () const override
 Returns True. More...
 
Standard_Boolean IsVPeriodic () const override
 Returns False. More...
 
Handle< Geom_CurveUIso (const Standard_Real U) const override
 Builds the U isoparametric line of this cone. The origin of this line is on the reference plane of this cone (i.e. the plane defined by the origin, "X Direction" and "Y Direction" of the local coordinate system of this cone). More...
 
Handle< Geom_CurveVIso (const Standard_Real V) const override
 Builds the V isoparametric circle of this cone. It is the circle on this cone, located in the plane of Z coordinate V*cos(Semi-Angle) in the local coordinate system of this cone. The "Axis" of this circle is the axis of revolution of this cone. Its starting point is defined by the "X Direction" of this cone. Warning If the V isoparametric circle is close to the apex of this cone, the radius of the circle becomes very small. It is possible to have a circle with radius equal to 0.0. More...
 
void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
 Computes the point P (U, V) on the surface. P (U, V) = Loc + (RefRadius + V * sin (Semi-Angle)) * (cos (U) * XDir + sin (U) * YDir) + V * cos (Semi-Angle) * ZDir where Loc is the origin of the placement plane (XAxis, YAxis) XDir is the direction of the XAxis and YDir the direction of the YAxis. More...
 
void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
 Computes the current point and the first derivatives in the directions U and V. More...
 
void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
 Computes the current point, the first and the second derivatives in the directions U and V. More...
 
void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
 Computes the current point, the first,the second and the third derivatives in the directions U and V. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
 Computes the derivative of order Nu in the u parametric direction, and Nv in the v parametric direction at the point of parameters (U, V) of this cone. Exceptions Standard_RangeError if: More...
 
void Transform (const gp_Trsf &T) override
 Applies the transformation T to this cone. More...
 
Handle< Geom_GeometryCopy () const override
 Creates a new object which is a copy of this cone. More...
 
- Public Member Functions inherited from Geom_ElementarySurface
void SetAxis (const gp_Ax1 &A1)
 Changes the main axis (ZAxis) of the elementary surface. More...
 
void SetLocation (const gp_Pnt &Loc)
 Changes the location of the local coordinates system of the surface. More...
 
void SetPosition (const gp_Ax3 &A3)
 Changes the local coordinates system of the surface. More...
 
gp_Ax1 Axis () const
 Returns the main axis of the surface (ZAxis). More...
 
gp_Pnt Location () const
 Returns the location point of the local coordinate system of the surface. More...
 
const gp_Ax3Position () const
 Returns the local coordinates system of the surface. More...
 
virtual void UReverse () override
 Reverses the U parametric direction of the surface. More...
 
GeomAbs_Shape Continuity () const override
 Returns GeomAbs_CN, the global continuity of any elementary surface. More...
 
Standard_Boolean IsCNu (const Standard_Integer N) const override
 Returns True. More...
 
Standard_Boolean IsCNv (const Standard_Integer N) const override
 Returns True. More...
 
- Public Member Functions inherited from Geom_Surface
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter U on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Attributes inherited from Geom_ElementarySurface
gp_Ax3 pos
 

Detailed Description

Describes a cone. A cone is defined by the half-angle at its apex, and is positioned in space by a coordinate system (a gp_Ax3 object) and a reference radius as follows:

Constructor & Destructor Documentation

◆ Geom_ConicalSurface() [1/2]

Geom_ConicalSurface::Geom_ConicalSurface ( const gp_Ax3 A3,
const Standard_Real  Ang,
const Standard_Real  Radius 
)

A3 defines the local coordinate system of the conical surface. Ang is the conical surface semi-angle ]0, PI/2[. Radius is the radius of the circle Viso in the placement plane of the conical surface defined with "XAxis" and "YAxis". The "ZDirection" of A3 defines the direction of the surface's axis of symmetry. If the location point of A3 is the apex of the surface Radius = 0 . At the creation the parametrization of the surface is defined such that the normal Vector (N = D1U ^ D1V) is oriented towards the "outside region" of the surface.

Raised if Radius < 0.0 or Ang < Resolution from gp or Ang >= PI/2 - Resolution

◆ Geom_ConicalSurface() [2/2]

Geom_ConicalSurface::Geom_ConicalSurface ( const gp_Cone C)

Creates a ConicalSurface from a non transient Cone from package gp.

Member Function Documentation

◆ Apex()

gp_Pnt Geom_ConicalSurface::Apex ( ) const

Computes the apex of this cone. It is on the negative side of the axis of revolution of this cone if the half-angle at the apex is positive, and on the positive side of the "main Axis" if the half-angle is negative.

◆ Bounds()

void Geom_ConicalSurface::Bounds ( Standard_Real U1,
Standard_Real U2,
Standard_Real V1,
Standard_Real V2 
) const
overridevirtual

The conical surface is infinite in the V direction so V1 = Realfirst from Standard and V2 = RealLast. U1 = 0 and U2 = 2*PI.

Implements Geom_Surface.

◆ Coefficients()

void Geom_ConicalSurface::Coefficients ( Standard_Real A1,
Standard_Real A2,
Standard_Real A3,
Standard_Real B1,
Standard_Real B2,
Standard_Real B3,
Standard_Real C1,
Standard_Real C2,
Standard_Real C3,
Standard_Real D 
) const

Returns the coefficients of the implicit equation of the quadric in the absolute cartesian coordinate system : These coefficients are normalized. A1.X**2 + A2.Y**2 + A3.Z**2 + 2.(B1.X.Y + B2.X.Z + B3.Y.Z) + 2.(C1.X + C2.Y + C3.Z) + D = 0.0.

◆ Cone()

gp_Cone Geom_ConicalSurface::Cone ( ) const

returns a non transient cone with the same geometric properties as <me>.

◆ Copy()

Handle< Geom_Geometry > Geom_ConicalSurface::Copy ( ) const
overridevirtual

Creates a new object which is a copy of this cone.

Implements Geom_Geometry.

◆ D0()

void Geom_ConicalSurface::D0 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P 
) const
overridevirtual

Computes the point P (U, V) on the surface. P (U, V) = Loc + (RefRadius + V * sin (Semi-Angle)) * (cos (U) * XDir + sin (U) * YDir) + V * cos (Semi-Angle) * ZDir where Loc is the origin of the placement plane (XAxis, YAxis) XDir is the direction of the XAxis and YDir the direction of the YAxis.

Implements Geom_Surface.

◆ D1()

void Geom_ConicalSurface::D1 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
overridevirtual

Computes the current point and the first derivatives in the directions U and V.

Implements Geom_Surface.

◆ D2()

void Geom_ConicalSurface::D2 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
overridevirtual

Computes the current point, the first and the second derivatives in the directions U and V.

Implements Geom_Surface.

◆ D3()

void Geom_ConicalSurface::D3 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
overridevirtual

Computes the current point, the first,the second and the third derivatives in the directions U and V.

Implements Geom_Surface.

◆ DN()

gp_Vec Geom_ConicalSurface::DN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
overridevirtual

Computes the derivative of order Nu in the u parametric direction, and Nv in the v parametric direction at the point of parameters (U, V) of this cone. Exceptions Standard_RangeError if:

  • Nu + Nv is less than 1,
  • Nu or Nv is negative.

Implements Geom_Surface.

◆ IsUClosed()

Standard_Boolean Geom_ConicalSurface::IsUClosed ( ) const
overridevirtual

returns True.

Implements Geom_Surface.

◆ IsUPeriodic()

Standard_Boolean Geom_ConicalSurface::IsUPeriodic ( ) const
overridevirtual

Returns True.

Implements Geom_Surface.

◆ IsVClosed()

Standard_Boolean Geom_ConicalSurface::IsVClosed ( ) const
overridevirtual

returns False.

Implements Geom_Surface.

◆ IsVPeriodic()

Standard_Boolean Geom_ConicalSurface::IsVPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom_Surface.

◆ ParametricTransformation()

virtual gp_GTrsf2d Geom_ConicalSurface::ParametricTransformation ( const gp_Trsf T) const
overridevirtual

Returns a 2d transformation used to find the new parameters of a point on the transformed surface.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are obtained by transforming U,V with th 2d transformation returned by

me->ParametricTransformation(T)

This methods returns a scale centered on the U axis with T.ScaleFactor

Reimplemented from Geom_Surface.

◆ RefRadius()

Standard_Real Geom_ConicalSurface::RefRadius ( ) const

Returns the reference radius of this cone. The reference radius is the radius of the circle formed by the intersection of this cone and its reference plane (i.e. the plane defined by the origin, "X Direction" and "Y Direction" of the local coordinate system of this cone). If the apex of this cone is on the origin of the local coordinate system of this cone, the returned value is 0.

◆ SemiAngle()

Standard_Real Geom_ConicalSurface::SemiAngle ( ) const

returns the semi-angle of the conical surface ]0.0, PI/2[.

◆ SetCone()

void Geom_ConicalSurface::SetCone ( const gp_Cone C)

Set <me> so that <me> has the same geometric properties as C.

◆ SetRadius()

void Geom_ConicalSurface::SetRadius ( const Standard_Real  R)

Changes the radius of the conical surface in the placement plane (Z = 0, V = 0). The local coordinate system is not modified. Raised if R < 0.0.

◆ SetSemiAngle()

void Geom_ConicalSurface::SetSemiAngle ( const Standard_Real  Ang)

Changes the semi angle of the conical surface.

Raised if Ang < Resolution or Ang >= PI/2 - Resolution

◆ Transform()

void Geom_ConicalSurface::Transform ( const gp_Trsf T)
overridevirtual

Applies the transformation T to this cone.

Implements Geom_Geometry.

◆ TransformParameters()

virtual void Geom_ConicalSurface::TransformParameters ( Standard_Real U,
Standard_Real V,
const gp_Trsf T 
) const
overridevirtual

Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are the new values of U,V after calling

me->TranformParameters(U,V,T)

This methods multiplies V by T.ScaleFactor()

Reimplemented from Geom_Surface.

◆ UIso()

Handle< Geom_Curve > Geom_ConicalSurface::UIso ( const Standard_Real  U) const
overridevirtual

Builds the U isoparametric line of this cone. The origin of this line is on the reference plane of this cone (i.e. the plane defined by the origin, "X Direction" and "Y Direction" of the local coordinate system of this cone).

Implements Geom_Surface.

◆ UReversedParameter()

Standard_Real Geom_ConicalSurface::UReversedParameter ( const Standard_Real  U) const
overridevirtual

return 2.PI - U.

Implements Geom_ElementarySurface.

◆ VIso()

Handle< Geom_Curve > Geom_ConicalSurface::VIso ( const Standard_Real  V) const
overridevirtual

Builds the V isoparametric circle of this cone. It is the circle on this cone, located in the plane of Z coordinate V*cos(Semi-Angle) in the local coordinate system of this cone. The "Axis" of this circle is the axis of revolution of this cone. Its starting point is defined by the "X Direction" of this cone. Warning If the V isoparametric circle is close to the apex of this cone, the radius of the circle becomes very small. It is possible to have a circle with radius equal to 0.0.

Implements Geom_Surface.

◆ VReverse()

virtual void Geom_ConicalSurface::VReverse ( )
overridevirtual

Changes the orientation of this cone in the v parametric direction. The bounds of the surface are not changed but the v parametric direction is reversed. As a consequence, for a cone:

  • the "main Direction" of the local coordinate system is reversed, and
  • the half-angle at the apex is inverted.

Reimplemented from Geom_ElementarySurface.

◆ VReversedParameter()

Standard_Real Geom_ConicalSurface::VReversedParameter ( const Standard_Real  V) const
overridevirtual

Computes the u (or v) parameter on the modified surface, when reversing its u (or v) parametric direction, for any point of u parameter U (or of v parameter V) on this cone. In the case of a cone, these functions return respectively:

  • 2.*Pi - U, -V.

Implements Geom_ElementarySurface.


The documentation for this class was generated from the following file: