Open CASCADE Technology  7.1.0.beta
Public Member Functions

XSControl_WorkSession Class Reference

This WorkSession completes the basic one, by adding : More...

#include <XSControl_WorkSession.hxx>

Inheritance diagram for XSControl_WorkSession:
Inheritance graph
[legend]

Public Member Functions

 XSControl_WorkSession ()
 
 ~XSControl_WorkSession ()
 
virtual void ClearData (const Standard_Integer theMode) override
 In addition to basic ClearData, clears Transfer and Management for interactive use, for mode = 0,1,2 and over 4 Plus : mode = 5 to clear Transfers (both ways) only mode = 6 to clear enforced results mode = 7 to clear transfers, results. More...
 
Standard_Boolean SelectNorm (const Standard_CString theNormName)
 Selects a Norm defined by its name. A Norm is described and handled by a Controller Returns True if done, False if <normname> is unknown. More...
 
void SetController (const Handle< XSControl_Controller > &theCtl)
 Selects a Norm defined by its Controller itself. More...
 
Standard_CString SelectedNorm (const Standard_Boolean theRsc=Standard_False) const
 Returns the name of the last Selected Norm. If none is defined, returns an empty string By default, returns the complete name of the norm If <rsc> is True, returns the short name used for resource. More...
 
const Handle< XSControl_Controller > & NormAdaptor () const
 Returns the norm controller itself. More...
 
const NCollection_DataMap< TCollection_AsciiString, Handle< Standard_Transient > > & Context () const
 Returns the current Context List, Null if not defined The Context is given to the TransientProcess for TransferRead. More...
 
void SetAllContext (const NCollection_DataMap< TCollection_AsciiString, Handle< Standard_Transient >> &theContext)
 Sets the current Context List, as a whole Sets it to the TransferReader. More...
 
void ClearContext ()
 Clears the whole current Context (nullifies it) More...
 
Standard_Boolean PrintTransferStatus (const Standard_Integer theNum, const Standard_Boolean theWri, const Handle< Message_Messenger > &theS) const
 Prints the transfer status of a transferred item, as beeing the Mapped n0 <num>, from MapWriter if <wri> is True, or from MapReader if <wri> is False Returns True when done, False else (i.e. num out of range) More...
 
void InitTransferReader (const Standard_Integer theMode)
 Sets a Transfer Reader, by internal ways, according mode : 0 recreates it clear, 1 clears it (does not recreate) 2 aligns Roots of TransientProcess from final Results 3 aligns final Results from Roots of TransientProcess 4 begins a new transfer (by BeginTransfer) 5 recreates TransferReader then begins a new transfer. More...
 
void SetTransferReader (const Handle< XSControl_TransferReader > &theTR)
 Sets a Transfer Reader, which manages transfers on reading. More...
 
const Handle< XSControl_TransferReader > & TransferReader () const
 Returns the Transfer Reader, Null if not set. More...
 
Handle< Transfer_TransientProcessMapReader () const
 Returns the TransientProcess(internal data for TransferReader) More...
 
Standard_Boolean SetMapReader (const Handle< Transfer_TransientProcess > &theTP)
 Changes the Map Reader, i.e. considers that the new one defines the relevant read results (forgets the former ones) Returns True when done, False in case of bad definition, i.e. if Model from TP differs from that of Session. More...
 
Handle< Standard_TransientResult (const Handle< Standard_Transient > &theEnt, const Standard_Integer theMode) const
 Returns the result attached to a starting entity If <mode> = 0, returns Final Result If <mode> = 1, considers Last Result If <mode> = 2, considers Final, else if absent, Last returns it as Transient, if result is not transient returns the Binder <mode> = 10,11,12 idem but returns the Binder itself (if it is not, e.g. Shape, returns the Binder) <mode> = 20, returns the ResultFromModel. More...
 
Standard_Integer TransferReadOne (const Handle< Standard_Transient > &theEnts)
 Commands the transfer of, either one entity, or a list I.E. calls the TransferReader after having analysed <ents> It is cumulated from the last BeginTransfer <ents> is processed by GiveList, hence : More...
 
Standard_Integer TransferReadRoots ()
 Commands the transfer of all the root entities of the model i.e. calls TransferRoot from the TransferReader with the Graph No cumulation with former calls to TransferReadOne. More...
 
Handle< Interface_InterfaceModelNewModel ()
 produces and returns a new Model well conditionned It is produced by the Norm Controller It can be Null (if this function is not implemented) More...
 
const Handle< XSControl_TransferWriter > & TransferWriter () const
 Returns the Transfer Reader, Null if not set. More...
 
Standard_Boolean SetMapWriter (const Handle< Transfer_FinderProcess > &theFP)
 Changes the Map Reader, i.e. considers that the new one defines the relevant read results (forgets the former ones) Returns True when done, False if <FP> is Null. More...
 
IFSelect_ReturnStatus TransferWriteShape (const TopoDS_Shape &theShape, const Standard_Boolean theCompGraph=Standard_True)
 Transfers a Shape from CasCade to a model of current norm, according to the last call to SetModeWriteShape Returns status :Done if OK, Fail if error during transfer, Error if transfer badly initialised. More...
 
Interface_CheckIterator TransferWriteCheckList () const
 Returns the check-list of last transfer (write) It is recorded in the FinderProcess, but it must be bound with resulting entities (in the resulting file model) rather than with original objects (in fact, their mappers) More...
 
const Handle< XSControl_Vars > & Vars () const
 
void SetVars (const Handle< XSControl_Vars > &theVars)
 
- Public Member Functions inherited from IFSelect_WorkSession
 IFSelect_WorkSession ()
 Creates a Work Session It provides default, empty ShareOut and ModelCopier, which can be replaced (if required, should be done just after creation). More...
 
void SetErrorHandle (const Standard_Boolean toHandle)
 Changes the Error Handler status (by default, it is not set) More...
 
Standard_Boolean ErrorHandle () const
 Returns the Error Handler status. More...
 
const Handle< IFSelect_ShareOut > & ShareOut () const
 Returns the ShareOut defined at creation time. More...
 
void SetShareOut (const Handle< IFSelect_ShareOut > &shareout)
 Sets a new ShareOut. Fills Items which its content Warning : data from the former ShareOut are lost. More...
 
void SetModeStat (const Standard_Boolean theMode)
 Set value of mode responsible for precence of selections after loading If mode set to true that different selections will be accessible after loading else selections will be not accessible after loading( for economy memory in applicatios) More...
 
Standard_Boolean GetModeStat () const
 Return value of mode defining of filling selection during loading. More...
 
void SetLibrary (const Handle< IFSelect_WorkLibrary > &theLib)
 Sets a WorkLibrary, which will be used to Read and Write Files. More...
 
const Handle< IFSelect_WorkLibrary > & WorkLibrary () const
 Returns the WorkLibrary. Null Handle if not yet set should be C++ : return const &. More...
 
void SetProtocol (const Handle< Interface_Protocol > &protocol)
 Sets a Protocol, which will be used to determine Graphs, to Read and to Write Files. More...
 
const Handle< Interface_Protocol > & Protocol () const
 Returns the Protocol. Null Handle if not yet set should be C++ : return const &. More...
 
void SetSignType (const Handle< IFSelect_Signature > &signtype)
 Sets a specific Signature to be the SignType, i.e. the Signature which will determine TypeName from the Model (basic function). It is recorded in the GTool This Signature is also set as "xst-sign-type" (reserved name) More...
 
Handle< IFSelect_SignatureSignType () const
 Returns the current SignType. More...
 
Standard_Boolean HasModel () const
 Returns True is a Model has been set. More...
 
void SetModel (const Handle< Interface_InterfaceModel > &model, const Standard_Boolean clearpointed=Standard_True)
 Sets a Model as input : this will be the Model from which the ShareOut will work if <clearpointed> is True (default) all SelectPointed items are cleared, else they must be managed by the caller Remark : SetModel clears the Graph, recomputes it if a Protocol is set and if the Model is not empty, of course. More...
 
const Handle< Interface_InterfaceModel > & Model () const
 Returns the Model of the Work Session (Null Handle if none) should be C++ : return const &. More...
 
void SetLoadedFile (const Standard_CString theFileName)
 Stores the filename used for read for setting the model It is cleared by SetModel and ClearData(1) More...
 
Standard_CString LoadedFile () const
 Returns the filename used to load current model empty if unknown. More...
 
IFSelect_ReturnStatus ReadFile (const Standard_CString filename)
 Reads a file with the WorkLibrary (sets Model and LoadedFile) Returns a integer status which can be : RetDone if OK, RetVoid if no Protocol not defined, RetError for file not found, RetFail if fail during read. More...
 
Standard_Integer NbStartingEntities () const
 Returns the count of Entities stored in the Model, or 0. More...
 
Handle< Standard_TransientStartingEntity (const Standard_Integer num) const
 Returns an Entity stored in the Model of the WorkSession (Null Handle is no Model or num out of range) More...
 
Standard_Integer StartingNumber (const Handle< Standard_Transient > &ent) const
 Returns the Number of an Entity in the Model (0 if no Model set or <ent> not in the Model) More...
 
Standard_Integer NumberFromLabel (const Standard_CString val, const Standard_Integer afternum=0) const
 From a given label in Model, returns the corresponding number Starts from first entity by Default, may start after a given number : this number may be given negative, its absolute value is then considered. Hence a loop on NumberFromLabel may be programmed (stop test is : returned value positive or null) More...
 
Handle< TCollection_HAsciiStringEntityLabel (const Handle< Standard_Transient > &ent) const
 Returns the label for <ent>, as the Model does If <ent> is not in the Model or if no Model is loaded, a Null Handle is returned. More...
 
Handle< TCollection_HAsciiStringEntityName (const Handle< Standard_Transient > &ent) const
 Returns the Name of an Entity This Name is computed by the general service Name Returns a Null Handle if fails. More...
 
Standard_Integer CategoryNumber (const Handle< Standard_Transient > &ent) const
 Returns the Category Number determined for an entity it is computed by the class Category An unknown entity (number 0) gives a value -1. More...
 
Standard_CString CategoryName (const Handle< Standard_Transient > &ent) const
 Returns the Category Name determined for an entity it is computed by the class Category Remark : an unknown entity gives an empty string. More...
 
Standard_CString ValidityName (const Handle< Standard_Transient > &ent) const
 Returns the Validity Name determined for an entity it is computed by the class SignValidity Remark : an unknown entity gives an empty string. More...
 
Standard_Boolean ComputeGraph (const Standard_Boolean enforce=Standard_False)
 Computes the Graph used for Selections, Displays ... If a HGraph is already set, with same model as given by method Model, does nothing. Else, computes a new Graph. If <enforce> is given True, computes a new Graph anyway. Remark that a call to ClearGraph will cause ComputeGraph to really compute a new Graph Returns True if Graph is OK, False else (i.e. if no Protocol is set, or if Model is absent or empty). More...
 
Handle< Interface_HGraphHGraph ()
 Returns the Computed Graph as HGraph (Null Handle if not set) More...
 
const Interface_GraphGraph ()
 Returns the Computed Graph, for Read only. More...
 
Handle< TColStd_HSequenceOfTransient > Shareds (const Handle< Standard_Transient > &ent)
 Returns the list of entities shared by <ent> (can be empty) Returns a null Handle if <ent> is unknown. More...
 
Handle< TColStd_HSequenceOfTransient > Sharings (const Handle< Standard_Transient > &ent)
 Returns the list of entities sharing <ent> (can be empty) Returns a null Handle if <ent> is unknown. More...
 
Standard_Boolean IsLoaded () const
 Returns True if a Model is defined and really loaded (not empty), a Protocol is set and a Graph has been computed. In this case, the WorkSession can start to work. More...
 
Standard_Boolean ComputeCheck (const Standard_Boolean enforce=Standard_False)
 Computes the CheckList for the Model currently loaded It can then be used for displays, querries ... Returns True if OK, False else (i.e. no Protocol set, or Model absent). If <enforce> is False, works only if not already done or if a new Model has been loaded from last call. Remark : computation is enforced by every call to SetModel or RunTransformer. More...
 
Interface_CheckIterator ModelCheckList (const Standard_Boolean complete=Standard_True)
 Returns the Check List for the Model currently loaded : <complete> = True : complete (syntactic & semantic messages), computed if not yet done <complete> = False : only syntactic (check file form) More...
 
Interface_CheckIterator CheckOne (const Handle< Standard_Transient > &ent, const Standard_Boolean complete=Standard_True)
 Returns a Check for a single entity, under the form of a CheckIterator (this gives only one form for the user) if <ent> is Null or equates the current Model, it gives the Global Check, else the Check for the given entity <complete> as for ModelCheckList. More...
 
Interface_CheckIterator LastRunCheckList () const
 Returns the Check List produced by the last execution of either : EvaluateFile(for Split), SendSplit, SendAll, SendSelected, RunTransformer-RunModifier Cleared by SetModel or ClearData(1) The field is protected, hence a specialized WorkSession may fill it. More...
 
Standard_Integer MaxIdent () const
 Returns the Maximum Value for an Item Identifier. It can be greater to the count of known Items, because some can have been removed. More...
 
Handle< Standard_TransientItem (const Standard_Integer id) const
 Returns an Item, given its Ident. Returns a Null Handle if no Item corresponds to this Ident. More...
 
Standard_Integer ItemIdent (const Handle< Standard_Transient > &item) const
 Returns the Ident attached to an Item in the WorkSession, or Zero if it is unknown. More...
 
Handle< Standard_TransientNamedItem (const Standard_CString name) const
 Returns the Item which corresponds to a Variable, given its Name (whatever the type of this Item). Returns a Null Handle if this Name is not recorded. More...
 
Handle< Standard_TransientNamedItem (const Handle< TCollection_HAsciiString > &name) const
 Same as above, but <name> is given through a Handle Especially Usefull with methods SelectionNames, etc... More...
 
Standard_Integer NameIdent (const Standard_CString name) const
 Returns the Ident attached to a Name, 0 if name not recorded. More...
 
Standard_Boolean HasName (const Handle< Standard_Transient > &item) const
 Returns True if an Item of the WorkSession has an attached Name. More...
 
Handle< TCollection_HAsciiStringName (const Handle< Standard_Transient > &item) const
 Returns the Name attached to an Item as a Variable of this WorkSession. If is Null or not recorded, returns an empty string. More...
 
Standard_Integer AddItem (const Handle< Standard_Transient > &item, const Standard_Boolean active=Standard_True)
 Adds an Item and returns its attached Ident. Does nothing if is already recorded (and returns its attached Ident) <active> if True commands call to SetActive (see below) Remark : the determined Ident is used if is a Dispatch, to fill the ShareOut. More...
 
Standard_Integer AddNamedItem (const Standard_CString name, const Handle< Standard_Transient > &item, const Standard_Boolean active=Standard_True)
 Adds an Item with an attached Name. If the Name is already known in the WorkSession, the older item losts it Returns Ident if Done, 0 else, i.e. if is null If <name> is empty, works as AddItem (i.e. with no name) If is already known but with no attached Name, this method tries to attached a Name to it <active> if True commands call to SetActive (see below) More...
 
Standard_Boolean SetActive (const Handle< Standard_Transient > &item, const Standard_Boolean mode)
 Following the type of : More...
 
Standard_Boolean RemoveNamedItem (const Standard_CString name)
 Removes an Item from the Session, given its Name Returns True if Done, False else (Name not recorded) (Applies only on Item which are Named) More...
 
Standard_Boolean RemoveName (const Standard_CString name)
 Removes a Name without removing the Item Returns True if Done, False else (Name not recorded) More...
 
Standard_Boolean RemoveItem (const Handle< Standard_Transient > &item)
 Removes an Item given its Ident. Returns False if <id> is attached to no Item in the WorkSession. For a Named Item, also removes its Name. More...
 
void ClearItems ()
 Clears all the recorded Items : Selections, Dispatches, Modifiers, and Strings & IntParams, with their Idents & Names. Remark that if a Model has been loaded, it is not cleared. More...
 
Handle< TCollection_HAsciiStringItemLabel (const Standard_Integer id) const
 Returns a Label which illustrates the content of an Item, given its Ident. This Label is : More...
 
Handle< TColStd_HSequenceOfInteger > ItemIdents (const Handle< Standard_Type > &type) const
 Fills a Sequence with the List of Idents attached to the Items of which Type complies with (IsKind) <type> (alphabetic order) Remark : <type> = TYPE(Standard_Transient) gives all the Idents which are suitable in the WorkSession. More...
 
Handle< TColStd_HSequenceOfHAsciiString > ItemNames (const Handle< Standard_Type > &type) const
 Fills a Sequence with the list of the Names attached to Items of which Type complies with (IsKind) <type> (alphabetic order) Remark : <type> = TYPE(Standard_Transient) gives all the Names. More...
 
Handle< TColStd_HSequenceOfHAsciiString > ItemNamesForLabel (const Standard_CString label) const
 Fills a Sequence with the NAMES of the control items, of which the label matches <label> (contain it) : see NextIdentForLabel Search mode is fixed to "contained" If <label> is empty, returns all Names. More...
 
Standard_Integer NextIdentForLabel (const Standard_CString label, const Standard_Integer id, const Standard_Integer mode=0) const
 For query by Label with possible iterations Searches the Ident of which Item has a Label which matches a given one, the search starts from an initial Ident. Returns the first found Ident which follows <id>, or ZERO. More...
 
Handle< Standard_TransientNewParamFromStatic (const Standard_CString statname, const Standard_CString name="")
 Creates a parameter as being bound to a Static If the Static is Integer, this creates an IntParam bound to it by its name. Else this creates a String which is the value of the Static. Returns a null handle if <statname> is unknown as a Static. More...
 
Handle< IFSelect_IntParamIntParam (const Standard_Integer id) const
 Returns an IntParam, given its Ident in the Session Null result if <id> is not suitable for an IntParam (undefined, or defined for another kind of variable) More...
 
Standard_Integer IntValue (const Handle< IFSelect_IntParam > &it) const
 Returns Integer Value of an IntParam. More...
 
Handle< IFSelect_IntParamNewIntParam (const Standard_CString name="")
 Creates a new IntParam. A Name can be set (Optional) Returns the created IntParam, or a Null Handle in case of Failure (see AddItem/AddNamedItem) More...
 
Standard_Boolean SetIntValue (const Handle< IFSelect_IntParam > &it, const Standard_Integer val)
 Changes the Integer Value of an IntParam Returns True if Done, False if <it> is not in the WorkSession. More...
 
Handle< TCollection_HAsciiStringTextParam (const Standard_Integer id) const
 Returns a TextParam, given its Ident in the Session Null result if <id> is not suitable for a TextParam (undefined, or defined for another kind of variable) More...
 
TCollection_AsciiString TextValue (const Handle< TCollection_HAsciiString > &par) const
 Returns Text Value of a TextParam (a String) or an empty string if <it> is not in the WorkSession. More...
 
Handle< TCollection_HAsciiStringNewTextParam (const Standard_CString name="")
 Creates a new (empty) TextParam. A Name can be set (Optional) Returns the created TextParam (as an HAsciiString), or a Null Handle in case of Failure (see AddItem/AddNamedItem) More...
 
Standard_Boolean SetTextValue (const Handle< TCollection_HAsciiString > &par, const Standard_CString val)
 Changes the Text Value of a TextParam (an HAsciiString) Returns True if Done, False if <it> is not in the WorkSession. More...
 
Handle< IFSelect_SignatureSignature (const Standard_Integer id) const
 Returns a Signature, given its Ident in the Session Null result if <id> is not suitable for a Signature (undefined, or defined for another kind of variable) More...
 
Standard_CString SignValue (const Handle< IFSelect_Signature > &sign, const Handle< Standard_Transient > &ent) const
 Returns the Value computed by a Signature for an Entity Returns an empty string if the entity does not belong to the loaded model. More...
 
Handle< IFSelect_SelectionSelection (const Standard_Integer id) const
 Returns a Selection, given its Ident in the Session Null result if <id> is not suitable for a Selection (undefined, or defined for another kind of variable) More...
 
Interface_EntityIterator EvalSelection (const Handle< IFSelect_Selection > &sel) const
 Evaluates the effect of a Selection applied on the input Model Returned Result remains empty if no input Model has been set. More...
 
IFSelect_SelectionIterator Sources (const Handle< IFSelect_Selection > &sel) const
 Returns the Selections which are source of Selection, given its rank in the List of Selections (see SelectionIterator) Returned value is empty if <num> is out of range or if <sel> is not in the WorkSession. More...
 
Handle< TColStd_HSequenceOfTransient > SelectionResult (const Handle< IFSelect_Selection > &sel) const
 Returns the result of a Selection, computed by EvalSelection (see above) under the form of a HSequence (hence, it can be used by a frontal-engine logic). It can be empty Returns a Null Handle if <sel> is not in the WorkSession. More...
 
Handle< TColStd_HSequenceOfTransient > SelectionResultFromList (const Handle< IFSelect_Selection > &sel, const Handle< TColStd_HSequenceOfTransient > &list) const
 Returns the result of a Selection, by forcing its input with a given list

unless

Null). RULES :

only for a SelectDeduct kind Selection : its Input is considered : if it is a SelectDeduct kind Selection, its Input is considered, etc... until an Input is not a Deduct/Extract : its result is replaced by

all the chain of deductions is applied. More...

 
Standard_Boolean SetItemSelection (const Handle< Standard_Transient > &item, const Handle< IFSelect_Selection > &sel)
 Sets a Selection as input for an item, according its type : if is a Dispatch : as Final Selection if is a GeneralModifier (i.e. any kind of Modifier) : as Selection used to filter entities to modify <sel> Null causes this Selection to be nullified Returns False if is not of a suitable type, or or <sel> is not in the WorkSession. More...
 
Standard_Boolean ResetItemSelection (const Handle< Standard_Transient > &item)
 Resets input Selection which was set by SetItemSelection Same conditions as for SetItemSelection Returns True if done, False if is not in the WorkSession. More...
 
Handle< IFSelect_SelectionItemSelection (const Handle< Standard_Transient > &item) const
 Returns the Selection of a Dispatch or a GeneralModifier. Returns a Null Handle if none is defined or not good type. More...
 
Handle< IFSelect_SignCounterSignCounter (const Standard_Integer id) const
 Returns a SignCounter from its ident in the Session Null result if <id> is not suitable for a SignCounter (undefined, or defined for another kind of variable) More...
 
Standard_Boolean ComputeCounter (const Handle< IFSelect_SignCounter > &counter, const Standard_Boolean forced=Standard_False)
 Computes the content of a SignCounter when it is defined with a Selection, then returns True Returns False if the SignCounter is not defined with a Selection, or if its Selection Mode is inhibited <forced> to work around optimisations. More...
 
Standard_Boolean ComputeCounterFromList (const Handle< IFSelect_SignCounter > &counter, const Handle< TColStd_HSequenceOfTransient > &list, const Standard_Boolean clear=Standard_True)
 Computes the content of a SignCounter from an input list If

Null, uses internal definition of the Counter : a Selection, else the whole Model (recomputation forced) If <clear> is True (D), starts from scratch Else, cumulates computations. More...

 
Handle< TColStd_HSequenceOfInteger > AppliedDispatches () const
 Returns the ordered list of dispatches stored by the ShareOut. More...
 
void ClearShareOut (const Standard_Boolean onlydisp)
 Clears the list of Dispatches recorded by the ShareOut if <only> disp is True, tha's all. Else, clears also the lists of Modifiers recorded by the ShareOut. More...
 
Handle< IFSelect_DispatchDispatch (const Standard_Integer id) const
 Returns a Dispatch, given its Ident in the Session Null result if <id> is not suitable for a Dispatch (undefined, or defined for another kind of variable) More...
 
Standard_Integer DispatchRank (const Handle< IFSelect_Dispatch > &disp) const
 Returns the rank of a Dispatch in the ShareOut, or 0 if <disp> is not in the ShareOut or not in the WorkSession. More...
 
const Handle< IFSelect_ModelCopier > & ModelCopier () const
 Gives access to the complete ModelCopier. More...
 
void SetModelCopier (const Handle< IFSelect_ModelCopier > &copier)
 Sets a new ModelCopier. Fills Items which its content. More...
 
Standard_Integer NbFinalModifiers (const Standard_Boolean formodel) const
 Returns the count of Modifiers applied to final sending Model Modifiers if <formodel> is True, File Modifiers else (i.e. Modifiers which apply once the Models have been filled) More...
 
Handle< TColStd_HSequenceOfInteger > FinalModifierIdents (const Standard_Boolean formodel) const
 Fills a Sequence with a list of Idents, those attached to the Modifiers applied to final sending. Model Modifiers if <formodel> is True, File Modifiers else This list is given in the order in which they will be applied (which takes into account the Changes to Modifier Ranks) More...
 
Handle< IFSelect_GeneralModifierGeneralModifier (const Standard_Integer id) const
 Returns a Modifier, given its Ident in the Session Null result if <id> is not suitable for a Modifier (undefined, or defined for another kind of variable) More...
 
Handle< IFSelect_ModifierModelModifier (const Standard_Integer id) const
 Returns a Model Modifier, given its Ident in the Session, i.e. typed as a Modifier (not simply a GeneralModifier) Null result if <id> is not suitable for a Modifier (undefined, or defined for another kind of variable) More...
 
Standard_Integer ModifierRank (const Handle< IFSelect_GeneralModifier > &item) const
 Returns the Rank of a Modifier given its Ident. Model or File Modifier according its type (ModelModifier or not) Remember that Modifiers are applied sequencially following their Rank : first Model Modifiers then File Modifiers Rank is given by rank of call to AddItem and can be changed by ChangeModifierRank. More...
 
Standard_Boolean ChangeModifierRank (const Standard_Boolean formodel, const Standard_Integer before, const Standard_Integer after)
 Changes the Rank of a Modifier in the Session : Model Modifiers if <formodel> is True, File Modifiers else the Modifier n0 <before> is put to n0 <after> Return True if Done, False if <before> or <after> out of range. More...
 
void ClearFinalModifiers ()
 Removes all the Modifiers active in the ModelCopier : they become inactive and they are removed from the Session. More...
 
Standard_Boolean SetAppliedModifier (const Handle< IFSelect_GeneralModifier > &modif, const Handle< Standard_Transient > &item)
 Sets a GeneralModifier to be applied to an item : More...
 
Standard_Boolean ResetAppliedModifier (const Handle< IFSelect_GeneralModifier > &modif)
 Resets a GeneralModifier to be applied Returns True if done, False if <modif> was not applied. More...
 
Handle< Standard_TransientUsesAppliedModifier (const Handle< IFSelect_GeneralModifier > &modif) const
 Returns the item on which a GeneralModifier is applied : the ShareOut, or a given Dispatch Returns a Null Handle if <modif> is not applied. More...
 
Handle< IFSelect_TransformerTransformer (const Standard_Integer id) const
 Returns a Transformer, given its Ident in the Session Null result if <id> is not suitable for a Transformer (undefined, or defined for another kind of variable) More...
 
Standard_Integer RunTransformer (const Handle< IFSelect_Transformer > &transf)
 Runs a Transformer on starting Model, which can then be edited or replaced by a new one. The Protocol can also be changed. Fills LastRunCheckList. More...
 
Standard_Integer RunModifier (const Handle< IFSelect_Modifier > &modif, const Standard_Boolean copy)
 Runs a Modifier on Starting Model. It can modify entities, or add new ones. But the Model or the Protocol is unchanged. The Modifier is applied on each entity of the Model. See also RunModifierSelected Fills LastRunCheckList. More...
 
Standard_Integer RunModifierSelected (const Handle< IFSelect_Modifier > &modif, const Handle< IFSelect_Selection > &sel, const Standard_Boolean copy)
 Acts as RunModifier, but the Modifier is applied on the list determined by a Selection, rather than on the whole Model If the selection is a null handle, the whole model is taken. More...
 
Handle< IFSelect_TransformerNewTransformStandard (const Standard_Boolean copy, const Standard_CString name="")
 Creates and returns a TransformStandard, empty, with its Copy Option (True = Copy, False = On the Spot) and an optional name. To a TransformStandard, the method SetAppliedModifier applies. More...
 
Standard_Boolean SetModelContent (const Handle< IFSelect_Selection > &sel, const Standard_Boolean keep)
 Defines a new content from the former one If <keep> is True, it is given by entities selected by Selection <sel> (and all shared entities) Else, it is given by all the former content but entities selected by the Selection <sel> (and properly shared ones) Returns True if done. Returns False if the selected list (from <sel>) is empty, hence nothing is done. More...
 
Handle< TCollection_HAsciiStringFilePrefix () const
 Returns the defined File Prefix. Null Handle if not defined. More...
 
Handle< TCollection_HAsciiStringDefaultFileRoot () const
 Returns the defined Default File Root. It is used for Dispatches which have no specific root attached. Null Handle if not defined. More...
 
Handle< TCollection_HAsciiStringFileExtension () const
 Returns the defined File Extension. Null Handle if not defined. More...
 
Handle< TCollection_HAsciiStringFileRoot (const Handle< IFSelect_Dispatch > &disp) const
 Returns the File Root defined for a Dispatch. Null if no Root Name is defined for it (hence, no File will be produced) More...
 
void SetFilePrefix (const Standard_CString name)
 Defines a File Prefix. More...
 
Standard_Boolean SetDefaultFileRoot (const Standard_CString name)
 Defines a Default File Root Name. Clears it is <name> = "" Returns True if OK, False if <name> already set for a Dispatch. More...
 
void SetFileExtension (const Standard_CString name)
 Defines a File Extension. More...
 
Standard_Boolean SetFileRoot (const Handle< IFSelect_Dispatch > &disp, const Standard_CString name)
 Defines a Root for a Dispatch If <name> is empty, clears Root Name This has as effect to inhibit the production of File by <disp> Returns False if <disp> is not in the WorkSession or if a root name is already defined for it. More...
 
Standard_CString GiveFileRoot (const Standard_CString file) const
 Extracts File Root Name from a given complete file name (uses OSD_Path) More...
 
Standard_CString GiveFileComplete (const Standard_CString file) const
 Completes a file name as required, with Prefix and Extension (if defined; for a non-defined item, completes nothing) More...
 
void ClearFile ()
 Erases all stored data from the File Evaluation (i.e. ALL former naming informations are lost) More...
 
void EvaluateFile ()
 Performs and stores a File Evaluation. The Results are a List of produced Models and a List of names (Strings), in parallel Fills LastRunCheckList. More...
 
Standard_Integer NbFiles () const
 Returns the count of produced Models. More...
 
Handle< Interface_InterfaceModelFileModel (const Standard_Integer num) const
 Returns a Model, given its rank in the Evaluation List. More...
 
TCollection_AsciiString FileName (const Standard_Integer num) const
 Returns the name of a file corresponding to a produced Model, given its rank in the Evaluation List. More...
 
void BeginSentFiles (const Standard_Boolean record)
 Commands file sending to clear the list of already sent files, commands to record a new one if <record> is True This list is managed by the ModelCopier when SendSplit is called It allows a global exploitation of the set of sent files. More...
 
Handle< TColStd_HSequenceOfHAsciiString > SentFiles () const
 Returns the list of recorded sent files, or a Null Handle is recording has not been enabled. More...
 
Standard_Boolean SendSplit ()
 Performs creation of derived files from the input Model Takes its data (sub-models and names), from result EvaluateFile if active, else by dynamic Evaluation (not stored) After SendSplit, result of EvaluateFile is Cleared Fills LastRunCheckList. More...
 
Handle< IFSelect_PacketListEvalSplit () const
 Returns an Evaluation of the whole ShareOut definition : i.e. how the entities of the starting model are forecast to be sent to various files : list of packets according the dispatches, effective lists of roots for each packet (which determine the content of the corresponding file); plus evaluation of which entities are : forgotten (sent into no file), duplicated (sent into more than one file), sent into a given file. See the class PacketList for more details. More...
 
Interface_EntityIterator SentList (const Standard_Integer count=-1) const
 Returns the list of Entities sent in files, accourding the count of files each one has been sent (these counts are reset by SetModel or SetRemaining(Forget) ) stored in Graph Status <count> = -1 (default) is for ENtities sent at least once <count> = 0 is for the Remaining List (entities not yet sent) <count> = 1 is for entities sent in one and only one file (the ideal case) Remaining Data are computed on each Sending/Copying output files (see methods EvaluateFile and SendSplit) Graph Status is 0 for Remaining Entity, <count> for Sent into <count> files This status is set to 0 (not yet sent) for all by SetModel and by SetRemaining(mode=Forget,Display) More...
 
Standard_Integer MaxSendingCount () const
 Returns the greater count of different files in which any of the starting entities could be sent. Before any file output, this count is 0. Ideal count is 1. More than 1 means that duplications occur. More...
 
Standard_Boolean SetRemaining (const IFSelect_RemainMode mode)
 Processes Remaining data (after having sent files), mode : Forget : forget remaining info (i.e. clear all "Sent" status) Compute : compute and keep remaining (does nothing if : remaining is empty or if no files has been sent) Display : display entities recorded as remaining Undo : restore former state of data (after Remaining(1) ) Returns True if OK, False else (i.e. mode = 2 and Remaining List is either empty or takes all the entities, or mode = 3 and no former computation of remaining data was done) More...
 
IFSelect_ReturnStatus SendAll (const Standard_CString filename, const Standard_Boolean computegraph=Standard_False)
 Sends the starting Model into one file, without splitting, managing remaining data or anything else. <computegraph> true commands the Graph to be recomputed before sending : required when a Model is filled in several steps. More...
 
IFSelect_ReturnStatus SendSelected (const Standard_CString filename, const Handle< IFSelect_Selection > &sel, const Standard_Boolean computegraph=Standard_False)
 Sends a part of the starting Model into one file, without splitting. But remaining data are managed. <computegraph> true commands the Graph to be recomputed before sending : required when a Model is filled in several steps. More...
 
IFSelect_ReturnStatus WriteFile (const Standard_CString filename)
 Writes the current Interface Model globally to a File, and returns a write status which can be : Done OK, Fail file could not be written, Error no norm is selected Remark : It is a simple, one-file writing, other operations are available (such as splitting ...) which calls SendAll. More...
 
IFSelect_ReturnStatus WriteFile (const Standard_CString filename, const Handle< IFSelect_Selection > &sel)
 Writes a sub-part of the current Interface Model to a File, as defined by a Selection <sel>, recomputes the Graph, and returns a write status which can be : Done OK, Fail file could not be written, Error no norm is selected Remark : It is a simple, one-file writing, other operations are available (such as splitting ...) which calls SendSelected. More...
 
Standard_Integer NbSources (const Handle< IFSelect_Selection > &sel) const
 Returns the count of Input Selections known for a Selection, or 0 if <sel> not in the WorkSession. This count is one for a SelectDeduct / SelectExtract kind, two for SelectControl kind, variable for a SelectCombine (Union/Intersection), zero else. More...
 
Handle< IFSelect_SelectionSource (const Handle< IFSelect_Selection > &sel, const Standard_Integer num=1) const
 Returns the <num>th Input Selection of a Selection (see NbSources). Returns a Null Handle if <sel> is not in the WorkSession or if <num> is out of the range <1-NbSources> To obtain more details, see the method Sources. More...
 
Standard_Boolean IsReversedSelectExtract (const Handle< IFSelect_Selection > &sel) const
 Returns True if <sel> a Reversed SelectExtract, False else. More...
 
Standard_Boolean ToggleSelectExtract (const Handle< IFSelect_Selection > &sel)
 Toggles the Sense (Direct <-> Reversed) of a SelectExtract Returns True if Done, False if <sel> is not a SelectExtract or is not in the WorkSession. More...
 
Standard_Boolean SetInputSelection (const Handle< IFSelect_Selection > &sel, const Handle< IFSelect_Selection > &input)
 Sets an Input Selection (as <input>) to a SelectExtract or a SelectDeduct (as <sel>). Returns True if Done, False if <sel> is neither a SelectExtract nor a SelectDeduct, or not in the WorkSession. More...
 
Standard_Boolean SetControl (const Handle< IFSelect_Selection > &sel, const Handle< IFSelect_Selection > &sc, const Standard_Boolean formain=Standard_True)
 Sets an Input Selection, Main if <formain> is True, Second else (as <sc>) to a SelectControl (as <sel>). Returns True if Done, False if <sel> is not a SelectControl, or <sc> or <sel> is not in the WorkSession. More...
 
Standard_Integer CombineAdd (const Handle< IFSelect_Selection > &selcomb, const Handle< IFSelect_Selection > &seladd, const Standard_Integer atnum=0)
 Adds an input selection to a SelectCombine (Union or Inters.). Returns new count of inputs for this SelectCombine if Done or 0 if <sel> is not kind of SelectCombine, or if <seladd> or <sel> is not in the WorkSession By default, adding is done at the end of the list Else, it is an insertion to rank <atnum> (usefull for Un-ReDo) More...
 
Standard_Boolean CombineRemove (const Handle< IFSelect_Selection > &selcomb, const Handle< IFSelect_Selection > &selrem)
 Removes an input selection from a SelectCombine (Union or Intersection). Returns True if done, False if <selcomb> is not kind of SelectCombine or <selrem> is not source of <selcomb> More...
 
Handle< IFSelect_SelectionNewSelectPointed (const Handle< TColStd_HSequenceOfTransient > &list, const Standard_CString name)
 Creates a new Selection, of type SelectPointed, its content starts with

A name must be given (can be empty) More...

 
Standard_Boolean SetSelectPointed (const Handle< IFSelect_Selection > &sel, const Handle< TColStd_HSequenceOfTransient > &list, const Standard_Integer mode) const
 Changes the content of a Selection of type SelectPointed According <mode> : 0 set

new content (clear former) 1 : adds

actual content -1 : removes

actual content Returns True if done, False if <sel> is not a SelectPointed. More...

 
Handle< IFSelect_SelectionGiveSelection (const Standard_CString selname) const
 Returns a Selection from a Name : More...
 
Handle< TColStd_HSequenceOfTransient > GiveList (const Handle< Standard_Transient > &obj) const
 Determines a list of entities from an object : <obj> already HSequenceOfTransient : returned itself <obj> Selection : its Result of Evaluation is returned <obj> an entity of the Model : a HSequence which contains it else, an empty HSequence <obj> the Model it self : ALL its content (not only the roots) More...
 
Handle< TColStd_HSequenceOfTransient > GiveList (const Standard_CString first, const Standard_CString second="") const
 Computes a List of entities from two alphanums, first and second, as follows : if <first> is a Number or Label of an entity : this entity if <first> is a list of Numbers/Labels : the list of entities if <first> is the name of a Selection in <WS>, and <second> not defined, the standard result of this Selection else, let's consider "first second" : this whole phrase is splitted by blanks, as follows (RECURSIVE CALL) : More...
 
Handle< TColStd_HSequenceOfTransient > GiveListFromList (const Standard_CString selname, const Handle< Standard_Transient > &ent) const
 Computes a List of entities from the model as follows <first> beeing a Selection or a combination of Selections, <ent> beeing an entity or a list of entities (as a HSequenceOfTransient) : the standard result of this selection applied to this list if <ent> is Null, the standard definition of the selection is used (which contains a default input selection) if <selname> is erroneous, a null handle is returned. More...
 
Handle< TColStd_HSequenceOfTransient > GiveListCombined (const Handle< TColStd_HSequenceOfTransient > &l1, const Handle< TColStd_HSequenceOfTransient > &l2, const Standard_Integer mode) const
 Combines two lists and returns the result, according to mode : <mode> < 0 : entities in <l1> AND NOT in <l2> <mode> = 0 : entities in <l1> AND in <l2> <mode> > 0 : entities in <l1> OR in <l2> More...
 
void QueryCheckList (const Interface_CheckIterator &chl)
 Loads data from a check iterator to query status on it. More...
 
Standard_Integer QueryCheckStatus (const Handle< Standard_Transient > &ent) const
 Determines check status for an entity regarding last call to QueryCheckList : -1 : <ent> unknown in the model, ignored 0 : no check at all, immediate or inherited thru Graph 1 : immediate warning (no fail), no inherited check 2 : immediate fail, no inherited check +10 : idem but some inherited warning (no fail) +20 : idem but some inherited fail. More...
 
Standard_Integer QueryParent (const Handle< Standard_Transient > &entdad, const Handle< Standard_Transient > &entson) const
 Determines if <entdad> is parent of <entson> (in the graph), returns : -1 if no; 0 if <entdad> = <entson> 1 if immediate parent, > 1 if parent, gives count of steps. More...
 
void SetParams (const NCollection_Vector< Handle< Standard_Transient >> &params, const NCollection_Vector< Standard_Integer > &uselist)
 Sets a list of Parameters, i.e. TypedValue, to be handled through an Editor The two lists are parallel, if <params> is longer than <uses>, surnumeral parameters are for general use. More...
 
void TraceStatics (const Standard_Integer use, const Standard_Integer mode=0) const
 Traces the Statics attached to a given use number If <use> is given positive (normal), the trace is embedded with a header and a trailer If <use> is negative, just values are printed (this allows to make compositions) Remark : use number 5 commands use -2 to be traced Remark : use numbers 4 and 6 command use -3 to be traced. More...
 
void DumpShare () const
 Dumps contents of the ShareOut (on "cout") More...
 
void ListItems (const Standard_CString label="") const
 Lists the Labels of all Items of the WorkSession If <label> is defined, lists labels which contain it. More...
 
void ListFinalModifiers (const Standard_Boolean formodel) const
 Lists the Modifiers of the session (for each one, displays its Label). Listing is done following Ranks (Modifiers are invoked following their ranks) Model Modifiers if <formodel> is True, File Modifiers else. More...
 
void DumpSelection (const Handle< IFSelect_Selection > &sel) const
 Lists a Selection and its Sources (see SelectionIterator), given its rank in the list. More...
 
void DumpModel (const Standard_Integer level, const Handle< Message_Messenger > &S)
 Lists the content of the Input Model (if there is one) According level : 0 -> gives only count of Entities and Roots 1 -> Lists also Roots; 2 -> Lists all Entities (by TraceType) 3 -> Performs a call to CheckList (Fails) and lists the result 4 -> as 3 but all CheckList (Fails + Warnings) 5,6,7 : as 3 but resp. Count,List,Labels by Fail 8,9,10 : as 4 but resp. Count,List,Labels by message. More...
 
void TraceDumpModel (const Standard_Integer mode)
 Dumps the current Model (as inherited DumpModel), on currently defined Default Trace File (default is standard output) More...
 
void DumpEntity (const Handle< Standard_Transient > &ent, const Standard_Integer level, const Handle< Message_Messenger > &S) const
 Dumps a starting entity according to the current norm. To do this, it calls DumpEntity from WorkLibrary. <level> is to be interpreted for each norm : see specific classes of WorkLibrary for it. Generally, 0 if for very basic (only type ...), greater values give more and more details. More...
 
void PrintEntityStatus (const Handle< Standard_Transient > &ent, const Handle< Message_Messenger > &S)
 Prints main informations about an entity : its number, type, validity (and checks if any), category, shareds and sharings.. mutable because it can recompute checks as necessary. More...
 
void TraceDumpEntity (const Handle< Standard_Transient > &ent, const Standard_Integer level) const
 Dumps an entity from the current Model as inherited DumpEntity on currently defined Default Trace File (<level> interpreted according to the Norm, see WorkLibrary) More...
 
void PrintCheckList (const Interface_CheckIterator &checklist, const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const
 Prints a CheckIterator to the current Trace File, controlled with the current Model complete or fails only, according to <failsonly> <mode> defines the mode of printing 0 : sequential, according entities; else with a CheckCounter 1 : according messages, count of entities 2 : id but with list of entities, designated by their numbers 3 : as 2 but with labels of entities. More...
 
void PrintSignatureList (const Handle< IFSelect_SignatureList > &signlist, const IFSelect_PrintCount mode) const
 Prints a SignatureList to the current Trace File, controlled with the current Model <mode> defines the mode of printing (see SignatureList) More...
 
void EvaluateSelection (const Handle< IFSelect_Selection > &sel) const
 Displays the list of Entities selected by a Selection (i.e. the result of EvalSelection). More...
 
void EvaluateDispatch (const Handle< IFSelect_Dispatch > &disp, const Standard_Integer mode=0) const
 Displays the result of applying a Dispatch on the input Model (also shows Remainder if there is) <mode> = 0 (default), displays nothing else <mode> = 1 : displays also duplicated entities (because of this dispatch) <mode> = 2 : displays the entities of the starting Model which are not taken by this dispatch (forgotten entities) <mode> = 3 : displays both duplicated and forgotten entities Remark : EvaluateComplete displays these data evaluated for for all the dispatches, if there are several. More...
 
void EvaluateComplete (const Standard_Integer mode=0) const
 Displays the effect of applying the ShareOut on the input Model. <mode> = 0 (default) : displays only roots for each packet, <mode> = 1 : displays all entities for each packet, plus duplicated entities <mode> = 2 : same as <mode> = 1, plus displays forgotten entities (which are in no packet at all) More...
 
void ListEntities (const Interface_EntityIterator &iter, const Standard_Integer mode) const
 Internal method which displays an EntityIterator <mode> 0 gives short display (only entity numbers) 1 gives a more complete trace (1 line per Entity) (can be used each time a trace has to be output from a list) 2 gives a form suitable for givelist : (n1,n2,n3...) More...
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const override
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Attributes inherited from IFSelect_WorkSession
Handle< Interface_HGraphthegraph
 
Interface_CheckIterator thecheckrun
 
TColStd_IndexedDataMapOfTransientTransient theitems
 
NCollection_DataMap< TCollection_AsciiString, Handle< Standard_Transient > > thenames
 

Detailed Description

This WorkSession completes the basic one, by adding :

Constructor & Destructor Documentation

XSControl_WorkSession::XSControl_WorkSession ( )
XSControl_WorkSession::~XSControl_WorkSession ( )
inline

Member Function Documentation

void XSControl_WorkSession::ClearContext ( )

Clears the whole current Context (nullifies it)

virtual void XSControl_WorkSession::ClearData ( const Standard_Integer  theMode)
overridevirtual

In addition to basic ClearData, clears Transfer and Management for interactive use, for mode = 0,1,2 and over 4 Plus : mode = 5 to clear Transfers (both ways) only mode = 6 to clear enforced results mode = 7 to clear transfers, results.

Reimplemented from IFSelect_WorkSession.

const NCollection_DataMap<TCollection_AsciiString, Handle< Standard_Transient > >& XSControl_WorkSession::Context ( ) const
inline

Returns the current Context List, Null if not defined The Context is given to the TransientProcess for TransferRead.

void XSControl_WorkSession::InitTransferReader ( const Standard_Integer  theMode)

Sets a Transfer Reader, by internal ways, according mode : 0 recreates it clear, 1 clears it (does not recreate) 2 aligns Roots of TransientProcess from final Results 3 aligns final Results from Roots of TransientProcess 4 begins a new transfer (by BeginTransfer) 5 recreates TransferReader then begins a new transfer.

Handle< Transfer_TransientProcess > XSControl_WorkSession::MapReader ( ) const

Returns the TransientProcess(internal data for TransferReader)

Handle< Interface_InterfaceModel > XSControl_WorkSession::NewModel ( )

produces and returns a new Model well conditionned It is produced by the Norm Controller It can be Null (if this function is not implemented)

const Handle< XSControl_Controller >& XSControl_WorkSession::NormAdaptor ( ) const
inline

Returns the norm controller itself.

Standard_Boolean XSControl_WorkSession::PrintTransferStatus ( const Standard_Integer  theNum,
const Standard_Boolean  theWri,
const Handle< Message_Messenger > &  theS 
) const

Prints the transfer status of a transferred item, as beeing the Mapped n0 <num>, from MapWriter if <wri> is True, or from MapReader if <wri> is False Returns True when done, False else (i.e. num out of range)

Handle< Standard_Transient > XSControl_WorkSession::Result ( const Handle< Standard_Transient > &  theEnt,
const Standard_Integer  theMode 
) const

Returns the result attached to a starting entity If <mode> = 0, returns Final Result If <mode> = 1, considers Last Result If <mode> = 2, considers Final, else if absent, Last returns it as Transient, if result is not transient returns the Binder <mode> = 10,11,12 idem but returns the Binder itself (if it is not, e.g. Shape, returns the Binder) <mode> = 20, returns the ResultFromModel.

Standard_CString XSControl_WorkSession::SelectedNorm ( const Standard_Boolean  theRsc = Standard_False) const

Returns the name of the last Selected Norm. If none is defined, returns an empty string By default, returns the complete name of the norm If <rsc> is True, returns the short name used for resource.

Standard_Boolean XSControl_WorkSession::SelectNorm ( const Standard_CString  theNormName)

Selects a Norm defined by its name. A Norm is described and handled by a Controller Returns True if done, False if <normname> is unknown.

The current Profile for this Norm is taken.

void XSControl_WorkSession::SetAllContext ( const NCollection_DataMap< TCollection_AsciiString, Handle< Standard_Transient >> &  theContext)

Sets the current Context List, as a whole Sets it to the TransferReader.

void XSControl_WorkSession::SetController ( const Handle< XSControl_Controller > &  theCtl)

Selects a Norm defined by its Controller itself.

Standard_Boolean XSControl_WorkSession::SetMapReader ( const Handle< Transfer_TransientProcess > &  theTP)

Changes the Map Reader, i.e. considers that the new one defines the relevant read results (forgets the former ones) Returns True when done, False in case of bad definition, i.e. if Model from TP differs from that of Session.

Standard_Boolean XSControl_WorkSession::SetMapWriter ( const Handle< Transfer_FinderProcess > &  theFP)
inline

Changes the Map Reader, i.e. considers that the new one defines the relevant read results (forgets the former ones) Returns True when done, False if <FP> is Null.

void XSControl_WorkSession::SetTransferReader ( const Handle< XSControl_TransferReader > &  theTR)

Sets a Transfer Reader, which manages transfers on reading.

void XSControl_WorkSession::SetVars ( const Handle< XSControl_Vars > &  theVars)
inline
const Handle< XSControl_TransferReader >& XSControl_WorkSession::TransferReader ( ) const
inline

Returns the Transfer Reader, Null if not set.

Standard_Integer XSControl_WorkSession::TransferReadOne ( const Handle< Standard_Transient > &  theEnts)

Commands the transfer of, either one entity, or a list I.E. calls the TransferReader after having analysed <ents> It is cumulated from the last BeginTransfer <ents> is processed by GiveList, hence :

  • <ents> a Selection : its SelectionResult
  • <ents> a HSequenceOfTransient : this list
  • <ents> the Model : in this specific case, all the roots, with no cumulation of former transfers (TransferReadRoots)
Standard_Integer XSControl_WorkSession::TransferReadRoots ( )

Commands the transfer of all the root entities of the model i.e. calls TransferRoot from the TransferReader with the Graph No cumulation with former calls to TransferReadOne.

Interface_CheckIterator XSControl_WorkSession::TransferWriteCheckList ( ) const

Returns the check-list of last transfer (write) It is recorded in the FinderProcess, but it must be bound with resulting entities (in the resulting file model) rather than with original objects (in fact, their mappers)

const Handle< XSControl_TransferWriter >& XSControl_WorkSession::TransferWriter ( ) const
inline

Returns the Transfer Reader, Null if not set.

IFSelect_ReturnStatus XSControl_WorkSession::TransferWriteShape ( const TopoDS_Shape theShape,
const Standard_Boolean  theCompGraph = Standard_True 
)

Transfers a Shape from CasCade to a model of current norm, according to the last call to SetModeWriteShape Returns status :Done if OK, Fail if error during transfer, Error if transfer badly initialised.

const Handle< XSControl_Vars >& XSControl_WorkSession::Vars ( ) const
inline

The documentation for this class was generated from the following file: