Open CASCADE Technology  7.1.0.beta
Public Member Functions | Protected Member Functions

ShapeUpgrade_ShapeDivideContinuity Class Reference

API Tool for converting shapes with C0 geometry into C1 ones. More...

#include <ShapeUpgrade_ShapeDivideContinuity.hxx>

Inheritance diagram for ShapeUpgrade_ShapeDivideContinuity:
Inheritance graph
[legend]

Public Member Functions

 ShapeUpgrade_ShapeDivideContinuity ()
 
 ShapeUpgrade_ShapeDivideContinuity (const TopoDS_Shape &S)
 Initialize by a Shape. More...
 
void SetTolerance (const Standard_Real Tol)
 Sets tolerance. More...
 
void SetTolerance2d (const Standard_Real Tol)
 Sets tolerance. More...
 
void SetBoundaryCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
 Defines a criterion of continuity for the boundary (all the Wires) More...
 
void SetPCurveCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
 Defines a criterion of continuity for the boundary (all the pcurves of Wires) More...
 
void SetSurfaceCriterion (const GeomAbs_Shape Criterion=GeomAbs_C1)
 Defines a criterion of continuity for the boundary (all the Wires) More...
 
- Public Member Functions inherited from ShapeUpgrade_ShapeDivide
 ShapeUpgrade_ShapeDivide ()
 
 ShapeUpgrade_ShapeDivide (const TopoDS_Shape &S)
 Initialize by a Shape. More...
 
void Init (const TopoDS_Shape &S)
 Initialize by a Shape. More...
 
virtual ~ShapeUpgrade_ShapeDivide ()
 
void SetPrecision (const Standard_Real Prec)
 Defines the spatial precision used for splitting. More...
 
void SetMaxTolerance (const Standard_Real maxtol)
 Sets maximal allowed tolerance. More...
 
void SetMinTolerance (const Standard_Real mintol)
 Sets minimal allowed tolerance. More...
 
void SetSurfaceSegmentMode (const Standard_Boolean Segment)
 Purpose sets mode for trimming (segment) surface by wire UV bounds. More...
 
virtual Standard_Boolean Perform (const Standard_Boolean newContext=Standard_True)
 Performs splitting and computes the resulting shape If newContext is True (default), the internal context will be cleared at start, else previous substitutions will be acting. More...
 
TopoDS_Shape Result () const
 Gives the resulting Shape, or Null shape if not done. More...
 
Handle< ShapeBuild_ReShapeGetContext () const
 Returns context with all the modifications made during last call(s) to Perform() recorded. More...
 
void SetContext (const Handle< ShapeBuild_ReShape > &context)
 Sets context with recorded modifications to be applied during next call(s) to Perform(shape,Standard_False) More...
 
virtual void SetMsgRegistrator (const Handle< ShapeExtend_BasicMsgRegistrator > &msgreg)
 Sets message registrator. More...
 
Handle< ShapeExtend_BasicMsgRegistratorMsgRegistrator () const
 Returns message registrator. More...
 
void SendMsg (const TopoDS_Shape &shape, const Message_Msg &message, const Message_Gravity gravity=Message_Info) const
 Sends a message to be attached to the shape. Calls corresponding message of message registrator. More...
 
Standard_Boolean Status (const ShapeExtend_Status status) const
 Queries the status of last call to Perform OK : no splitting was done (or no call to Perform) DONE1: some edges were splitted DONE2: surface was splitted FAIL1: some errors occured. More...
 
void SetSplitFaceTool (const Handle< ShapeUpgrade_FaceDivide > &splitFaceTool)
 Sets the tool for splitting faces. More...
 
void SetEdgeMode (const Standard_Integer aEdgeMode)
 Sets mode for splitting 3d curves from edges. 0 - only curve 3d from free edges. 1 - only curve 3d from shared edges. 2 - all curve 3d. More...
 

Protected Member Functions

virtual Handle< ShapeUpgrade_FaceDivideGetSplitFaceTool () const override
 Returns the tool for dividing faces. More...
 
- Protected Member Functions inherited from ShapeUpgrade_ShapeDivide
virtual Message_Msg GetFaceMsg () const
 
virtual Message_Msg GetWireMsg () const
 
virtual Message_Msg GetEdgeMsg () const
 Returns a message decsribing modification of a shape. More...
 

Additional Inherited Members

- Protected Attributes inherited from ShapeUpgrade_ShapeDivide
Handle< ShapeBuild_ReShapemyContext
 
Handle< ShapeExtend_BasicMsgRegistratormyMsgReg
 
TopoDS_Shape myShape
 
TopoDS_Shape myResult
 
Standard_Real myPrecision
 
Standard_Real myMinTol
 
Standard_Real myMaxTol
 
Standard_Boolean mySegmentMode
 
Standard_Integer myStatus
 
Standard_Integer myEdgeMode
 

Detailed Description

API Tool for converting shapes with C0 geometry into C1 ones.

Constructor & Destructor Documentation

ShapeUpgrade_ShapeDivideContinuity::ShapeUpgrade_ShapeDivideContinuity ( )
ShapeUpgrade_ShapeDivideContinuity::ShapeUpgrade_ShapeDivideContinuity ( const TopoDS_Shape S)

Initialize by a Shape.

Member Function Documentation

virtual Handle< ShapeUpgrade_FaceDivide > ShapeUpgrade_ShapeDivideContinuity::GetSplitFaceTool ( ) const
overrideprotectedvirtual

Returns the tool for dividing faces.

Reimplemented from ShapeUpgrade_ShapeDivide.

void ShapeUpgrade_ShapeDivideContinuity::SetBoundaryCriterion ( const GeomAbs_Shape  Criterion = GeomAbs_C1)

Defines a criterion of continuity for the boundary (all the Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

void ShapeUpgrade_ShapeDivideContinuity::SetPCurveCriterion ( const GeomAbs_Shape  Criterion = GeomAbs_C1)

Defines a criterion of continuity for the boundary (all the pcurves of Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

void ShapeUpgrade_ShapeDivideContinuity::SetSurfaceCriterion ( const GeomAbs_Shape  Criterion = GeomAbs_C1)

Defines a criterion of continuity for the boundary (all the Wires)

The possible values are C0, G1, C1, G2, C2, C3, CN The default is C1 to respect the Cas.Cade Shape Validity. G1 and G2 are not authorized.

void ShapeUpgrade_ShapeDivideContinuity::SetTolerance ( const Standard_Real  Tol)

Sets tolerance.

void ShapeUpgrade_ShapeDivideContinuity::SetTolerance2d ( const Standard_Real  Tol)

Sets tolerance.


The documentation for this class was generated from the following file: