Open CASCADE Technology  7.1.0.beta
Public Member Functions

Geom2dGcc_Circ2d2TanRad Class Reference

This class implements the algorithms used to create 2d circles tangent to one curve and a point/line/circle/curv and with a given radius. For each construction methods arguments are: More...

#include <Geom2dGcc_Circ2d2TanRad.hxx>

Public Member Functions

 Geom2dGcc_Circ2d2TanRad (const Geom2dGcc_QualifiedCurve &Qualified1, const Geom2dGcc_QualifiedCurve &Qualified2, const Standard_Real Radius, const Standard_Real Tolerance)
 
 Geom2dGcc_Circ2d2TanRad (const Geom2dGcc_QualifiedCurve &Qualified1, const Handle< Geom2d_Point > &Point, const Standard_Real Radius, const Standard_Real Tolerance)
 
 Geom2dGcc_Circ2d2TanRad (const Handle< Geom2d_Point > &Point1, const Handle< Geom2d_Point > &Point2, const Standard_Real Radius, const Standard_Real Tolerance)
 These constructors create one or more 2D circles of radius Radius either. More...
 
void Results (const GccAna_Circ2d2TanRad &Circ)
 
void Results (const Geom2dGcc_Circ2d2TanRadGeo &Circ)
 
Standard_Boolean IsDone () const
 This method returns True if the algorithm succeeded. Note: IsDone protects against a failure arising from a more internal intersection algorithm, which has reached its numeric limits. More...
 
Standard_Integer NbSolutions () const
 This method returns the number of solutions. NotDone is raised if the algorithm failed. Exceptions StdFail_NotDone if the construction fails. More...
 
gp_Circ2d ThisSolution (const Standard_Integer Index) const
 Returns the solution number Index and raises OutOfRange exception if Index is greater than the number of solutions. Be carefull: the Index is only a way to get all the solutions, but is not associated to theses outside the context of the algorithm-object. Warning This indexing simply provides a means of consulting the solutions. The index values are not associated with these solutions outside the context of the algorithm object. Exceptions Standard_OutOfRange if Index is less than zero or greater than the number of solutions computed by this algorithm. StdFail_NotDone if the construction fails. More...
 
void WhichQualifier (const Standard_Integer Index, GccEnt_Position &Qualif1, GccEnt_Position &Qualif2) const
 Returns the qualifiers Qualif1 and Qualif2 of the tangency arguments for the solution of index Index computed by this algorithm. The returned qualifiers are: More...
 
void Tangency1 (const Standard_Integer Index, Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
 Returns informations about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed. More...
 
void Tangency2 (const Standard_Integer Index, Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
 Returns informations about the tangency point between the result number Index and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed. More...
 
Standard_Boolean IsTheSame1 (const Standard_Integer Index) const
 Returns true if the solution of index Index and, respectively, the first or second argument of this algorithm are the same (i.e. there are 2 identical circles). If Rarg is the radius of the first or second argument, Rsol is the radius of the solution and dist is the distance between the two centers, we consider the two circles to be identical if |Rarg - Rsol| and dist are less than or equal to the tolerance criterion given at the time of construction of this algorithm. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed. More...
 
Standard_Boolean IsTheSame2 (const Standard_Integer Index) const
 Returns true if the solution of index Index and, respectively, the first or second argument of this algorithm are the same (i.e. there are 2 identical circles). If Rarg is the radius of the first or second argument, Rsol is the radius of the solution and dist is the distance between the two centers, we consider the two circles to be identical if |Rarg - Rsol| and dist are less than or equal to the tolerance criterion given at the time of construction of this algorithm. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed. More...
 

Detailed Description

This class implements the algorithms used to create 2d circles tangent to one curve and a point/line/circle/curv and with a given radius. For each construction methods arguments are:

Constructor & Destructor Documentation

Geom2dGcc_Circ2d2TanRad::Geom2dGcc_Circ2d2TanRad ( const Geom2dGcc_QualifiedCurve Qualified1,
const Geom2dGcc_QualifiedCurve Qualified2,
const Standard_Real  Radius,
const Standard_Real  Tolerance 
)
Geom2dGcc_Circ2d2TanRad::Geom2dGcc_Circ2d2TanRad ( const Geom2dGcc_QualifiedCurve Qualified1,
const Handle< Geom2d_Point > &  Point,
const Standard_Real  Radius,
const Standard_Real  Tolerance 
)
Geom2dGcc_Circ2d2TanRad::Geom2dGcc_Circ2d2TanRad ( const Handle< Geom2d_Point > &  Point1,
const Handle< Geom2d_Point > &  Point2,
const Standard_Real  Radius,
const Standard_Real  Tolerance 
)

These constructors create one or more 2D circles of radius Radius either.

  • tangential to the 2 curves Qualified1 and Qualified2, or
  • tangential to the curve Qualified1 and passing through the point Point, or
  • passing through two points Point1 and Point2. Tolerance is a tolerance criterion used by the algorithm to find a solution when, mathematically, the problem posed does not have a solution, but where there is numeric uncertainty attached to the arguments. For example, take two circles C1 and C2, such that C2 is inside C1, and almost tangential to C1. There is, in fact, no point of intersection between C1 and C2. You now want to find a circle of radius R (smaller than the radius of C2), which is tangential to C1 and C2, and inside these two circles: a pure mathematical resolution will not find a solution. This is where the tolerance criterion is used: the algorithm considers that C1 and C2 are tangential if the shortest distance between these two circles is less than or equal to Tolerance. Thus, a solution is found by the algorithm. Exceptions GccEnt_BadQualifier if a qualifier is inconsistent with the argument it qualifies (for example, enclosing for a line). Standard_NegativeValue if Radius is negative.

Member Function Documentation

Standard_Boolean Geom2dGcc_Circ2d2TanRad::IsDone ( ) const

This method returns True if the algorithm succeeded. Note: IsDone protects against a failure arising from a more internal intersection algorithm, which has reached its numeric limits.

Standard_Boolean Geom2dGcc_Circ2d2TanRad::IsTheSame1 ( const Standard_Integer  Index) const

Returns true if the solution of index Index and, respectively, the first or second argument of this algorithm are the same (i.e. there are 2 identical circles). If Rarg is the radius of the first or second argument, Rsol is the radius of the solution and dist is the distance between the two centers, we consider the two circles to be identical if |Rarg - Rsol| and dist are less than or equal to the tolerance criterion given at the time of construction of this algorithm. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed.

Standard_Boolean Geom2dGcc_Circ2d2TanRad::IsTheSame2 ( const Standard_Integer  Index) const

Returns true if the solution of index Index and, respectively, the first or second argument of this algorithm are the same (i.e. there are 2 identical circles). If Rarg is the radius of the first or second argument, Rsol is the radius of the solution and dist is the distance between the two centers, we consider the two circles to be identical if |Rarg - Rsol| and dist are less than or equal to the tolerance criterion given at the time of construction of this algorithm. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed.

Standard_Integer Geom2dGcc_Circ2d2TanRad::NbSolutions ( ) const

This method returns the number of solutions. NotDone is raised if the algorithm failed. Exceptions StdFail_NotDone if the construction fails.

void Geom2dGcc_Circ2d2TanRad::Results ( const GccAna_Circ2d2TanRad Circ)
void Geom2dGcc_Circ2d2TanRad::Results ( const Geom2dGcc_Circ2d2TanRadGeo Circ)
void Geom2dGcc_Circ2d2TanRad::Tangency1 ( const Standard_Integer  Index,
Standard_Real ParSol,
Standard_Real ParArg,
gp_Pnt2d PntSol 
) const

Returns informations about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed.

void Geom2dGcc_Circ2d2TanRad::Tangency2 ( const Standard_Integer  Index,
Standard_Real ParSol,
Standard_Real ParArg,
gp_Pnt2d PntSol 
) const

Returns informations about the tangency point between the result number Index and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. OutOfRange is raised if Index is greater than the number of solutions. notDone is raised if the construction algorithm did not succeed.

gp_Circ2d Geom2dGcc_Circ2d2TanRad::ThisSolution ( const Standard_Integer  Index) const

Returns the solution number Index and raises OutOfRange exception if Index is greater than the number of solutions. Be carefull: the Index is only a way to get all the solutions, but is not associated to theses outside the context of the algorithm-object. Warning This indexing simply provides a means of consulting the solutions. The index values are not associated with these solutions outside the context of the algorithm object. Exceptions Standard_OutOfRange if Index is less than zero or greater than the number of solutions computed by this algorithm. StdFail_NotDone if the construction fails.

void Geom2dGcc_Circ2d2TanRad::WhichQualifier ( const Standard_Integer  Index,
GccEnt_Position Qualif1,
GccEnt_Position Qualif2 
) const

Returns the qualifiers Qualif1 and Qualif2 of the tangency arguments for the solution of index Index computed by this algorithm. The returned qualifiers are:

  • those specified at the start of construction when the solutions are defined as enclosed, enclosing or outside with respect to the arguments, or
  • those computed during construction (i.e. enclosed, enclosing or outside) when the solutions are defined as unqualified with respect to the arguments, or
  • GccEnt_noqualifier if the tangency argument is a point, or
  • GccEnt_unqualified in certain limit cases where it is impossible to qualify the solution as enclosed, enclosing or outside. Exceptions Standard_OutOfRange if Index is less than zero or greater than the number of solutions computed by this algorithm. StdFail_NotDone if the construction fails.

The documentation for this class was generated from the following file: