Open CASCADE Technology  7.1.0.beta
Public Member Functions

Convert_CompBezierCurvesToBSplineCurve Class Reference

An algorithm to convert a sequence of adjacent non-rational Bezier curves into a BSpline curve. A CompBezierCurvesToBSplineCurve object provides a framework for: More...

#include <Convert_CompBezierCurvesToBSplineCurve.hxx>

Public Member Functions

 Convert_CompBezierCurvesToBSplineCurve (const Standard_Real AngularTolerance=1.0e-4)
 Constructs a framework for converting a sequence of adjacent non-rational Bezier curves into a BSpline curve. Knots will be created on the computed BSpline curve at each junction point of two consecutive Bezier curves. The degree of continuity of the BSpline curve will be increased at the junction point of two consecutive Bezier curves if their tangent vectors at this point are parallel. AngularTolerance (given in radians, and defaulted to 1.0 e-4) will be used to check the parallelism of the two tangent vectors. Use the following functions: More...
 
void AddCurve (const TColgp_Array1OfPnt &Poles)
 Adds the Bezier curve defined by the table of poles Poles, to the sequence (still contained in this framework) of adjacent Bezier curves to be converted into a BSpline curve. Only polynomial (i.e. non-rational) Bezier curves are converted using this framework. If this is not the first call to the function (i.e. if this framework still contains data in its Bezier curve sequence), the degree of continuity of the BSpline curve will be increased at the time of computation at the first point of the added Bezier curve (i.e. the first point of the Poles table). This will be the case if the tangent vector of the curve at this point is parallel to the tangent vector at the end point of the preceding Bezier curve in the Bezier curve sequence still contained in this framework. An angular tolerance given at the time of construction of this framework will be used to check the parallelism of the two tangent vectors. This checking procedure and all related computations will be performed by the Perform function. When the adjacent Bezier curve sequence is complete, use the following functions: More...
 
void Perform ()
 Computes all the data needed to build a BSpline curve equivalent to the adjacent Bezier curve sequence still contained in this framework. A knot is inserted on the computed BSpline curve at the junction point of two consecutive Bezier curves. The degree of continuity of the BSpline curve will be increased at the junction point of two consecutive Bezier curves if their tangent vectors at this point are parallel. An angular tolerance given at the time of construction of this framework is used to check the parallelism of the two tangent vectors. Use the available consultation functions to access the computed data. This data may then be used to construct the BSpline curve. Warning Make sure that the curves in the Bezier curve sequence contained in this framework are adjacent. An error may occur at the time of computation if this condition is not satisfied. Particular care must be taken with respect to the above as this condition is not checked, either when defining the Bezier curve sequence or at the time of computation. More...
 
Standard_Integer Degree () const
 Returns the degree of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur. More...
 
Standard_Integer NbPoles () const
 Returns the number of poles of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur. More...
 
void Poles (TColgp_Array1OfPnt &Poles) const
 Loads the Poles table with the poles of the BSpline curve whose data is computed in this framework. Warning. More...
 
Standard_Integer NbKnots () const
 Returns the number of knots of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur. More...
 
void KnotsAndMults (TColStd_Array1OfReal &Knots, TColStd_Array1OfInteger &Mults) const
 

Detailed Description

An algorithm to convert a sequence of adjacent non-rational Bezier curves into a BSpline curve. A CompBezierCurvesToBSplineCurve object provides a framework for:

Constructor & Destructor Documentation

Convert_CompBezierCurvesToBSplineCurve::Convert_CompBezierCurvesToBSplineCurve ( const Standard_Real  AngularTolerance = 1.0e-4)

Constructs a framework for converting a sequence of adjacent non-rational Bezier curves into a BSpline curve. Knots will be created on the computed BSpline curve at each junction point of two consecutive Bezier curves. The degree of continuity of the BSpline curve will be increased at the junction point of two consecutive Bezier curves if their tangent vectors at this point are parallel. AngularTolerance (given in radians, and defaulted to 1.0 e-4) will be used to check the parallelism of the two tangent vectors. Use the following functions:

  • AddCurve to define in sequence the adjacent Bezier curves to be converted,
  • Perform to compute the data needed to build the BSpline curve,
  • and the available consultation functions to access the computed data. This data may be used to construct the BSpline curve.

Member Function Documentation

void Convert_CompBezierCurvesToBSplineCurve::AddCurve ( const TColgp_Array1OfPnt Poles)

Adds the Bezier curve defined by the table of poles Poles, to the sequence (still contained in this framework) of adjacent Bezier curves to be converted into a BSpline curve. Only polynomial (i.e. non-rational) Bezier curves are converted using this framework. If this is not the first call to the function (i.e. if this framework still contains data in its Bezier curve sequence), the degree of continuity of the BSpline curve will be increased at the time of computation at the first point of the added Bezier curve (i.e. the first point of the Poles table). This will be the case if the tangent vector of the curve at this point is parallel to the tangent vector at the end point of the preceding Bezier curve in the Bezier curve sequence still contained in this framework. An angular tolerance given at the time of construction of this framework will be used to check the parallelism of the two tangent vectors. This checking procedure and all related computations will be performed by the Perform function. When the adjacent Bezier curve sequence is complete, use the following functions:

  • Perform to compute the data needed to build the BSpline curve,
  • and the available consultation functions to access the computed data. This data may be used to construct the BSpline curve. Warning The Bezier curve sequence treated by this framework is automatically initialized with the first Bezier curve when the function is first called. During subsequent use of this function, ensure that the first point of the added Bezier curve (i.e. the first point of the Poles table) is coincident with the last point of the Bezier curve sequence (i.e. the last point of the preceding Bezier curve in the sequence) still contained in this framework. An error may occur at the time of computation if this condition is not satisfied. Particular care must be taken with respect to the above, as this condition is not checked either when defining the Bezier curve sequence or at the time of computation.
Standard_Integer Convert_CompBezierCurvesToBSplineCurve::Degree ( ) const

Returns the degree of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur.

void Convert_CompBezierCurvesToBSplineCurve::KnotsAndMults ( TColStd_Array1OfReal Knots,
TColStd_Array1OfInteger Mults 
) const
  • loads the Knots table with the knots,

and loads the Mults table with the corresponding multiplicities of the BSpline curve whose data is computed in this framework. Warning

  • Do not use this function before the computation is performed (Perform function).
  • The length of the Knots and Mults arrays must be equal to the number of knots in the BSpline curve whose data is computed in this framework. Particular care must be taken with respect to the above as these conditions are not checked, and an error may occur.
Standard_Integer Convert_CompBezierCurvesToBSplineCurve::NbKnots ( ) const

Returns the number of knots of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur.

Standard_Integer Convert_CompBezierCurvesToBSplineCurve::NbPoles ( ) const

Returns the number of poles of the BSpline curve whose data is computed in this framework. Warning Take particular care not to use this function before the computation is performed (Perform function), as this condition is not checked and an error may therefore occur.

void Convert_CompBezierCurvesToBSplineCurve::Perform ( )

Computes all the data needed to build a BSpline curve equivalent to the adjacent Bezier curve sequence still contained in this framework. A knot is inserted on the computed BSpline curve at the junction point of two consecutive Bezier curves. The degree of continuity of the BSpline curve will be increased at the junction point of two consecutive Bezier curves if their tangent vectors at this point are parallel. An angular tolerance given at the time of construction of this framework is used to check the parallelism of the two tangent vectors. Use the available consultation functions to access the computed data. This data may then be used to construct the BSpline curve. Warning Make sure that the curves in the Bezier curve sequence contained in this framework are adjacent. An error may occur at the time of computation if this condition is not satisfied. Particular care must be taken with respect to the above as this condition is not checked, either when defining the Bezier curve sequence or at the time of computation.

void Convert_CompBezierCurvesToBSplineCurve::Poles ( TColgp_Array1OfPnt Poles) const

Loads the Poles table with the poles of the BSpline curve whose data is computed in this framework. Warning.

  • Do not use this function before the computation is performed (Perform function).
  • The length of the Poles array must be equal to the number of poles of the BSpline curve whose data is computed in this framework. Particular care must be taken with respect to the above, as these conditions are not checked, and an error may occur.

The documentation for this class was generated from the following file: