Open CASCADE Technology  7.1.0.beta
Public Member Functions | Protected Member Functions | Protected Attributes

BRepAlgoAPI_Check Class Reference

The class Check provides a diagnostic tool for checking single shape or couple of shapes. Single shape is checking on topological validity, small edges and self-interference. For couple of shapes added check on validity for boolean operation of given type. More...

#include <BRepAlgoAPI_Check.hxx>

Inheritance diagram for BRepAlgoAPI_Check:
Inheritance graph
[legend]

Public Member Functions

 BRepAlgoAPI_Check ()
 Empty constructor. More...
 
virtual ~BRepAlgoAPI_Check ()
 
 BRepAlgoAPI_Check (const TopoDS_Shape &theS, const Standard_Boolean bTestSE=Standard_True, const Standard_Boolean bTestSI=Standard_True)
 Constructor for checking single shape. It calls methods Init(theS, TopoDS_Shape(), BOPAlgo_UNKNOWN, bTestSE, bTestSI) and Perform(). Params: theS - the shape that should be checked; bTestSE - flag that specifies whether check on small edges should be performed; by default it is set to TRUE; bTestSI - flag that specifies whether check on self-interference should be performed; by default it is set to TRUE;. More...
 
 BRepAlgoAPI_Check (const TopoDS_Shape &theS1, const TopoDS_Shape &theS2, const BOPAlgo_Operation theOp=BOPAlgo_UNKNOWN, const Standard_Boolean bTestSE=Standard_True, const Standard_Boolean bTestSI=Standard_True)
 Constructor for couple of shapes. It calls methods Init(theS1, theS2, theOp, bTestSE, bTestSI) and Perform(). Params: theS1, theS2 - the initial shapes. theOp - the type of Boolean Operation; if it is not defined (set to UNKNOWN) for each shape performed check as for single shape. bTestSE - flag that specifies whether check on small edges should be performed; by default it is set to TRUE; bTestSI - flag that specifies whether check on self-interference should be performed; by default it is set to TRUE;. More...
 
void SetData (const TopoDS_Shape &theS, const Standard_Boolean bTestSE=Standard_True, const Standard_Boolean bTestSI=Standard_True)
 Sets data for check by Init method. The method provides alternative way for checking single shape. More...
 
void SetData (const TopoDS_Shape &theS1, const TopoDS_Shape &theS2, const BOPAlgo_Operation theOp=BOPAlgo_UNKNOWN, const Standard_Boolean bTestSE=Standard_True, const Standard_Boolean bTestSI=Standard_True)
 Sets data for check by Init method. The method provides alternative way for checking couple of shapes. More...
 
void Perform ()
 Performs the check. More...
 
Standard_Boolean IsValid ()
 Shows whether shape(s) valid or not. More...
 
const BOPAlgo_ListOfCheckResultResult ()
 Returns faulty shapes. More...
 
void SetFuzzyValue (const Standard_Real theFuzz)
 Sets the additional tolerance. More...
 
Standard_Real FuzzyValue () const
 Returns the additional tolerance. More...
 
- Public Member Functions inherited from BRepAlgoAPI_Algo
Standard_Integer ErrorStatus () const
 Returns error status of the algorithm ==0 - no errors occured !=0 - is in the event of various error conditions. More...
 
Standard_Integer WarningStatus () const
 Returns warning status of the algorithm ==0 - no warning occured !=0 - is in the event of various warning conditions. More...
 
const BOPCol_BaseAllocatorAllocator () const
 
void SetRunParallel (const Standard_Boolean theFlag)
 Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...
 
Standard_Boolean RunParallel () const
 Returns the flag of parallel processing. More...
 
void SetProgressIndicator (const Handle< Message_ProgressIndicator > &theObj)
 Set the Progress Indicator object. More...
 
virtual const TopoDS_ShapeShape () override
 Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
 
- Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void Build ()
 This is called by Shape(). It does nothing but may be redefined. More...
 
 operator TopoDS_Shape ()
 
virtual const TopTools_ListOfShapeGenerated (const TopoDS_Shape &S)
 Returns the list of shapes generated from the shape <S>. More...
 
virtual const TopTools_ListOfShapeModified (const TopoDS_Shape &S)
 Returns the list of shapes modified from the shape <S>. More...
 
virtual Standard_Boolean IsDeleted (const TopoDS_Shape &S)
 Returns true if the shape S has been deleted. More...
 
- Public Member Functions inherited from BRepBuilderAPI_Command
virtual ~BRepBuilderAPI_Command ()
 
virtual Standard_Boolean IsDone () const
 
void Check () const
 Raises NotDone if done is false. More...
 

Protected Member Functions

void Init (const TopoDS_Shape &theS1, const TopoDS_Shape &theS2, const BOPAlgo_Operation theOp, const Standard_Boolean bTestSE, const Standard_Boolean bTestSI)
 Initialyzes data. More...
 
- Protected Member Functions inherited from BRepAlgoAPI_Algo
 BRepAlgoAPI_Algo ()
 Empty constructor. More...
 
virtual ~BRepAlgoAPI_Algo ()
 
 BRepAlgoAPI_Algo (const BOPCol_BaseAllocator &theAllocator)
 Empty constructor. More...
 
void UserBreak () const
 Breaks the execution if the break signal is indicated by myProgressIndicator. More...
 
virtual void Clear ()
 
- Protected Member Functions inherited from BRepBuilderAPI_MakeShape
 BRepBuilderAPI_MakeShape ()
 
- Protected Member Functions inherited from BRepBuilderAPI_Command
 BRepBuilderAPI_Command ()
 Set done to False. More...
 
void Done ()
 Set done to true. More...
 
void NotDone ()
 Set done to false. More...
 

Protected Attributes

TopoDS_Shape myS1
 
TopoDS_Shape myS2
 
BOPAlgo_PArgumentAnalyzer myAnalyzer
 
BOPAlgo_ListOfCheckResult myResult
 
Standard_Real myFuzzyValue
 
- Protected Attributes inherited from BRepAlgoAPI_Algo
BOPCol_BaseAllocator myAllocator
 
Standard_Integer myErrorStatus
 
Standard_Integer myWarningStatus
 
Standard_Boolean myRunParallel
 
Handle< Message_ProgressIndicatormyProgressIndicator
 
- Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape myShape
 
TopTools_ListOfShape myGenerated
 

Detailed Description

The class Check provides a diagnostic tool for checking single shape or couple of shapes. Single shape is checking on topological validity, small edges and self-interference. For couple of shapes added check on validity for boolean operation of given type.

The class provides two ways of checking shape(-s)

  1. Constructors BRepAlgoAPI_Check aCh(theS); Standard_Boolean bV=aCh.IsValid();
  2. Methods SetData and Perform BRepAlgoAPI_Check aCh; aCh.SetData(theS1, theS2, BOPAlgo_FUSE, Standard_False); aCh.Perform(); Standard_Boolean bV=aCh.IsValid();

Constructor & Destructor Documentation

BRepAlgoAPI_Check::BRepAlgoAPI_Check ( )

Empty constructor.

virtual BRepAlgoAPI_Check::~BRepAlgoAPI_Check ( )
virtual
BRepAlgoAPI_Check::BRepAlgoAPI_Check ( const TopoDS_Shape theS,
const Standard_Boolean  bTestSE = Standard_True,
const Standard_Boolean  bTestSI = Standard_True 
)

Constructor for checking single shape. It calls methods Init(theS, TopoDS_Shape(), BOPAlgo_UNKNOWN, bTestSE, bTestSI) and Perform(). Params: theS - the shape that should be checked; bTestSE - flag that specifies whether check on small edges should be performed; by default it is set to TRUE; bTestSI - flag that specifies whether check on self-interference should be performed; by default it is set to TRUE;.

BRepAlgoAPI_Check::BRepAlgoAPI_Check ( const TopoDS_Shape theS1,
const TopoDS_Shape theS2,
const BOPAlgo_Operation  theOp = BOPAlgo_UNKNOWN,
const Standard_Boolean  bTestSE = Standard_True,
const Standard_Boolean  bTestSI = Standard_True 
)

Constructor for couple of shapes. It calls methods Init(theS1, theS2, theOp, bTestSE, bTestSI) and Perform(). Params: theS1, theS2 - the initial shapes. theOp - the type of Boolean Operation; if it is not defined (set to UNKNOWN) for each shape performed check as for single shape. bTestSE - flag that specifies whether check on small edges should be performed; by default it is set to TRUE; bTestSI - flag that specifies whether check on self-interference should be performed; by default it is set to TRUE;.

Member Function Documentation

Standard_Real BRepAlgoAPI_Check::FuzzyValue ( ) const

Returns the additional tolerance.

void BRepAlgoAPI_Check::Init ( const TopoDS_Shape theS1,
const TopoDS_Shape theS2,
const BOPAlgo_Operation  theOp,
const Standard_Boolean  bTestSE,
const Standard_Boolean  bTestSI 
)
protected

Initialyzes data.

Standard_Boolean BRepAlgoAPI_Check::IsValid ( )

Shows whether shape(s) valid or not.

void BRepAlgoAPI_Check::Perform ( )

Performs the check.

const BOPAlgo_ListOfCheckResult& BRepAlgoAPI_Check::Result ( )

Returns faulty shapes.

void BRepAlgoAPI_Check::SetData ( const TopoDS_Shape theS,
const Standard_Boolean  bTestSE = Standard_True,
const Standard_Boolean  bTestSI = Standard_True 
)

Sets data for check by Init method. The method provides alternative way for checking single shape.

void BRepAlgoAPI_Check::SetData ( const TopoDS_Shape theS1,
const TopoDS_Shape theS2,
const BOPAlgo_Operation  theOp = BOPAlgo_UNKNOWN,
const Standard_Boolean  bTestSE = Standard_True,
const Standard_Boolean  bTestSI = Standard_True 
)

Sets data for check by Init method. The method provides alternative way for checking couple of shapes.

void BRepAlgoAPI_Check::SetFuzzyValue ( const Standard_Real  theFuzz)

Sets the additional tolerance.

Field Documentation

BOPAlgo_PArgumentAnalyzer BRepAlgoAPI_Check::myAnalyzer
protected
Standard_Real BRepAlgoAPI_Check::myFuzzyValue
protected
BOPAlgo_ListOfCheckResult BRepAlgoAPI_Check::myResult
protected
TopoDS_Shape BRepAlgoAPI_Check::myS1
protected
TopoDS_Shape BRepAlgoAPI_Check::myS2
protected

The documentation for this class was generated from the following file: