Open CASCADE Technology  7.0.0
Public Member Functions

Hatch_Hatcher Class Reference

The Hatcher is an algorithm to compute cross hatchings in a 2d plane. It is mainly dedicated to display purpose. More...

#include <Hatch_Hatcher.hxx>

Public Member Functions

 Hatch_Hatcher (const Standard_Real Tol, const Standard_Boolean Oriented=Standard_True)
 Returns a empty hatcher. <Tol> is the tolerance for intersections. More...
 
void Tolerance (const Standard_Real Tol)
 
Standard_Real Tolerance () const
 
void AddLine (const gp_Lin2d &L, const Hatch_LineForm T=Hatch_ANYLINE)
 Add a line <L> to be trimmed. <T> the type is only kept from information. It is not used in the computation. More...
 
void AddLine (const gp_Dir2d &D, const Standard_Real Dist)
 Add an infinite line on direction <D> at distance <Dist> from the origin to be trimmed. <Dist> may be negative. More...
 
void AddXLine (const Standard_Real X)
 Add an infinite line parallel to the Y-axis at abciss <X>. More...
 
void AddYLine (const Standard_Real Y)
 Add an infinite line parallel to the X-axis at ordinate <Y>. More...
 
void Trim (const gp_Lin2d &L, const Standard_Integer Index=0)
 Trims the lines at intersections with <L>. More...
 
void Trim (const gp_Lin2d &L, const Standard_Real Start, const Standard_Real End, const Standard_Integer Index=0)
 Trims the lines at intersections with <L> in the parameter range <Start>, <End> More...
 
void Trim (const gp_Pnt2d &P1, const gp_Pnt2d &P2, const Standard_Integer Index=0)
 Trims the line at intersection with the oriented segment P1,P2. More...
 
Standard_Integer NbIntervals () const
 Returns the total number of intervals on all the lines. More...
 
Standard_Integer NbLines () const
 Returns the number of lines. More...
 
const gp_Lin2dLine (const Standard_Integer I) const
 Returns the line of index . More...
 
Hatch_LineForm LineForm (const Standard_Integer I) const
 Returns the type of the line of index . More...
 
Standard_Boolean IsXLine (const Standard_Integer I) const
 Returns True if the line of index has a constant X value. More...
 
Standard_Boolean IsYLine (const Standard_Integer I) const
 Returns True if the line of index has a constant Y value. More...
 
Standard_Real Coordinate (const Standard_Integer I) const
 Returns the X or Y coordinate of the line of index if it is a X or a Y line. More...
 
Standard_Integer NbIntervals (const Standard_Integer I) const
 Returns the number of intervals on line of index . More...
 
Standard_Real Start (const Standard_Integer I, const Standard_Integer J) const
 Returns the first parameter of interval <J> on line . More...
 
void StartIndex (const Standard_Integer I, const Standard_Integer J, Standard_Integer &Index, Standard_Real &Par2) const
 Returns the first Index and Par2 of interval <J> on line . More...
 
Standard_Real End (const Standard_Integer I, const Standard_Integer J) const
 Returns the last parameter of interval <J> on line . More...
 
void EndIndex (const Standard_Integer I, const Standard_Integer J, Standard_Integer &Index, Standard_Real &Par2) const
 Returns the last Index and Par2 of interval <J> on line . More...
 

Detailed Description

The Hatcher is an algorithm to compute cross hatchings in a 2d plane. It is mainly dedicated to display purpose.

Computing cross hatchings is a 3 steps process :

  1. The users stores in the Hatcher a set of 2d lines to be trimmed. Methods in the "Lines" category.
  2. The user trims the lines with a boundary. The inside of a boundary is on the left side. Methods in the "Trimming" category.
  3. The user reads back the trimmed lines. Methods in the "Results" category.

The result is a set of parameter intervals on the line. The first parameter of an Interval may be RealFirst() and the last may be RealLast().

A line can be a line parallel to the axis (X or Y line or a 2D line.

The Hatcher has two modes :

Constructor & Destructor Documentation

Hatch_Hatcher::Hatch_Hatcher ( const Standard_Real  Tol,
const Standard_Boolean  Oriented = Standard_True 
)

Returns a empty hatcher. <Tol> is the tolerance for intersections.

Member Function Documentation

void Hatch_Hatcher::AddLine ( const gp_Lin2d L,
const Hatch_LineForm  T = Hatch_ANYLINE 
)

Add a line <L> to be trimmed. <T> the type is only kept from information. It is not used in the computation.

void Hatch_Hatcher::AddLine ( const gp_Dir2d D,
const Standard_Real  Dist 
)

Add an infinite line on direction <D> at distance <Dist> from the origin to be trimmed. <Dist> may be negative.

If O is the origin of the 2D plane, and V the vector perpendicular to D (in the direct direction).

A point P is on the line if : OP dot V = Dist The parameter of P on the line is OP dot D

void Hatch_Hatcher::AddXLine ( const Standard_Real  X)

Add an infinite line parallel to the Y-axis at abciss <X>.

void Hatch_Hatcher::AddYLine ( const Standard_Real  Y)

Add an infinite line parallel to the X-axis at ordinate <Y>.

Standard_Real Hatch_Hatcher::Coordinate ( const Standard_Integer  I) const

Returns the X or Y coordinate of the line of index if it is a X or a Y line.

Standard_Real Hatch_Hatcher::End ( const Standard_Integer  I,
const Standard_Integer  J 
) const

Returns the last parameter of interval <J> on line .

void Hatch_Hatcher::EndIndex ( const Standard_Integer  I,
const Standard_Integer  J,
Standard_Integer Index,
Standard_Real Par2 
) const

Returns the last Index and Par2 of interval <J> on line .

Standard_Boolean Hatch_Hatcher::IsXLine ( const Standard_Integer  I) const

Returns True if the line of index has a constant X value.

Standard_Boolean Hatch_Hatcher::IsYLine ( const Standard_Integer  I) const

Returns True if the line of index has a constant Y value.

const gp_Lin2d& Hatch_Hatcher::Line ( const Standard_Integer  I) const

Returns the line of index .

Hatch_LineForm Hatch_Hatcher::LineForm ( const Standard_Integer  I) const

Returns the type of the line of index .

Standard_Integer Hatch_Hatcher::NbIntervals ( ) const

Returns the total number of intervals on all the lines.

Standard_Integer Hatch_Hatcher::NbIntervals ( const Standard_Integer  I) const

Returns the number of intervals on line of index .

Standard_Integer Hatch_Hatcher::NbLines ( ) const

Returns the number of lines.

Standard_Real Hatch_Hatcher::Start ( const Standard_Integer  I,
const Standard_Integer  J 
) const

Returns the first parameter of interval <J> on line .

void Hatch_Hatcher::StartIndex ( const Standard_Integer  I,
const Standard_Integer  J,
Standard_Integer Index,
Standard_Real Par2 
) const

Returns the first Index and Par2 of interval <J> on line .

void Hatch_Hatcher::Tolerance ( const Standard_Real  Tol)
Standard_Real Hatch_Hatcher::Tolerance ( ) const
void Hatch_Hatcher::Trim ( const gp_Lin2d L,
const Standard_Integer  Index = 0 
)

Trims the lines at intersections with <L>.

void Hatch_Hatcher::Trim ( const gp_Lin2d L,
const Standard_Real  Start,
const Standard_Real  End,
const Standard_Integer  Index = 0 
)

Trims the lines at intersections with <L> in the parameter range <Start>, <End>

void Hatch_Hatcher::Trim ( const gp_Pnt2d P1,
const gp_Pnt2d P2,
const Standard_Integer  Index = 0 
)

Trims the line at intersection with the oriented segment P1,P2.


The documentation for this class was generated from the following file: