This class allows to compute a uniform distribution of points on a curve (ie the points will all be equally distant). More...

#include <GCPnts_UniformAbscissa.hxx>

Public Member Functions
	GCPnts_UniformAbscissa ()
	creation of a indefinite UniformAbscissa More...

	GCPnts_UniformAbscissa (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real Toler=-1)
	Computes a uniform abscissa distribution of points on the Curve `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Computes a Uniform abscissa distribution of points on a part of the Curve `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor3d_Curve &C, const Standard_Integer NbPoints, const Standard_Real Toler=-1)
	Computes a uniform abscissa distribution of points on the Curve `. <NbPoints> defines the nomber of desired points. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor3d_Curve &C, const Standard_Integer NbPoints, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Computes a Uniform abscissa distribution of points on a part of the Curve `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

void	Initialize (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <Toler>` More...

void	Initialize (const Adaptor3d_Curve &C, const Standard_Real Abscissa, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <U1>, <U2>, <Toler>` More...

void	Initialize (const Adaptor3d_Curve &C, const Standard_Integer NbPoints, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <NbPoints>, <Toler> and.` More...

void	Initialize (const Adaptor3d_Curve &C, const Standard_Integer NbPoints, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <U1>, <U2>, <Toler>.` More...

	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real Toler=-1)
	Computes a uniform abscissa distribution of points on the Curve2d `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Computes a Uniform abscissa distribution of points on a part of the Curve2d `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &C, const Standard_Integer NbPoints, const Standard_Real Toler=-1)
	Computes a uniform abscissa distribution of points on the Curve2d `. <NbPoints> defines the nomber of desired points. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &C, const Standard_Integer NbPoints, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Computes a Uniform abscissa distribution of points on a part of the Curve2d `. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.` More...

void	Initialize (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <Toler>` More...

void	Initialize (const Adaptor2d_Curve2d &C, const Standard_Real Abscissa, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <U1>, <U2>, <Toler>` More...

void	Initialize (const Adaptor2d_Curve2d &C, const Standard_Integer NbPoints, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <NbPoints>, <Toler> and.` More...

void	Initialize (const Adaptor2d_Curve2d &C, const Standard_Integer NbPoints, const Standard_Real U1, const Standard_Real U2, const Standard_Real Toler=-1)
	Initialize the algoritms with `, <Abscissa>, <U1>, <U2>, <Toler>.` More...

Standard_Boolean	IsDone () const

Standard_Integer	NbPoints () const

Standard_Real	Parameter (const Standard_Integer Index) const
	returns the computed Parameter of index <Index>. More...

Standard_Real	Abscissa () const
	returne the current abscissa ie the distance between two consecutive points More...

Detailed Description

This class allows to compute a uniform distribution of points on a curve (ie the points will all be equally distant).

Constructor & Destructor Documentation

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa ( )

creation of a indefinite UniformAbscissa

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	Toler = `-1`
	)

Computes a uniform abscissa distribution of points on the Curve . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Computes a Uniform abscissa distribution of points on a part of the Curve . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	Toler = `-1`
	)

Computes a uniform abscissa distribution of points on the Curve . <NbPoints> defines the nomber of desired points. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Computes a Uniform abscissa distribution of points on a part of the Curve . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	Toler = `-1`
	)

Computes a uniform abscissa distribution of points on the Curve2d . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Computes a Uniform abscissa distribution of points on a part of the Curve2d . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	Toler = `-1`
	)

Computes a uniform abscissa distribution of points on the Curve2d . <NbPoints> defines the nomber of desired points. Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Computes a Uniform abscissa distribution of points on a part of the Curve2d . Parameter Toler is equal Precision::Confusion by default. It Is used for more precise calculation of curve length.

Member Function Documentation

Standard_Real GCPnts_UniformAbscissa::Abscissa ( ) const

returne the current abscissa ie the distance between two consecutive points

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <Toler>

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <U1>, <U2>, <Toler>

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <NbPoints>, <Toler> and.

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <U1>, <U2>, <Toler>.

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <Toler>

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	C,
		const Standard_Real	Abscissa,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <U1>, <U2>, <Toler>

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <NbPoints>, <Toler> and.

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	C,
		const Standard_Integer	NbPoints,
		const Standard_Real	U1,
		const Standard_Real	U2,
		const Standard_Real	Toler = `-1`
	)

Initialize the algoritms with , <Abscissa>, <U1>, <U2>, <Toler>.

Standard_Boolean GCPnts_UniformAbscissa::IsDone ( ) const

Standard_Integer GCPnts_UniformAbscissa::NbPoints ( ) const

Standard_Real GCPnts_UniformAbscissa::Parameter ( const Standard_Integer Index ) const

returns the computed Parameter of index <Index>.

The documentation for this class was generated from the following file:

GCPnts_UniformAbscissa.hxx

GCPnts_UniformAbscissa Class Reference

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation