Open CASCADE Technology  6.9.1
Public Member Functions
ShapeUpgrade_SplitCurve3dContinuity Class Reference

Corrects/splits a 2d curve with a continuity criterion. Tolerance is used to correct the curve at a knot that respects geometrically the criterion, in order to reduce the multiplicity of the knot. More...

#include <ShapeUpgrade_SplitCurve3dContinuity.hxx>

Inheritance diagram for ShapeUpgrade_SplitCurve3dContinuity:
Inheritance graph
[legend]

Public Member Functions

 ShapeUpgrade_SplitCurve3dContinuity ()
 Empty constructor. More...
 
void SetCriterion (const GeomAbs_Shape Criterion)
 Sets criterion for splitting. More...
 
void SetTolerance (const Standard_Real Tol)
 Sets tolerance. More...
 
virtual void Compute ()
 Calculates points for correction/splitting of the curve. More...
 
const Handle< Geom_Curve > & GetCurve () const
 
- Public Member Functions inherited from ShapeUpgrade_SplitCurve3d
 ShapeUpgrade_SplitCurve3d ()
 Empty constructor. More...
 
void Init (const Handle< Geom_Curve > &C)
 Initializes with curve with its first and last parameters. More...
 
void Init (const Handle< Geom_Curve > &C, const Standard_Real First, const Standard_Real Last)
 Initializes with curve with its parameters. More...
 
virtual void Build (const Standard_Boolean Segment)
 If Segment is True, the result is composed with segments of the curve bounded by the SplitValues. If Segment is False, the result is composed with trimmed Curves all based on the same complete curve. More...
 
const Handle< TColGeom_HArray1OfCurve > & GetCurves () const
 
- Public Member Functions inherited from ShapeUpgrade_SplitCurve
 ShapeUpgrade_SplitCurve ()
 Empty constructor. More...
 
void Init (const Standard_Real First, const Standard_Real Last)
 Initializes with curve first and last parameters. More...
 
void SetSplitValues (const Handle< TColStd_HSequenceOfReal > &SplitValues)
 Sets the parameters where splitting has to be done. More...
 
const Handle< TColStd_HSequenceOfReal > & SplitValues () const
 returns all the splitting values including the First and Last parameters of the input curve Merges input split values and new ones into myGlobalKnots More...
 
void Perform (const Standard_Boolean Segment=Standard_True)
 Performs correction/splitting of the curve. First defines splitting values by method Compute(), then calls method Build(). More...
 
Standard_Boolean Status (const ShapeExtend_Status status) const
 Returns the status OK - no splitting is needed DONE1 - splitting required and gives more than one segment DONE2 - splitting is required, but gives only one segment (initial) DONE3 - geometric form of the curve or parametrisation is modified. More...
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const Handle_Standard_Type & DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Additional Inherited Members

- Protected Attributes inherited from ShapeUpgrade_SplitCurve3d
Handle< Geom_CurvemyCurve
 
Handle< TColGeom_HArray1OfCurvemyResultingCurves
 
- Protected Attributes inherited from ShapeUpgrade_SplitCurve
Handle< TColStd_HSequenceOfRealmySplitValues
 
Standard_Integer myNbCurves
 
Standard_Integer myStatus
 

Detailed Description

Corrects/splits a 2d curve with a continuity criterion. Tolerance is used to correct the curve at a knot that respects geometrically the criterion, in order to reduce the multiplicity of the knot.

Constructor & Destructor Documentation

ShapeUpgrade_SplitCurve3dContinuity::ShapeUpgrade_SplitCurve3dContinuity ( )

Empty constructor.

Member Function Documentation

virtual void ShapeUpgrade_SplitCurve3dContinuity::Compute ( )
virtual

Calculates points for correction/splitting of the curve.

Reimplemented from ShapeUpgrade_SplitCurve.

const Handle< Geom_Curve >& ShapeUpgrade_SplitCurve3dContinuity::GetCurve ( ) const
void ShapeUpgrade_SplitCurve3dContinuity::SetCriterion ( const GeomAbs_Shape  Criterion)

Sets criterion for splitting.

void ShapeUpgrade_SplitCurve3dContinuity::SetTolerance ( const Standard_Real  Tol)

Sets tolerance.


The documentation for this class was generated from the following file: