Open CASCADE Technology  6.9.1
Public Member Functions
Geom_SurfaceOfRevolution Class Reference

Describes a surface of revolution (revolved surface). Such a surface is obtained by rotating a curve (called the "meridian") through a complete revolution about an axis (referred to as the "axis of revolution"). The curve and the axis must be in the same plane (the "reference plane" of the surface). Rotation around the axis of revolution in the trigonometric sense defines the u parametric direction. So the u parameter is an angle, and its origin is given by the position of the meridian on the surface. The parametric range for the u parameter is: [ 0, 2.*Pi ] The v parameter is that of the meridian. Note: A surface of revolution is built from a copy of the original meridian. As a result the original meridian is not modified when the surface is modified. The form of a surface of revolution is typically a general revolution surface (GeomAbs_RevolutionForm). It can be: More...

#include <Geom_SurfaceOfRevolution.hxx>

Inheritance diagram for Geom_SurfaceOfRevolution:
Inheritance graph
[legend]

Public Member Functions

 Geom_SurfaceOfRevolution (const Handle< Geom_Curve > &C, const gp_Ax1 &A1)
 C : is the meridian or the referenced curve. A1 is the axis of revolution. The form of a SurfaceOfRevolution can be : . a general revolution surface (RevolutionForm), . a conical surface if the meridian is a line or a trimmed line (ConicalForm), . a cylindrical surface if the meridian is a line or a trimmed line parallel to the revolution axis (CylindricalForm), . a planar surface if the meridian is a line perpendicular to the revolution axis of the surface (PlanarForm). . a spherical surface, . a toroidal surface, . a quadric surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't self-intersects. More...
 
void SetAxis (const gp_Ax1 &A1)
 Changes the axis of revolution. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...
 
void SetDirection (const gp_Dir &V)
 Changes the direction of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...
 
void SetBasisCurve (const Handle< Geom_Curve > &C)
 Changes the revolved curve of the surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't self-intersects. More...
 
void SetLocation (const gp_Pnt &P)
 Changes the location point of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve. More...
 
gp_Ax1 Axis () const
 Returns the revolution axis of the surface. More...
 
const gp_PntLocation () const
 Returns the location point of the axis of revolution. More...
 
gp_Ax2 ReferencePlane () const
 Computes the position of the reference plane of the surface defined by the basis curve and the symmetry axis. The location point is the location point of the revolution's axis, the XDirection of the plane is given by the revolution's axis and the orientation of the normal to the plane is given by the sense of revolution. More...
 
void UReverse ()
 Changes the orientation of this surface of revolution in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence: More...
 
Standard_Real UReversedParameter (const Standard_Real U) const
 Computes the u parameter on the modified surface, when reversing its u parametric direction, for any point of u parameter U on this surface of revolution. In the case of a revolved surface: More...
 
void VReverse ()
 Changes the orientation of this surface of revolution in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence: More...
 
Standard_Real VReversedParameter (const Standard_Real V) const
 Computes the v parameter on the modified surface, when reversing its v parametric direction, for any point of v parameter V on this surface of revolution. In the case of a revolved surface: More...
 
virtual void TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const
 Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
 
virtual gp_GTrsf2d ParametricTransformation (const gp_Trsf &T) const
 Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
 
void Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const
 Returns the parametric bounds U1, U2 , V1 and V2 of this surface. A surface of revolution is always complete, so U1 = 0, U2 = 2*PI. More...
 
Standard_Boolean IsUClosed () const
 IsUClosed always returns true. More...
 
Standard_Boolean IsVClosed () const
 IsVClosed returns true if the meridian of this surface of revolution is closed. More...
 
Standard_Boolean IsCNu (const Standard_Integer N) const
 IsCNu always returns true. More...
 
Standard_Boolean IsCNv (const Standard_Integer N) const
 IsCNv returns true if the degree of continuity of the meridian of this surface of revolution is at least N. Raised if N < 0. More...
 
Standard_Boolean IsUPeriodic () const
 Returns True. More...
 
Standard_Boolean IsVPeriodic () const
 IsVPeriodic returns true if the meridian of this surface of revolution is periodic. More...
 
Handle< Geom_CurveUIso (const Standard_Real U) const
 Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution. More...
 
Handle< Geom_CurveVIso (const Standard_Real V) const
 Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution. More...
 
void D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const
 Computes the point P (U, V) on the surface. U is the angle of the rotation around the revolution axis. The direction of this axis gives the sense of rotation. V is the parameter of the revolved curve. More...
 
void D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const
 Computes the current point and the first derivatives in the directions U and V. Raised if the continuity of the surface is not C1. More...
 
void D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const
 Computes the current point, the first and the second derivatives in the directions U and V. Raised if the continuity of the surface is not C2. More...
 
void D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const
 Computes the current point, the first,the second and the third derivatives in the directions U and V. Raised if the continuity of the surface is not C3. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const
 Computes the derivative of order Nu in the direction u and Nv in the direction v. More...
 
void LocalD0 (const Standard_Real U, const Standard_Real V, const Standard_Integer USide, gp_Pnt &P) const
 
void LocalD1 (const Standard_Real U, const Standard_Real V, const Standard_Integer USide, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const
 
void LocalD2 (const Standard_Real U, const Standard_Real V, const Standard_Integer USide, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const
 
void LocalD3 (const Standard_Real U, const Standard_Real V, const Standard_Integer USide, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const
 
gp_Vec LocalDN (const Standard_Real U, const Standard_Real V, const Standard_Integer USide, const Standard_Integer Nu, const Standard_Integer Nv) const
 
void Transform (const gp_Trsf &T)
 Applies the transformation T to this surface of revolution. More...
 
Handle< Geom_GeometryCopy () const
 Creates a new object which is a copy of this surface of revolution. More...
 
- Public Member Functions inherited from Geom_SweptSurface
GeomAbs_Shape Continuity () const
 returns the continuity of the surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the surface, C2 : continuity of the second derivative all along the surface, C3 : continuity of the third derivative all along the surface, G1 : tangency continuity all along the surface, G2 : curvature continuity all along the surface, CN : the order of continuity is infinite. More...
 
const gp_DirDirection () const
 Returns the reference direction of the swept surface. For a surface of revolution it is the direction of the revolution axis, for a surface of linear extrusion it is the direction of extrusion. More...
 
Handle< Geom_CurveBasisCurve () const
 Returns the referenced curve of the surface. For a surface of revolution it is the revolution curve, for a surface of linear extrusion it is the extruded curve. More...
 
- Public Member Functions inherited from Geom_Surface
Handle< Geom_SurfaceUReversed () const
 Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
Handle< Geom_SurfaceVReversed () const
 Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
 
virtual Standard_Real UPeriod () const
 Returns the period of this surface in the u parametric direction. raises if the surface is not uperiodic. More...
 
virtual Standard_Real VPeriod () const
 Returns the period of this surface in the v parametric direction. raises if the surface is not vperiodic. More...
 
gp_Pnt Value (const Standard_Real U, const Standard_Real V) const
 Computes the point of parameter U on the surface. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const Handle_Standard_Type & DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Additional Inherited Members

- Protected Attributes inherited from Geom_SweptSurface
Handle< Geom_CurvebasisCurve
 
gp_Dir direction
 
GeomAbs_Shape smooth
 

Detailed Description

Describes a surface of revolution (revolved surface). Such a surface is obtained by rotating a curve (called the "meridian") through a complete revolution about an axis (referred to as the "axis of revolution"). The curve and the axis must be in the same plane (the "reference plane" of the surface). Rotation around the axis of revolution in the trigonometric sense defines the u parametric direction. So the u parameter is an angle, and its origin is given by the position of the meridian on the surface. The parametric range for the u parameter is: [ 0, 2.*Pi ] The v parameter is that of the meridian. Note: A surface of revolution is built from a copy of the original meridian. As a result the original meridian is not modified when the surface is modified. The form of a surface of revolution is typically a general revolution surface (GeomAbs_RevolutionForm). It can be:

Constructor & Destructor Documentation

Geom_SurfaceOfRevolution::Geom_SurfaceOfRevolution ( const Handle< Geom_Curve > &  C,
const gp_Ax1 A1 
)

C : is the meridian or the referenced curve. A1 is the axis of revolution. The form of a SurfaceOfRevolution can be : . a general revolution surface (RevolutionForm), . a conical surface if the meridian is a line or a trimmed line (ConicalForm), . a cylindrical surface if the meridian is a line or a trimmed line parallel to the revolution axis (CylindricalForm), . a planar surface if the meridian is a line perpendicular to the revolution axis of the surface (PlanarForm). . a spherical surface, . a toroidal surface, . a quadric surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't self-intersects.

Member Function Documentation

gp_Ax1 Geom_SurfaceOfRevolution::Axis ( ) const

Returns the revolution axis of the surface.

void Geom_SurfaceOfRevolution::Bounds ( Standard_Real U1,
Standard_Real U2,
Standard_Real V1,
Standard_Real V2 
) const
virtual

Returns the parametric bounds U1, U2 , V1 and V2 of this surface. A surface of revolution is always complete, so U1 = 0, U2 = 2*PI.

Implements Geom_Surface.

Handle< Geom_Geometry > Geom_SurfaceOfRevolution::Copy ( ) const
virtual

Creates a new object which is a copy of this surface of revolution.

Implements Geom_Geometry.

void Geom_SurfaceOfRevolution::D0 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P 
) const
virtual

Computes the point P (U, V) on the surface. U is the angle of the rotation around the revolution axis. The direction of this axis gives the sense of rotation. V is the parameter of the revolved curve.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::D1 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
virtual

Computes the current point and the first derivatives in the directions U and V. Raised if the continuity of the surface is not C1.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::D2 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
virtual

Computes the current point, the first and the second derivatives in the directions U and V. Raised if the continuity of the surface is not C2.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::D3 ( const Standard_Real  U,
const Standard_Real  V,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
virtual

Computes the current point, the first,the second and the third derivatives in the directions U and V. Raised if the continuity of the surface is not C3.

Implements Geom_Surface.

gp_Vec Geom_SurfaceOfRevolution::DN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
virtual

Computes the derivative of order Nu in the direction u and Nv in the direction v.

Raised if the continuity of the surface is not CNu in the u direction and CNv in the v direction. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0. The following functions evaluates the local derivatives on surface. Useful to manage discontinuities on the surface. if Side = 1 -> P = S( U+,V ) if Side = -1 -> P = S( U-,V ) else P is betveen discontinuities can be evaluated using methods of global evaluations P = S( U ,V )

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsCNu ( const Standard_Integer  N) const
virtual

IsCNu always returns true.

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsCNv ( const Standard_Integer  N) const
virtual

IsCNv returns true if the degree of continuity of the meridian of this surface of revolution is at least N. Raised if N < 0.

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsUClosed ( ) const
virtual

IsUClosed always returns true.

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsUPeriodic ( ) const
virtual

Returns True.

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsVClosed ( ) const
virtual

IsVClosed returns true if the meridian of this surface of revolution is closed.

Implements Geom_Surface.

Standard_Boolean Geom_SurfaceOfRevolution::IsVPeriodic ( ) const
virtual

IsVPeriodic returns true if the meridian of this surface of revolution is periodic.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::LocalD0 ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  USide,
gp_Pnt P 
) const
void Geom_SurfaceOfRevolution::LocalD1 ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  USide,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V 
) const
void Geom_SurfaceOfRevolution::LocalD2 ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  USide,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV 
) const
void Geom_SurfaceOfRevolution::LocalD3 ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  USide,
gp_Pnt P,
gp_Vec D1U,
gp_Vec D1V,
gp_Vec D2U,
gp_Vec D2V,
gp_Vec D2UV,
gp_Vec D3U,
gp_Vec D3V,
gp_Vec D3UUV,
gp_Vec D3UVV 
) const
gp_Vec Geom_SurfaceOfRevolution::LocalDN ( const Standard_Real  U,
const Standard_Real  V,
const Standard_Integer  USide,
const Standard_Integer  Nu,
const Standard_Integer  Nv 
) const
const gp_Pnt& Geom_SurfaceOfRevolution::Location ( ) const

Returns the location point of the axis of revolution.

virtual gp_GTrsf2d Geom_SurfaceOfRevolution::ParametricTransformation ( const gp_Trsf T) const
virtual

Returns a 2d transformation used to find the new parameters of a point on the transformed surface.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are obtained by transforming U,V with th 2d transformation returned by

me->ParametricTransformation(T)

This methods returns a scale centered on the U axis with BasisCurve()->ParametricTransformation(T)

Reimplemented from Geom_Surface.

gp_Ax2 Geom_SurfaceOfRevolution::ReferencePlane ( ) const

Computes the position of the reference plane of the surface defined by the basis curve and the symmetry axis. The location point is the location point of the revolution's axis, the XDirection of the plane is given by the revolution's axis and the orientation of the normal to the plane is given by the sense of revolution.

Raised if the revolved curve is not planar or if the revolved curve and the symmetry axis are not in the same plane or if the maximum of distance between the axis and the revolved curve is lower or equal to Resolution from gp.

void Geom_SurfaceOfRevolution::SetAxis ( const gp_Ax1 A1)

Changes the axis of revolution. Warnings : It is not checked that the axis is in the plane of the revolved curve.

void Geom_SurfaceOfRevolution::SetBasisCurve ( const Handle< Geom_Curve > &  C)

Changes the revolved curve of the surface. Warnings : It is not checked that the curve C is planar and that the surface axis is in the plane of the curve. It is not checked that the revolved curve C doesn't self-intersects.

void Geom_SurfaceOfRevolution::SetDirection ( const gp_Dir V)

Changes the direction of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve.

void Geom_SurfaceOfRevolution::SetLocation ( const gp_Pnt P)

Changes the location point of the revolution axis. Warnings : It is not checked that the axis is in the plane of the revolved curve.

void Geom_SurfaceOfRevolution::Transform ( const gp_Trsf T)
virtual

Applies the transformation T to this surface of revolution.

Implements Geom_Geometry.

virtual void Geom_SurfaceOfRevolution::TransformParameters ( Standard_Real U,
Standard_Real V,
const gp_Trsf T 
) const
virtual

Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are the new values of U,V after calling

me->TranformParameters(U,V,T)

This methods multiplies V by BasisCurve()->ParametricTransformation(T)

Reimplemented from Geom_Surface.

Handle< Geom_Curve > Geom_SurfaceOfRevolution::UIso ( const Standard_Real  U) const
virtual

Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::UReverse ( )
virtual

Changes the orientation of this surface of revolution in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence:

  • UReverse reverses the direction of the axis of revolution of this surface,

Implements Geom_Surface.

Standard_Real Geom_SurfaceOfRevolution::UReversedParameter ( const Standard_Real  U) const
virtual

Computes the u parameter on the modified surface, when reversing its u parametric direction, for any point of u parameter U on this surface of revolution. In the case of a revolved surface:

  • UReversedParameter returns 2.*Pi - U

Implements Geom_Surface.

Handle< Geom_Curve > Geom_SurfaceOfRevolution::VIso ( const Standard_Real  V) const
virtual

Computes the U isoparametric curve of this surface of revolution. It is the curve obtained by rotating the meridian through an angle U about the axis of revolution.

Implements Geom_Surface.

void Geom_SurfaceOfRevolution::VReverse ( )
virtual

Changes the orientation of this surface of revolution in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. Hence the orientation of the surface is reversed. As a consequence:

  • VReverse reverses the meridian of this surface of revolution.

Implements Geom_Surface.

Standard_Real Geom_SurfaceOfRevolution::VReversedParameter ( const Standard_Real  V) const
virtual

Computes the v parameter on the modified surface, when reversing its v parametric direction, for any point of v parameter V on this surface of revolution. In the case of a revolved surface:

  • VReversedParameter returns the reversed parameter given by the function ReversedParameter called with V on the meridian.

Implements Geom_Surface.


The documentation for this class was generated from the following file: