Open CASCADE Technology  6.9.1
Public Member Functions | Protected Member Functions
AIS_RadiusDimension Class Reference

Radius dimension. Can be constructued: More...

#include <AIS_RadiusDimension.hxx>

Inheritance diagram for AIS_RadiusDimension:
Inheritance graph
[legend]

Public Member Functions

 AIS_RadiusDimension (const gp_Circ &theCircle)
 Create radius dimension for the circle geometry. More...
 
 AIS_RadiusDimension (const gp_Circ &theCircle, const gp_Pnt &theAnchorPoint)
 Create radius dimension for the circle geometry and define its orientation by location of the first point on that circle. More...
 
 AIS_RadiusDimension (const TopoDS_Shape &theShape)
 Create radius dimension for the arbitrary shape (if possible). More...
 
const gp_CircCircle () const
 
const gp_PntAnchorPoint () const
 
const TopoDS_ShapeShape () const
 
void SetMeasuredGeometry (const gp_Circ &theCircle)
 Measure radius of the circle. The dimension will become invalid if the radius of the circle is less than Precision::Confusion(). More...
 
void SetMeasuredGeometry (const gp_Circ &theCircle, const gp_Pnt &theAnchorPoint)
 Measure radius of the circle and orient the dimension so the dimension lines attaches to anchor point on the circle. The dimension will become invalid if the radius of the circle is less than Precision::Confusion(). More...
 
void SetMeasuredGeometry (const TopoDS_Shape &theShape)
 Measure radius on the passed shape, if applicable. The dimension will become invalid if the passed shape is not measurable or if measured diameter value is less than Precision::Confusion(). More...
 
virtual const TCollection_AsciiStringGetDisplayUnits () const
 
virtual const TCollection_AsciiStringGetModelUnits () const
 
virtual void SetDisplayUnits (const TCollection_AsciiString &theUnits)
 
virtual void SetModelUnits (const TCollection_AsciiString &theUnits)
 
virtual void SetTextPosition (const gp_Pnt &theTextPos)
 Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment. More...
 
virtual const gp_Pnt GetTextPosition () const
 Computes absolute text position from dimension parameters (flyout, plane and text alignment). More...
 
- Public Member Functions inherited from AIS_Dimension
 AIS_Dimension (const AIS_KindOfDimension theType)
 Constructor with default parameters values. More...
 
Standard_Real GetValue () const
 Gets dimension measurement value. If the value to display is not specified by user, then the dimension object is responsible to compute it on its own in model space coordinates. More...
 
void SetCustomValue (const Standard_Real theValue)
 Sets user-defined dimension value. The user-defined dimension value is specified in model space, and affect by unit conversion during the display. More...
 
const gp_PlnGetPlane () const
 Get the dimension plane in which the 2D dimension presentation is computed. By default, if plane is not defined by user, it is computed automatically after dimension geometry is computed. If computed dimension geometry (points) can't be placed on the user-defined plane, dimension geometry was set as invalid (validity flag is set to false) and dimension presentation will not be computed. If user-defined plane allow geometry placement on it, it will be used for computing of the dimension presentation. More...
 
const Standard_Integer GetGeometryType () const
 Geometry type defines type of shapes on which the dimension is to be built. More...
 
virtual void SetCustomPlane (const gp_Pln &thePlane)
 Sets user-defined plane where the 2D dimension presentation will be placed. Checks validity of this plane if geometry has been set already. Validity of the plane is checked according to the geometry set and has different criteria for different kinds of dimensions. More...
 
void UnsetCustomPlane ()
 Unsets user-defined plane. Therefore the plane for dimension will be computed automatically. More...
 
Standard_Boolean IsTextPositionCustom () const
 
Handle< Prs3d_DimensionAspectDimensionAspect () const
 Gets the dimension aspect from AIS object drawer. Dimension aspect contains aspects of line, text and arrows for dimension presentation. More...
 
void SetDimensionAspect (const Handle< Prs3d_DimensionAspect > &theDimensionAspect)
 Sets new dimension aspect for the interactive object drawer. The dimension aspect provides dynamic properties which are generally used during computation of dimension presentations. More...
 
AIS_KindOfDimension KindOfDimension () const
 
virtual AIS_KindOfInteractive Type () const
 
virtual Standard_Boolean AcceptDisplayMode (const Standard_Integer theMode) const
 Returns true if the class of objects accepts the display mode theMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by object. More...
 
AIS_DisplaySpecialSymbol DisplaySpecialSymbol () const
 
void SetDisplaySpecialSymbol (const AIS_DisplaySpecialSymbol theDisplaySpecSymbol)
 Specifies whether to display special symbol or not. More...
 
Standard_ExtCharacter SpecialSymbol () const
 
void SetSpecialSymbol (const Standard_ExtCharacter theSpecialSymbol)
 Specifies special symbol. More...
 
void UnsetFixedTextPosition ()
 Unsets user defined text positioning and enables text positioning by other parameters: text alignment, extension size, flyout and custom plane. More...
 
Standard_Real SelToleranceForText2d () const
 Returns selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used Important! Only for 2d text. More...
 
void SetSelToleranceForText2d (const Standard_Real theTol)
 Sets selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used to change this tolerance use this method Important! Only for 2d text. More...
 
Standard_Real GetFlyout () const
 
void SetFlyout (const Standard_Real theFlyout)
 Sets flyout value for dimension. More...
 
virtual Standard_Boolean IsValid () const
 Check that the input geometry for dimension is valid and the presentation can be successfully computed. More...
 
- Public Member Functions inherited from AIS_InteractiveObject
virtual Standard_Integer Signature () const
 Specifies additional characteristics of Interactive Objects. A signature is, in fact, an index with integer values assigned different properties. This method is frequently used in conjuction with Type to give a particular type and signature to an Interactive Object. By default, the Interactive Object has a None type and a signature of 0. Among the datums, this signature is attributed to the shape The remaining datums have the following default signatures: More...
 
virtual Standard_Boolean AcceptShapeDecomposition () const
 Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection. The most used Interactive Object is AIS_Shape. Activation methods for standard selection modes are proposed in the Interactive Context. These include selection by vertex or by edges. For datums with the same behavior as AIS_Shape, such as vetices and edges, we must redefine the virtual method so that AcceptShapeDecomposition returns false. Rule for selection : Mode 0 : Selection of the interactive Object itself Mode 1 : Selection of vertices Mode 2 : Selection Of Edges Mode 3 : Selection Of Wires Mode 4 : Selection Of Faces ... More...
 
void SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE)
 change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...
 
Aspect_TypeOfFacingModel CurrentFacingModel () const
 Returns the current facing model which is in effect. More...
 
virtual void SetColor (const Quantity_Color &aColor)
 
virtual void SetColor (const Quantity_NameOfColor aColor)
 only the interactive obj knowns which Drawer attribute is affected by the color (ex: for a wire, it's the wireaspect field of the drawer, but for a vertex, only the point aspect field is affected by the color) WARNING : Do not forget to set the corresponding fields here (hasOwnColor and myOwnColor) More...
 
virtual void UnsetColor ()
 Removes color settings. Only the Interactive Object knows which Drawer attribute is affected by the color setting. For a wire, for example, wire aspect is the attribute affected. For a vertex, however, only point aspect is affected by the color setting. More...
 
virtual void SetWidth (const Standard_Real aValue)
 Allows you to provide the setting aValue for width. Only the Interactive Object knows which Drawer attribute is affected by the width setting. More...
 
virtual void UnsetWidth ()
 
virtual Standard_Integer DefaultDisplayMode () const
 Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More...
 
void Redisplay (const Standard_Boolean AllModes=Standard_False)
 Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...
 
void SetInfiniteState (const Standard_Boolean aFlag=Standard_True)
 Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More...
 
Standard_Boolean IsInfinite () const
 Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More...
 
Standard_Boolean HasInteractiveContext () const
 Indicates whether the Interactive Object has a pointer to an interactive context. More...
 
Handle< AIS_InteractiveContextGetContext () const
 Returns the context pointer to the interactive context. More...
 
virtual void SetContext (const Handle< AIS_InteractiveContext > &aCtx)
 Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...
 
Standard_Boolean HasOwner () const
 Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...
 
const Handle< Standard_Transient > & GetOwner () const
 Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...
 
void SetOwner (const Handle< Standard_Transient > &ApplicativeEntity)
 Allows you to attribute the owner ApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...
 
void ClearOwner ()
 Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...
 
Standard_Boolean HasUsers () const
 
const TColStd_ListOfTransientUsers () const
 
void AddUser (const Handle< Standard_Transient > &aUser)
 
void ClearUsers ()
 
Standard_Boolean HasDisplayMode () const
 Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More...
 
void SetDisplayMode (const Standard_Integer aMode)
 Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More...
 
void UnsetDisplayMode ()
 Removes display mode settings from the interactive object. More...
 
Standard_Integer DisplayMode () const
 Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More...
 
Standard_Boolean HasSelectionMode () const
 Allows you to change the selection mode of an Interactive Object. The default selection mode setting is 0. For shapes, for example, the selection modes are as follows: More...
 
Standard_Integer SelectionMode () const
 Returns the selection mode of the interactive object. More...
 
void SetSelectionMode (const Standard_Integer aMode)
 You can change the default selection mode index aMode of an Interactive Object. This is only of interest if you decide that mode 0 adopted by convention will not do. More...
 
void UnsetSelectionMode ()
 You can change the default selection mode index of an Interactive Object. This is only of interest if you decide that the 0 mode adopted by convention will not do. More...
 
Standard_Integer SelectionPriority () const
 Returns the selection priority setting. -1 indicates that there is none. You can modify the selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6 if both objects are selected at the same time. You could give vertices priority 8, edges priority 7, faces priority 6, and shapes priority 5. If a vertex, an edge and a face are simultaneously detected during selection, only the vertex will then be highlighted. For trihedra, for example, the default priorities are the following four: More...
 
void SetSelectionPriority (const Standard_Integer aPriority)
 Allows you to provide a setting aPriority for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More...
 
void UnsetSelectionPriority ()
 Removes the setting for selection priority. SelectionPriority then returns -1. More...
 
Standard_Boolean HasSelectionPriority () const
 Returns true if there is a setting for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More...
 
Standard_Boolean HasHilightMode () const
 Returns true if the Interactive Object is in highlight mode. More...
 
Standard_Integer HilightMode () const
 Returns the setting for highlight mode. At dynamic detection, the presentation echoed by the Interactive Context, is by default the presentation already on the screen. You can specify a Highlight presentation mode which is valid no matter what the active representation of the object. It makes no difference whether this choice is temporary or definitive. To do this, we use the following functions: More...
 
void SetHilightMode (const Standard_Integer anIndex)
 Sets the highlight mode anIndex for the interactive object. If, for example, you want to systematically highlight the wireframe presentation of a shape - whether visualized in wireframe presentation or with shading - you set the highlight mode to 0. More...
 
void UnsetHilightMode ()
 Allows the user to take a given Prs for hilight ex : for a shape which would be displayed in shading mode the hilight Prs is the wireframe mode. if No specific hilight mode is defined, the displayed Prs will be the hilighted one. More...
 
Standard_Boolean HasColor () const
 Returns true if the Interactive Object has color. More...
 
virtual Quantity_NameOfColor Color () const
 Returns the color setting of the Interactive Object. More...
 
virtual void Color (Quantity_Color &aColor) const
 
Standard_Boolean HasWidth () const
 Returns true if the Interactive Object has width. More...
 
Standard_Real Width () const
 Returns the width setting of the Interactive Object. More...
 
Standard_Boolean HasMaterial () const
 Returns true if the Interactive Object has a setting for material. More...
 
virtual Graphic3d_NameOfMaterial Material () const
 Returns the current material setting. This will be on of the following materials: More...
 
virtual void SetMaterial (const Graphic3d_NameOfMaterial aName)
 Sets the name aName for material defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...
 
virtual void SetMaterial (const Graphic3d_MaterialAspect &aName)
 Sets the material aMat defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...
 
virtual void UnsetMaterial ()
 Removes the setting for material. More...
 
virtual void SetTransparency (const Standard_Real aValue=0.6)
 Attributes a setting aValue for transparency. The transparency value should be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. Warning At a value of 1.0, there may be nothing visible. More...
 
Standard_Boolean IsTransparent () const
 Returns true if there is a transparency setting. More...
 
virtual Standard_Real Transparency () const
 Returns the transparency setting. This will be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. More...
 
virtual void UnsetTransparency ()
 Removes the transparency setting. The object is opaque by default. More...
 
virtual void UnsetAttributes ()
 Clears settings provided by the drawing tool aDrawer. More...
 
void State (const Standard_Integer theState)
 
Standard_Integer State () const
 
Standard_Boolean HasPresentation () const
 Returns TRUE when this object has a presentation in the current DisplayMode() More...
 
Handle< Prs3d_PresentationPresentation () const
 Returns the current presentation of this object according to the current DisplayMode() More...
 
void SetAspect (const Handle< Prs3d_BasicAspect > &anAspect, const Standard_Boolean globalChange=Standard_True)
 Sets the graphic basic aspect to the current presentation. When <globalChange> is TRUE , the full object presentation is changed. When <globalChange> is FALSE , only the current group of the object presentation is changed. More...
 
virtual void SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
 Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More...
 
virtual Standard_Boolean HasPolygonOffsets () const
 Returns Standard_True if <myDrawer> has non-null shading aspect. More...
 
virtual void PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
 Retrieves current polygon offsets settings from <myDrawer>. More...
 
virtual void BoundingBox (Bnd_Box &theBndBox)
 Returns bounding box of object correspondingly to its current display mode. More...
 
- Public Member Functions inherited from SelectMgr_SelectableObject
void RecomputePrimitives ()
 Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
 
void RecomputePrimitives (const Standard_Integer theMode)
 Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
 
void AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
 Adds the selection aSelection with the selection mode index aMode to this framework. More...
 
void ClearSelections (const Standard_Boolean update=Standard_False)
 Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...
 
const Handle< SelectMgr_Selection > & Selection (const Standard_Integer aMode) const
 Returns the selection Selection having the selection mode aMode. More...
 
Standard_Boolean HasSelection (const Standard_Integer aMode) const
 Returns true if a selection corresponding to the selection mode aMode is present in this framework. More...
 
void Init ()
 Begins the iteration scanning for sensitive primitives. More...
 
Standard_Boolean More () const
 Continues the iteration scanning for sensitive primitives. More...
 
void Next ()
 Continues the iteration scanning for sensitive primitives. More...
 
const Handle< SelectMgr_Selection > & CurrentSelection () const
 Returns the current selection in this framework. More...
 
void ResetTransformation ()
 resets local transformation to identity. More...
 
virtual void UpdateTransformation ()
 Recomputes the location of the selection aSelection. More...
 
virtual void UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
 Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...
 
virtual void HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq)
 Method which draws selected owners ( for fast presentation draw ) More...
 
virtual void ClearSelected ()
 Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...
 
virtual void HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Quantity_NameOfColor theColor, const Handle< SelectMgr_EntityOwner > &theOwner)
 Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...
 
virtual Standard_Boolean IsAutoHilight () const
 If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...
 
virtual void SetAutoHilight (const Standard_Boolean newAutoHilight)
 Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More...
 
Handle< Prs3d_PresentationGetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)
 
Handle< Prs3d_PresentationGetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)
 
virtual void SetZLayer (const Graphic3d_ZLayerId theLayerId)
 Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...
 
void UpdateSelection (const Standard_Integer theMode=-1)
 Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...
 
virtual void SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes the drawing tool theDrawer. More...
 
const Handle< Prs3d_Drawer > & Attributes () const
 Returns the attributes settings. More...
 
virtual void SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes the hilight drawing tool theDrawer. More...
 
const Handle< Prs3d_Drawer > & HilightAttributes () const
 Returns the hilight attributes settings. More...
 
virtual void UnsetHilightAttributes ()
 Clears settings provided by the hilight drawing tool theDrawer. More...
 
void SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
 Sets common entity owner for assembly sensitive object entities. More...
 
const Handle< SelectMgr_EntityOwner > & GetAssemblyOwner () const
 Returns common entity owner if the object is an assembly. More...
 
Bnd_Box BndBoxOfSelected (Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
 Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...
 
- Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_PresentationsPresentations ()
 
PrsMgr_TypeOfPresentation3d TypeOfPresentation3d () const
 Returns information on whether the object accepts display in HLR mode or not. More...
 
virtual void SetTransformPersistence (const Graphic3d_TransModeFlags &aFlag, const gp_Pnt &APoint)
 Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by APoint parameter (except Graphic3d_TMF_TriedronPers flag. More...
 
void SetTransformPersistence (const Graphic3d_TransModeFlags &aFlag)
 Calls previous method with point (0,0,0) More...
 
Graphic3d_TransModeFlags GetTransformPersistenceMode () const
 Gets Transform Persistence Mode for this object. More...
 
gp_Pnt GetTransformPersistencePoint () const
 Gets point of transform persistence for this object. More...
 
void SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType)
 
void SetToUpdate (const Standard_Integer aMode)
 flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More...
 
void SetToUpdate ()
 flags all the Presentations to be Updated. More...
 
void ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
 gives the list of modes which are flagged "to be updated". More...
 
virtual void SetLocalTransformation (const gp_Trsf &theTransformation)
 Sets local transformation to theTransformation. More...
 
Standard_Boolean HasTransformation () const
 Returns true if object has a transformation that is different from the identity. More...
 
const gp_TrsfLocalTransformation () const
 
const gp_TrsfTransformation () const
 
const gp_TrsfInversedTransformation () const
 
virtual void UpdateTransformation (const Handle< Prs3d_Presentation > &P)
 
Graphic3d_ZLayerId ZLayer () const
 Get ID of Z layer. More...
 
virtual void AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
 Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...
 
virtual void RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
 Removes previously added clip plane. More...
 
virtual void SetClipPlanes (const Graphic3d_SequenceOfHClipPlane &thePlanes)
 Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...
 
const Graphic3d_SequenceOfHClipPlaneGetClipPlanes () const
 Get clip planes. More...
 
virtual void SetMutable (const Standard_Boolean theIsMutable)
 Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...
 
const Standard_Boolean IsMutable () const
 Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...
 
virtual void AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
 Makes theObject child of current object in scene hierarchy. More...
 
virtual void RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
 Removes theObject from children of current object in scene hierarchy. More...
 
const PrsMgr_ListOfPresentableObjectsChildren () const
 Returns children of the current object. More...
 
const Standard_Boolean HasOwnPresentations () const
 Returns true if object should have own presentations. More...
 
const PrsMgr_PresentableObjectPointer Parent () const
 Returns parent of current object in scene hierarchy. More...
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const Handle_Standard_Type & DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Protected Member Functions

virtual void ComputePlane ()
 Override this method to compute automatically dimension plane in which the dimension presentation is built. More...
 
virtual Standard_Boolean CheckPlane (const gp_Pln &thePlane) const
 Checks if anchor point and the center of the circle are on the plane. More...
 
virtual Standard_Real ComputeValue () const
 Override this method to computed value of dimension. More...
 
virtual void Compute (const Handle< PrsMgr_PresentationManager3d > &thePresentationManager, const Handle< Prs3d_Presentation > &thePresentation, const Standard_Integer theMode=0)
 Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. aPresentableObject has the display mode aMode; this has the default value of 0, that is, the wireframe display mode. More...
 
Standard_Boolean IsValidCircle (const gp_Circ &theCircle) const
 
Standard_Boolean IsValidAnchor (const gp_Circ &theCircle, const gp_Pnt &thePnt) const
 
- Protected Member Functions inherited from AIS_Dimension
Standard_Real ValueToDisplayUnits () const
 
TCollection_ExtendedString GetValueString (Standard_Real &theWidth) const
 Get formatted value string and its model space width. More...
 
void DrawArrow (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theLocation, const gp_Dir &theDirection)
 Performs drawing of 2d or 3d arrows on the working plane. More...
 
void DrawText (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theTextPos, const gp_Dir &theTextDir, const TCollection_ExtendedString &theText, const Standard_Integer theLabelPosition)
 Performs drawing of 2d or 3d text on the working plane. More...
 
void DrawExtension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Real theExtensionSize, const gp_Pnt &theExtensionStart, const gp_Dir &theExtensionDir, const TCollection_ExtendedString &theLabelString, const Standard_Real theLabelWidth, const Standard_Integer theMode, const Standard_Integer theLabelPosition)
 Performs computing of dimension linear extension with text. More...
 
void DrawLinearDimension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Integer theMode, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False)
 Performs computing of linear dimension (for length, diameter, radius and so on). Please note that this method uses base dimension properties, like working plane flyout length, drawer attributes. More...
 
void ComputeLinearFlyouts (const Handle< SelectMgr_Selection > &theSelection, const Handle< SelectMgr_EntityOwner > &theOwner, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint)
 Compute selection sensitives for linear dimension flyout lines (length, diameter, radius). Please note that this method uses base dimension properties: working plane and flyout length. More...
 
Standard_Boolean InitCircularDimension (const TopoDS_Shape &theShape, gp_Circ &theCircle, gp_Pnt &theMiddleArcPoint, Standard_Boolean &theIsClosed)
 Performs initialization of circle and middle arc point from the passed shape which is assumed to contain circular geometry. More...
 
void PointsForArrow (const gp_Pnt &thePeakPnt, const gp_Dir &theDirection, const gp_Dir &thePlane, const Standard_Real theArrowLength, const Standard_Real theArrowAngle, gp_Pnt &theSidePnt1, gp_Pnt &theSidePnt2)
 Produce points for triangular arrow face. More...
 
gp_Pnt GetTextPositionForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False) const
 Compute point of text position for dimension parameters for linear kinds of dimensions (length, radius, diameter). More...
 
void FitTextAlignmentForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide, const Prs3d_DimensionTextHorizontalPosition &theHorizontalTextPos, Standard_Integer &theLabelPosition, Standard_Boolean &theIsArrowsExternal) const
 Fits text alignment relatively to the dimension line. More...
 
Standard_Boolean AdjustParametersForLinear (const gp_Pnt &theTextPos, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, Standard_Real &theExtensionSize, Prs3d_DimensionTextHorizontalPosition &theAlignment, Standard_Real &theFlyout, gp_Pln &thePlane, Standard_Boolean &theIsPlaneOld) const
 Adjusts aspect parameters according the text position: extension size, vertical text alignment and flyout. More...
 
virtual void ComputeFlyoutSelection (const Handle< SelectMgr_Selection > &, const Handle< SelectMgr_EntityOwner > &)
 Override this method to compute selection primitives for flyout lines (if the dimension provides it). This callback is a only a part of base selection computation routine. More...
 
virtual void ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode)
 Base procedure of computing selection (based on selection geometry data). More...
 
- Protected Member Functions inherited from AIS_InteractiveObject
 AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...
 
- Protected Member Functions inherited from SelectMgr_SelectableObject
 SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 
- Protected Member Functions inherited from PrsMgr_PresentableObject
 PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 
virtual ~PrsMgr_PresentableObject ()
 
virtual void Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Prs3d_Presentation > &aPresentation)
 Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation. It must be redefined to implement hidden line removal for the object. The user never calls this method himself. This is done via the InteractiveContext object and is dependent on the point of view from which the object is displayed. More...
 
virtual void Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Geom_Transformation > &aTrsf, const Handle< Prs3d_Presentation > &aPresentation)
 Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. A point of view is provided by the projector aProjector, and the geometric transformation which has transformed associated presentable objects is specified by aTrsf. This function is to be used in case where a hidden line removal display cannot be calculated automatically. This occurs when associated presentable objects have been transformed geometrically, but not translated. Warning The transformation aTrsf must be applied to the object before computation. More...
 
void Update (const Standard_Boolean AllModes=Standard_False)
 recomputes all presentations of the object. More...
 
void Update (const Standard_Integer aMode, const Standard_Boolean ClearOther)
 Recomputes the presentation in the given mode. If ClearOther is true, other presentation will be cleared. More...
 
virtual void Fill (const Handle< PrsMgr_PresentationManager > &aPresentationManager, const Handle< PrsMgr_Presentation > &aPresentation, const Standard_Integer aMode=0)
 High-level interface for controlling polygon offsets. More...
 
virtual void SetCombinedParentTransform (const gp_Trsf &theTransformation)
 Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...
 
virtual void UpdateClipping ()
 General virtual method for internal update of presentation state when some modifications on list of clip planes occurs. Base implementation propagate clip planes to every presentation. More...
 

Additional Inherited Members

- Public Types inherited from AIS_Dimension
enum  ComputeMode { ComputeMode_All = 0, ComputeMode_Line = 1, ComputeMode_Text = 2 }
 Specifies supported presentation compute modes. Used to compute only parts of presentation for advanced highlighting. More...
 
- Static Public Member Functions inherited from SelectMgr_SelectableObject
static void InitDefaultHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes theDrawer by default hilight settings. More...
 
- Protected Types inherited from AIS_Dimension
enum  GeometryType {
  GeometryType_UndefShapes, GeometryType_Edge, GeometryType_Face, GeometryType_Points,
  GeometryType_Edges, GeometryType_Faces, GeometryType_EdgeFace, GeometryType_EdgeVertex
}
 Geometry type defines type of shapes on which the dimension is to be built. Some type of geometry allows automatic plane computing and can be built without user-defined plane Another types can't be built without user-defined plane. More...
 
enum  LabelPosition {
  LabelPosition_None = 0x00, LabelPosition_Left = 0x01, LabelPosition_Right = 0x02, LabelPosition_HCenter = 0x04,
  LabelPosition_HMask = LabelPosition_Left | LabelPosition_Right | LabelPosition_HCenter, LabelPosition_Above = 0x10, LabelPosition_Below = 0x20, LabelPosition_VCenter = 0x40,
  LabelPosition_VMask = LabelPosition_Above | LabelPosition_Below | LabelPosition_VCenter
}
 Specifies supported at base level horizontal and vertical label positions for drawing extension lines and centered text. More...
 
- Static Protected Member Functions inherited from AIS_Dimension
static Standard_Boolean CircleFromPlanarFace (const TopoDS_Face &theFace, Handle< Geom_Curve > &theCurve, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
 If it is possible extracts circle from planar face. More...
 
static Standard_Boolean CircleFromEdge (const TopoDS_Edge &theEdge, gp_Circ &theCircle, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
 If it is possible extracts circle from the edge. More...
 
- Protected Attributes inherited from AIS_Dimension
struct AIS_Dimension::SelectionGeometry mySelectionGeom
 Sensitive point tolerance for 2d text selection. More...
 
Standard_Real mySelToleranceForText2d
 Sensitive point tolerance for 2d text selection. More...
 
Standard_Real myCustomValue
 Value of the dimension (computed or user-defined). More...
 
Standard_Boolean myIsValueCustom
 Is user-defined value. More...
 
gp_Pnt myFixedTextPosition
 Stores text position fixed by user. More...
 
Standard_Boolean myIsTextPositionFixed
 Is the text label position fixed by user. More...
 
Standard_ExtCharacter mySpecialSymbol
 Special symbol. More...
 
AIS_DisplaySpecialSymbol myDisplaySpecialSymbol
 Special symbol display options. More...
 
GeometryType myGeometryType
 defines type of shapes on which the dimension is to be built. More...
 
gp_Pln myPlane
 Plane where dimension will be built (computed or user defined). More...
 
Standard_Boolean myIsPlaneCustom
 Is plane defined by user (otherwise it will be computed automatically). More...
 
Standard_Real myFlyout
 Flyout distance. More...
 
Standard_Boolean myIsGeometryValid
 Is dimension geometry properly defined. More...
 
- Protected Attributes inherited from AIS_InteractiveObject
Standard_Real myTransparency
 
Quantity_Color myOwnColor
 
Graphic3d_NameOfMaterial myOwnMaterial
 
Standard_Integer myHilightMode
 
Standard_Real myOwnWidth
 
Standard_Boolean myInfiniteState
 
Standard_Boolean hasOwnColor
 
Standard_Boolean hasOwnMaterial
 
Aspect_TypeOfFacingModel myCurrentFacingModel
 
Standard_Boolean myRecomputeEveryPrs
 
TColStd_ListOfInteger myToRecomputeModes
 
- Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection myselections
 
Handle< Prs3d_DrawermyDrawer
 
Handle< Prs3d_DrawermyHilightDrawer
 
Handle< SelectMgr_EntityOwnermyAssemblyOwner
 
- Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_Presentations myPresentations
 
PrsMgr_TypeOfPresentation3d myTypeOfPresentation3d
 
Graphic3d_SequenceOfHClipPlane myClipPlanes
 
Standard_Boolean myIsMutable
 
Graphic3d_ZLayerId myZLayer
 
Standard_Boolean myHasOwnPresentations
 

Detailed Description

Radius dimension. Can be constructued:

Constructor & Destructor Documentation

AIS_RadiusDimension::AIS_RadiusDimension ( const gp_Circ theCircle)

Create radius dimension for the circle geometry.

Parameters
theCircle[in] the circle to measure.
AIS_RadiusDimension::AIS_RadiusDimension ( const gp_Circ theCircle,
const gp_Pnt theAnchorPoint 
)

Create radius dimension for the circle geometry and define its orientation by location of the first point on that circle.

Parameters
theCircle[in] the circle to measure.
theAnchorPoint[in] the point to define the position of the dimension attachment on the circle.
AIS_RadiusDimension::AIS_RadiusDimension ( const TopoDS_Shape theShape)

Create radius dimension for the arbitrary shape (if possible).

Parameters
theShape[in] the shape to measure.

Member Function Documentation

const gp_Pnt& AIS_RadiusDimension::AnchorPoint ( ) const
inline
Returns
anchor point on circle for radius dimension.
virtual Standard_Boolean AIS_RadiusDimension::CheckPlane ( const gp_Pln thePlane) const
protectedvirtual

Checks if anchor point and the center of the circle are on the plane.

Reimplemented from AIS_Dimension.

const gp_Circ& AIS_RadiusDimension::Circle ( ) const
inline
Returns
measured geometry circle.
virtual void AIS_RadiusDimension::Compute ( const Handle< PrsMgr_PresentationManager3d > &  aPresentationManager,
const Handle< Prs3d_Presentation > &  aPresentation,
const Standard_Integer  aMode = 0 
)
protectedvirtual

Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. aPresentableObject has the display mode aMode; this has the default value of 0, that is, the wireframe display mode.

Reimplemented from PrsMgr_PresentableObject.

virtual void AIS_RadiusDimension::ComputePlane ( )
protectedvirtual

Override this method to compute automatically dimension plane in which the dimension presentation is built.

Reimplemented from AIS_Dimension.

virtual Standard_Real AIS_RadiusDimension::ComputeValue ( ) const
protectedvirtual

Override this method to computed value of dimension.

Returns
value from the measured geometry.

Reimplemented from AIS_Dimension.

virtual const TCollection_AsciiString& AIS_RadiusDimension::GetDisplayUnits ( ) const
virtual
Returns
the display units string.

Reimplemented from AIS_Dimension.

virtual const TCollection_AsciiString& AIS_RadiusDimension::GetModelUnits ( ) const
virtual
Returns
the model units string.

Reimplemented from AIS_Dimension.

virtual const gp_Pnt AIS_RadiusDimension::GetTextPosition ( ) const
virtual

Computes absolute text position from dimension parameters (flyout, plane and text alignment).

Reimplemented from AIS_Dimension.

Standard_Boolean AIS_RadiusDimension::IsValidAnchor ( const gp_Circ theCircle,
const gp_Pnt thePnt 
) const
protected
Standard_Boolean AIS_RadiusDimension::IsValidCircle ( const gp_Circ theCircle) const
protected
virtual void AIS_RadiusDimension::SetDisplayUnits ( const TCollection_AsciiString theUnits)
virtual

Reimplemented from AIS_Dimension.

void AIS_RadiusDimension::SetMeasuredGeometry ( const gp_Circ theCircle)

Measure radius of the circle. The dimension will become invalid if the radius of the circle is less than Precision::Confusion().

Parameters
theCircle[in] the circle to measure.
void AIS_RadiusDimension::SetMeasuredGeometry ( const gp_Circ theCircle,
const gp_Pnt theAnchorPoint 
)

Measure radius of the circle and orient the dimension so the dimension lines attaches to anchor point on the circle. The dimension will become invalid if the radius of the circle is less than Precision::Confusion().

Parameters
theCircle[in] the circle to measure.
theAnchorPoint[in] the point to attach the dimension lines.
void AIS_RadiusDimension::SetMeasuredGeometry ( const TopoDS_Shape theShape)

Measure radius on the passed shape, if applicable. The dimension will become invalid if the passed shape is not measurable or if measured diameter value is less than Precision::Confusion().

Parameters
theShape[in] the shape to measure.
virtual void AIS_RadiusDimension::SetModelUnits ( const TCollection_AsciiString theUnits)
virtual

Reimplemented from AIS_Dimension.

virtual void AIS_RadiusDimension::SetTextPosition ( const gp_Pnt )
virtual

Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment.

Parameters
theTextPos[in] the point of text position.

Reimplemented from AIS_Dimension.

const TopoDS_Shape& AIS_RadiusDimension::Shape ( ) const
inline
Returns
the measured shape.

The documentation for this class was generated from the following file: