Open CASCADE Technology  6.9.0
Public Member Functions

Geom2d_Curve Class Referenceabstract

The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows: More...

#include <Geom2d_Curve.hxx>

Inheritance diagram for Geom2d_Curve:
Inheritance graph
[legend]

Public Member Functions

virtual void Reverse ()=0
 Changes the direction of parametrization of <me>. The "FirstParameter" and the "LastParameter" are not changed but the orientation of the curve is modified. If the curve is bounded the StartPoint of the initial curve becomes the EndPoint of the reversed curve and the EndPoint of the initial curve becomes the StartPoint of the reversed curve. More...
 
virtual Standard_Real ReversedParameter (const Standard_Real U) const =0
 Computes the parameter on the reversed curve for the point of parameter U on this curve. Note: The point of parameter U on this curve is identical to the point of parameter ReversedParameter(U) on the reversed curve. More...
 
virtual Standard_Real TransformedParameter (const Standard_Real U, const gp_Trsf2d &T) const
 Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line). More...
 
virtual Standard_Real ParametricTransformation (const gp_Trsf2d &T) const
 Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line). More...
 
Handle< Geom2d_CurveReversed () const
 Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: More...
 
virtual Standard_Real FirstParameter () const =0
 Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite. More...
 
virtual Standard_Real LastParameter () const =0
 Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite. More...
 
virtual Standard_Boolean IsClosed () const =0
 Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp wich is a fixed criterion independant of the application. More...
 
virtual Standard_Boolean IsPeriodic () const =0
 Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic. More...
 
virtual Standard_Real Period () const
 Returns thne period of this curve. raises if the curve is not periodic. More...
 
virtual GeomAbs_Shape Continuity () const =0
 It is the global continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite. More...
 
virtual Standard_Boolean IsCN (const Standard_Integer N) const =0
 Returns true if the degree of continuity of this curve is at least N. Exceptions Standard_RangeError if N is less than 0. More...
 
virtual void D0 (const Standard_Real U, gp_Pnt2d &P) const =0
 Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...
 
virtual void D1 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1) const =0
 Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1. More...
 
virtual void D2 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2) const =0
 Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2. More...
 
virtual void D3 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2, gp_Vec2d &V3) const =0
 Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3. More...
 
virtual gp_Vec2d DN (const Standard_Real U, const Standard_Integer N) const =0
 For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if: More...
 
gp_Pnt2d Value (const Standard_Real U) const
 Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...
 
- Public Member Functions inherited from Geom2d_Geometry
void Mirror (const gp_Pnt2d &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. More...
 
void Mirror (const gp_Ax2d &A)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Rotate (const gp_Pnt2d &P, const Standard_Real Ang)
 Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt2d &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec2d &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
virtual void Transform (const gp_Trsf2d &T)=0
 Transformation of a geometric object. This tansformation can be a translation, a rotation, a symmetry, a scaling or a complex transformation obtained by combination of the previous elementaries transformations. (see class Transformation of the package Geom2d). The following transformations have the same properties as the previous ones but they don't modified the object itself. A copy of the object is returned. More...
 
Handle< Geom2d_GeometryMirrored (const gp_Pnt2d &P) const
 
Handle< Geom2d_GeometryMirrored (const gp_Ax2d &A) const
 
Handle< Geom2d_GeometryRotated (const gp_Pnt2d &P, const Standard_Real Ang) const
 
Handle< Geom2d_GeometryScaled (const gp_Pnt2d &P, const Standard_Real S) const
 
Handle< Geom2d_GeometryTransformed (const gp_Trsf2d &T) const
 
Handle< Geom2d_GeometryTranslated (const gp_Vec2d &V) const
 
Handle< Geom2d_GeometryTranslated (const gp_Pnt2d &P1, const gp_Pnt2d &P2) const
 
virtual Handle< Geom2d_GeometryCopy () const =0
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const
Handle_Standard_Type & 
DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Detailed Description

The abstract class Curve describes the common behavior of curves in 2D space. The Geom2d package provides numerous concrete classes of derived curves, including lines, circles, conics, Bezier or BSpline curves, etc. The main characteristic of these curves is that they are parameterized. The Geom2d_Curve class shows:

Member Function Documentation

virtual GeomAbs_Shape Geom2d_Curve::Continuity ( ) const
pure virtual

It is the global continuity of the curve : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Curve, C2 : continuity of the second derivative all along the Curve, C3 : continuity of the third derivative all along the Curve, G1 : tangency continuity all along the Curve, G2 : curvature continuity all along the Curve, CN : the order of continuity is infinite.

Implemented in Geom2d_BSplineCurve, Geom2d_BezierCurve, Geom2d_OffsetCurve, Geom2d_TrimmedCurve, Geom2d_Line, Geom2d_Conic, Bisector_BisecPC, Bisector_BisecCC, and Bisector_BisecAna.

virtual void Geom2d_Curve::D0 ( const Standard_Real  U,
gp_Pnt2d P 
) const
pure virtual

Returns in P the point of parameter U. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve.

Raised only for the "OffsetCurve" if it is not possible to compute the current point. For example when the first derivative on the basis curve and the offset direction are parallel.

Implemented in Geom2d_BSplineCurve, Geom2d_Hyperbola, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_OffsetCurve, Geom2d_Parabola, Bisector_BisecCC, Bisector_BisecPC, Geom2d_Line, Geom2d_Circle, and Bisector_BisecAna.

virtual void Geom2d_Curve::D1 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1 
) const
pure virtual

Returns the point P of parameter U and the first derivative V1. Raised if the continuity of the curve is not C1.

Implemented in Geom2d_BSplineCurve, Geom2d_Hyperbola, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_OffsetCurve, Geom2d_Parabola, Bisector_BisecCC, Bisector_BisecPC, Geom2d_Line, Geom2d_Circle, and Bisector_BisecAna.

virtual void Geom2d_Curve::D2 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1,
gp_Vec2d V2 
) const
pure virtual

Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the curve is not C2.

Implemented in Geom2d_BSplineCurve, Geom2d_Hyperbola, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_OffsetCurve, Geom2d_Parabola, Bisector_BisecCC, Geom2d_Line, Bisector_BisecPC, Geom2d_Circle, and Bisector_BisecAna.

virtual void Geom2d_Curve::D3 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1,
gp_Vec2d V2,
gp_Vec2d V3 
) const
pure virtual

Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the curve is not C3.

Implemented in Geom2d_BSplineCurve, Geom2d_Hyperbola, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_OffsetCurve, Geom2d_Parabola, Geom2d_Line, Bisector_BisecCC, Bisector_BisecPC, Geom2d_Circle, and Bisector_BisecAna.

virtual gp_Vec2d Geom2d_Curve::DN ( const Standard_Real  U,
const Standard_Integer  N 
) const
pure virtual

For the point of parameter U of this curve, computes the vector corresponding to the Nth derivative. Exceptions StdFail_UndefinedDerivative if:

  • the continuity of the curve is not "CN", or
  • the derivative vector cannot be computed easily; this is the case with specific types of curve (for example, a rational BSpline curve where N is greater than 3). Standard_RangeError if N is less than 1.

Implemented in Geom2d_BSplineCurve, Geom2d_Hyperbola, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_OffsetCurve, Geom2d_Parabola, Geom2d_Line, Bisector_BisecCC, Bisector_BisecPC, Geom2d_Circle, and Bisector_BisecAna.

virtual Standard_Real Geom2d_Curve::FirstParameter ( ) const
pure virtual

Returns the value of the first parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite.

Implemented in Geom2d_BSplineCurve, Geom2d_BezierCurve, Geom2d_OffsetCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_Hyperbola, Geom2d_Parabola, Geom2d_Line, Geom2d_Circle, Bisector_BisecPC, Bisector_BisecCC, and Bisector_BisecAna.

virtual Standard_Boolean Geom2d_Curve::IsClosed ( ) const
pure virtual

Returns true if the curve is closed. Examples : Some curves such as circle are always closed, others such as line are never closed (by definition). Some Curves such as OffsetCurve can be closed or not. These curves are considered as closed if the distance between the first point and the last point of the curve is lower or equal to the Resolution from package gp wich is a fixed criterion independant of the application.

Implemented in Geom2d_BSplineCurve, Geom2d_OffsetCurve, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_Hyperbola, Bisector_BisecPC, Bisector_BisecCC, Geom2d_Parabola, Geom2d_Line, Geom2d_Circle, and Bisector_BisecAna.

virtual Standard_Boolean Geom2d_Curve::IsCN ( const Standard_Integer  N) const
pure virtual

Returns true if the degree of continuity of this curve is at least N. Exceptions Standard_RangeError if N is less than 0.

Implemented in Geom2d_BSplineCurve, Geom2d_OffsetCurve, Geom2d_BezierCurve, Geom2d_TrimmedCurve, Geom2d_Line, Geom2d_Conic, Bisector_BisecPC, Bisector_BisecAna, and Bisector_BisecCC.

virtual Standard_Boolean Geom2d_Curve::IsPeriodic ( ) const
pure virtual

Returns true if the parameter of the curve is periodic. It is possible only if the curve is closed and if the following relation is satisfied : for each parametric value U the distance between the point P(u) and the point P (u + T) is lower or equal to Resolution from package gp, T is the period and must be a constant. There are three possibilities : . the curve is never periodic by definition (SegmentLine) . the curve is always periodic by definition (Circle) . the curve can be defined as periodic (BSpline). In this case a function SetPeriodic allows you to give the shape of the curve. The general rule for this case is : if a curve can be periodic or not the default periodicity set is non periodic and you have to turn (explicitly) the curve into a periodic curve if you want the curve to be periodic.

Implemented in Geom2d_BSplineCurve, Geom2d_OffsetCurve, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_Hyperbola, Bisector_BisecPC, Bisector_BisecCC, Geom2d_Parabola, Geom2d_Line, Geom2d_Circle, and Bisector_BisecAna.

virtual Standard_Real Geom2d_Curve::LastParameter ( ) const
pure virtual

Value of the last parameter. Warnings : It can be RealFirst or RealLast from package Standard if the curve is infinite.

Implemented in Geom2d_BSplineCurve, Geom2d_BezierCurve, Geom2d_OffsetCurve, Geom2d_Ellipse, Geom2d_TrimmedCurve, Geom2d_Hyperbola, Geom2d_Parabola, Geom2d_Line, Geom2d_Circle, Bisector_BisecPC, Bisector_BisecCC, and Bisector_BisecAna.

virtual Standard_Real Geom2d_Curve::ParametricTransformation ( const gp_Trsf2d T) const
virtual

Returns the coefficient required to compute the parametric transformation of this curve when transformation T is applied. This coefficient is the ratio between the parameter of a point on this curve and the parameter of the transformed point on the new curve transformed by T. Note: this function generally returns 1. but it can be redefined (for example, on a line).

Reimplemented in Geom2d_OffsetCurve, Geom2d_TrimmedCurve, Geom2d_Parabola, and Geom2d_Line.

virtual Standard_Real Geom2d_Curve::Period ( ) const
virtual

Returns thne period of this curve. raises if the curve is not periodic.

Reimplemented in Geom2d_OffsetCurve, and Geom2d_TrimmedCurve.

virtual void Geom2d_Curve::Reverse ( )
pure virtual

Changes the direction of parametrization of <me>. The "FirstParameter" and the "LastParameter" are not changed but the orientation of the curve is modified. If the curve is bounded the StartPoint of the initial curve becomes the EndPoint of the reversed curve and the EndPoint of the initial curve becomes the StartPoint of the reversed curve.

Implemented in Geom2d_BSplineCurve, Geom2d_BezierCurve, Geom2d_OffsetCurve, Geom2d_Conic, Geom2d_Line, Geom2d_TrimmedCurve, Bisector_BisecPC, Bisector_BisecAna, and Bisector_BisecCC.

Handle< Geom2d_Curve > Geom2d_Curve::Reversed ( ) const

Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded:

  • the start point of the initial curve becomes the end point of the reversed curve, and
  • the end point of the initial curve becomes the start point of the reversed curve.
  • Reversed creates a new curve.
virtual Standard_Real Geom2d_Curve::ReversedParameter ( const Standard_Real  U) const
pure virtual

Computes the parameter on the reversed curve for the point of parameter U on this curve. Note: The point of parameter U on this curve is identical to the point of parameter ReversedParameter(U) on the reversed curve.

Implemented in Geom2d_BSplineCurve, Geom2d_BezierCurve, Geom2d_Ellipse, Geom2d_Hyperbola, Geom2d_OffsetCurve, Geom2d_Parabola, Geom2d_Conic, Geom2d_Line, Geom2d_TrimmedCurve, Geom2d_Circle, Bisector_BisecPC, Bisector_BisecAna, and Bisector_BisecCC.

virtual Standard_Real Geom2d_Curve::TransformedParameter ( const Standard_Real  U,
const gp_Trsf2d T 
) const
virtual

Computes the parameter on the curve transformed by T for the point of parameter U on this curve. Note: this function generally returns U but it can be redefined (for example, on a line).

Reimplemented in Geom2d_OffsetCurve, Geom2d_TrimmedCurve, Geom2d_Parabola, and Geom2d_Line.

gp_Pnt2d Geom2d_Curve::Value ( const Standard_Real  U) const

Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve.

it is implemented with D0.

Raised only for the "OffsetCurve" if it is not possible to compute the current point. For example when the first derivative on the basis curve and the offset direction are parallel.


The documentation for this class was generated from the following file: